NextPVR Forums

NextPVR Forums > Public > Hardware > AverMedia USB HDTV settings
Full Version: AverMedia USB HDTV settings
You're currently viewing a stripped down version of our content. View the full version with proper formatting.

whurlston

2007-03-17, 08:19 AM
On the analog side, I almost have this working but there is one set of pins that I cannot get to connect. They are circled in blue in the attached pic. If I start live tv, switch to graphedit and connect to the remote graph, connect the pins and hit "play", I can switch back to GB-PVR every thing works. I'm sure I'm just missing a setting somewhere but I'm at a loss.

[ATTACHMENT NOT FOUND]

My ini entry so far is:

Code:
[AverMedia USB Analog]
INIT_MODE=DEFAULT
INIT_MSP=0
BLACKBIRD=1
DETECT_MSP=0
FILTER_CROSSBAR=AVerMedia USB Analog Crossbar
FILTER_CAPTURE=AVerMedia USB Analog Capture
FILTER_TV_TUNER=AVerMedia USB Analog TVTuner
FILTER_TV_AUDIO=AVerMedia USB Analog TVAudio
FILTER_ENCODER=AVerMedia USB Analog Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Video Composite In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Input1
PIN_CAPTURE_I2S_OUT=Output2
PIN_CAPTURE_656_OUT=Output3
PIN_ENCODER_I2S_IN=Input0
PIN_ENCODER_656_IN=Input1
PIN_ENCODER_OUT=Output2
PIN_WRITER_INPUT_IN=Input

sub

2007-03-17, 04:19 PM
Can you post the GB-PVR logs so I can see if it list anything failing?

whurlston

2007-03-17, 05:28 PM
Fresh set. Started GB-PVR, started live tv (from guide), changed channel.

sub

2007-03-17, 05:52 PM
I know its not a vixs device, but you see if setting INIT_MODE=VIXS makes a difference? This does an extra connection attempt between capture and encoder filters.

whurlston

2007-03-17, 06:00 PM
sub Wrote:I know its not a vixs device, but you see if setting INIT_MODE=VIXS makes a difference? This does an extra connection attempt between capture and encoder filters.
That did the trick. Thanks.

Ini entry for direct.ini:
Code:
[AverMedia USB Analog]
INIT_MODE=VIXS
INIT_MSP=0
BLACKBIRD=1
DETECT_MSP=0
FILTER_CROSSBAR=AVerMedia USB Analog Crossbar
FILTER_CAPTURE=AVerMedia USB Analog Capture
FILTER_TV_TUNER=AVerMedia USB Analog TVTuner
FILTER_TV_AUDIO=AVerMedia USB Analog TVAudio
FILTER_ENCODER=AVerMedia USB Analog Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Video Composite In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Input1
PIN_CAPTURE_I2S_OUT=Output2
PIN_CAPTURE_656_OUT=Output3
PIN_ENCODER_I2S_IN=Input0
PIN_ENCODER_656_IN=Input1
PIN_ENCODER_OUT=Output2
PIN_WRITER_INPUT_IN=Input

And bda.ini (posted in another thread but they really belong here):
Code:
[AVerMedia USB Digital]
TUNING_TYPE=ATSC
FILTER_TUNER=AVerMedia USB Digital Tuner
FILTER_CAPTURE=AVerMedia USB Digital Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport

sub

2007-03-17, 06:07 PM
Great - I'll include it in the master file.

whurlston

2007-03-20, 06:37 AM
Quick note, the driver description is:

AVerMedia USB Video Capture Family Driver (A868/E509/HC80/M038/M039)

So this should work for any of the above models. My Toshiba tuner ended up being the M039.
NextPVR Forums > Public > Hardware > AverMedia USB HDTV settings