Hi,
One of my friends has just got an Avermedia AverTV USB MCE device (PAL)
http://www.aver.com/2005home/product/tvt...spec.shtml
Its an analog tuner with a hardware MPEG-2 convertor, and has a BDA driver.
I've got a fair idea about how to try and build a BDA entry for a DVB-T device, but I'm not sure if it's even possible to support this device in GB-PVR.
What do you use for TUNING_TYPE for example ?
Any help appreciated
Thanks
Hayden
If it's digital side has BDA drivers, then it should work find with the addition of a new section in BDA.ini.
If the analog side has a hardware MPEG2 encoder, then it might work (if connections are similiar to ATI or Hauppauge or LSI Explorer cards), but would require a section to be added to direct.ini.
Quote:What do you use for TUNING_TYPE for example ?
TUNING_TYPE=DVB-T (bda.ini only applies to the digital side of this device.
Sub,
I've created a new device section for direct.ini
[AverMedia M038]
INIT_MODE=DEFAULT
INIT_MSP=0
FILTER_CROSSBAR=AVerMedia USB Crossbar
FILTER_CAPTURE=AVerMedia USB Capture
FILTER_TV_TUNER=AVerMedia USB TVTuner
FILTER_TV_AUDIO=AVerMedia USB TVAudio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Video Composite In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=MPEG2 Stream Out
PIN_WRITER_INPUT_IN=Input
Cheers,
Hayden
Cheers. I'll add it to the master list.
Has any one used the AVerTV Purity 3D MCE 500 or the AVerTV MCE Media Expansion Card a PCI-E x16 Card I like the latter of ths two since it has all the video out you will ever need.