I have copy and pasted the entries for this tuner card in dba.ini. I am able to select this tuner entry but when scanning for channels to map digital channels it ultimately crashes and freezes.
the card's QAm tuner works fine on BeyondTV
Please help.
This is what I added to bda.ini:
[Hauppauge HVR-950Q]
TUNING_TYPE=ATSC
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
as posted by Sub.
Post the config.exe.log and config.exe-native.log and I'll take a look. Make sure you have the patches from the survival guide thread installed.
superflysocal Wrote:I have copy and pasted the entries for this tuner card in dba.ini. I am able to select this tuner entry but when scanning for channels to map digital channels it ultimately crashes and freezes.
the card's QAm tuner works fine on BeyondTV
Please help.
This is what I added to bda.ini:
[Hauppauge HVR-950Q]
TUNING_TYPE=ATSC
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
as posted by Sub.
If you are trying to get QAM you need the following to be added the above is only for OTA
[Hauppauge HVR-950Q (QAM)]
TUNING_TYPE=ATSC
TUNING_SPECIAL=2
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
This might help, but not sure if not post logs
imagn Wrote:If you are trying to get QAM you need the following to be added the above is only for OTA
[Hauppauge HVR-950Q (QAM)]
TUNING_TYPE=ATSC
TUNING_SPECIAL=2
FILTER_TUNER=WinTV HVR-950 BDA Tuner
FILTER_CAPTURE=WinTV HVR-950 BDA Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
This might help, but not sure if not post logs
Just checked, i did use that in my bda.ini
my config.exe is too long to post. is there a certain part of the log you want me to post?
perhaps this:
Code:
2009-03-26 09:05:54.419 VERBOSE [1] labelAction.Text = Saving new listings and channel information
2009-03-26 09:07:07.606 VERBOSE [1] getValue() loading new key/value into cache: /settings/BDAUsePsiParser
2009-03-26 09:07:07.606 VERBOSE [1] getValue: /settings/BDAUsePsiParser : true
2009-03-26 09:07:07.606 VERBOSE [1] BDA Channel Mapping screen loading...
2009-03-26 09:07:07.606 VERBOSE [1] getValue() loading new key/value into cache: /settings/BDASubmitTuningRequestTwiceOnScan
2009-03-26 09:07:07.606 VERBOSE [1] getValue: /settings/BDASubmitTuningRequestTwiceOnScan : true
2009-03-26 09:07:07.621 VERBOSE [1] getValue cached value: /settings/BDAUsePsiParser : true
2009-03-26 09:07:07.621 VERBOSE [1] Using PSI Parser
2009-03-26 09:07:17.105 VERBOSE [1] ATSC device...
2009-03-26 09:07:18.871 VERBOSE [1] Trying double submit...
2009-03-26 09:07:21.137 VERBOSE [1] getValue() loading new key/value into cache: /settings/BDAPsiScanStartupSeconds
2009-03-26 09:07:21.137 VERBOSE [1] getValue: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:22.152 INFO [1] Tranponder information for: 2,0,0
<transponder>
</transponder>
2009-03-26 09:07:24.418 VERBOSE [1] Trying double submit...
2009-03-26 09:07:26.668 VERBOSE [1] getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:27.668 INFO [1] Tranponder information for: 3,0,0
<transponder>
</transponder>
2009-03-26 09:07:29.949 VERBOSE [1] Trying double submit...
2009-03-26 09:07:32.199 VERBOSE [1] getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:33.215 INFO [1] Tranponder information for: 4,0,0
<transponder>
</transponder>
2009-03-26 09:07:35.480 VERBOSE [1] Trying double submit...
2009-03-26 09:07:37.746 VERBOSE [1] getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:07:38.746 INFO [1] Tranponder information for: 5,0,0
or this:
Code:
</transponder>
2009-03-26 09:13:32.806 VERBOSE [1] Trying double submit...
2009-03-26 09:13:34.931 VERBOSE [1] getValue cached value: /settings/BDAPsiScanStartupSeconds : 1
2009-03-26 09:13:35.931 VERBOSE [1] getValue() loading new key/value into cache: /settings/BDAPsiScanWaitSeconds
2009-03-26 09:13:35.931 VERBOSE [1] getValue: /settings/BDAPsiScanWaitSeconds : 15
2009-03-26 09:13:50.947 INFO [1] Tranponder information for: 68,0,0
<transponder>
<network_id>0</network_id>
<transport_stream_id>103</transport_stream_id>
<original_network_id>0</original_network_id>
<service>
<TSID>0</TSID>
<service_ID>6</service_ID>
<service_type>0</service_type>
<pmt_PID>463</pmt_PID>
<pcr_PID>464</pcr_PID>
<video_PID>464</video_PID>
<audio_PID lang="000" audio_type="0" AC3="true">465</audio_PID>
<scrambled>true</scrambled>
</service>
<service>
<TSID>0</TSID>
<service_ID>1</service_ID>
<service_type>0</service_type>
<pmt_PID>873</pmt_PID>
<pcr_PID>848</pcr_PID>
<video_PID>848</video_PID>
<audio_PID lang="000" audio_type="0" AC3="true">849</audio_PID>
<scrambled>true</scrambled>
</service>
<service>
<TSID>0</TSID>
<service_ID>32769</service_ID>
<service_type>0</service_type>
<pmt_PID>4969</pmt_PID>
<pcr_PID>848</pcr_PID>
<video_PID>848</video_PID>
<audio_PID lang="000" audio_type="0" AC3="true">849</audio_PID>
</service>
<service>
<TSID>0</TSID>
<service_ID>32774</service_ID>
<service_type>0</service_type>
<pmt_PID>4559</pmt_PID>
<pcr_PID>464</pcr_PID>
<video_PID>464</video_PID>
<audio_PID lang="000" audio_type="0" AC3="true">465</audio_PID>
</service>
</transponder>
2009-03-26 09:13:50.947 VERBOSE [1] Adding tuning request: 68,68,6~P:6~V:464~A:465~PMT:463~PCR:464~E:T~N:>68.6 Unknown1* (000(AC3))
2009-03-26 09:13:50.947 VERBOSE [1] Adding tuning request: 68,68,1~P:1~V:848~A:849~PMT:873~PCR:848~E:T~N:>68.1 Unknown2* (000(AC3))
2009-03-26 09:13:50.947 VERBOSE [1] Adding tuning request: 68,68,32769~P:32769~V:848~A:849~PMT:4969~PCR:848~N:>68.32769 Unknown3* (000(AC3))
2009-03-26 09:13:50.947 VERBOSE [1] Adding tuning request: 68,68,32774~P:32774~V:464~A:465~PMT:4559~PCR:464~N:>68.32774 Unknown4* (000(AC3))
I would start a thread in the support section, reproduce your problem on the machine, then zip and attache all files in the devnz/gbpvr/log folder as it will be more visible to everyone