NextPVR Forums

I followed the installation guide, I am using latest GBPVR and latest MVPMCX2, I also have the latest PCH firmware. The only difference I made is I used f:\ for the share instead of C:.

I am able to open the html page, however, choosing gb-pvr through network browser produces "request cannot be processed", choosing GB-PVR, gives me blank screen, then return to home page. My TV Output is set to 1080p in audio/video settings.

PCH works fine with other shares on the same system without a problem.

Your help is appreciated, I have attached the only log I found.

Could you copy and paste the info from

http://forums.gbpvr.com/showpost.php?p=3...ostcount=4 (enter the IP of your PCH)

Also is F: drive a local drive or a share?

Martin

Here is the telnet log. F is local.

mvallevand Wrote:Could you copy and paste the info from

http://forums.gbpvr.com/showpost.php?p=3...ostcount=4 (enter the IP of your PCH)

Also is F: drive a local drive or a share?

Martin

It is looking for c: and gives me error

From the telnet output I think I might now the problem but could you post the output from this fix http://forums.gbpvr.com/showpost.php?p=3...ostcount=5

Martin

I am not sure if there is more, here is the output

Checking for mvpmc share on PVR
mvpmc f:\mvpmc

Checking GB-PVR.html links
c:\mvpmc\GB-PVR.html not found

MAC

GB-PVR Installed c:\Program Files\Devnz\GBPVR\

Checking NMT Version

Checking NMT Display

Calling NMT Source

Did you enter the IP of your PCH?

Martin

Checking for mvpmc share on PVR
mvpmc f:\mvpmc

Checking GB-PVR.html links
c:\mvpmc\GB-PVR.html not found

NMT IP Address: 192.168.1.9 MAC 001B2FE0A5A8

GB-PVR Installed c:\Program Files\Devnz\GBPVR\

Checking NMT Version
01-17-091022-15-POP-403-000

Checking NMT Display
1080p 59.94Hz

Calling NMT Source

BTW, 001B2FE0A5A8 is my wireless bridge MAC, not my PCH one, could that be the issue?

That will be a problem since the syntax checker didn't find that MAC in your config.xml file and GBPVR will treat your NMT as an MVP.

However the biggest problem is what I suspected. You have selected 1080p 59.94Hz as your default (which is actually not an ATSC standard) and that is not a mode I currently support. If you want to continue to use that as your default for mkv, mp4, avi and dvd playback that is fine, but you will need to add -m 1080p to your startmeup and run at 60Mhz with GBPVR.

Martin