I'm having problems getting any output. Everytime i click on the "live tv" button i get a crash in the "debug assertion failed"
..dbgdel.cpp
"_BLOCK_TYPE_IS_VALID(phead -> nBlockUse)"
I'm trying to use an Adaptec VideOh pci card.
When i running the tuning assistant the card is in the list...but it tells me "failed to find crossbar filter. Wrong device type?"
Anyone know if I can use this card, or what the problem might be?
Thanks
Only the VideOh USB version works. The PCI version is not supported. Sorry.
hi sub,
the videoh pci version works with gbpvr, see my posting:
http://gbpvr.com/cgi-bin....;t=3634
i have record over 30 movies with this configuration since
november last year (but never watch live tv).
cu,
rasihasi
hi mryarbles, hi sub
here is my configuration.
I use the release 0.22.7 of gbpvr, installed on W2k prof. with SP4, 128 MB RAM, PIII@500, 60 GB HDD.The zipped attachement contains the CONFIG.XML, the DIRECT.INI an three pictures with configuration details.
In the DIRECT.INI i have changed the this section:
----------- snip --------------
[SETUP-Medium Quality]
VideoResolution=0
BitRate=4000
AudioSampleRate=1
AudioCompression=11
----------- snap ------------------
and
----------- snip -------------------
[Adaptec VideOh]
FILTER_CROSSBAR=Adaptec PCI Crossbar
FILTER_CAPTURE=Adaptec PCI Capture Device
FILTER_TV_TUNER=Adaptec PCI TvTuner
FILTER_TV_AUDIO=Adaptec PCI TvAudio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_WRITER_INPUT_IN=Input
------------- snap ------------------------------------
In the CONFIG.XML i changed the this:
------- snip ------------------------
<PVR350Width>768</PVR350Width>
<PVR350Height>576</PVR350Height>
<PVR350OffsetX>0</PVR350OffsetX>
<PVR350OffsetY>0</PVR350OffsetY>
-------------- snap -------------------
Good luck!
Rasihasi
i'm sorry, my english isn't real well, i know :-)