Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: NPVR - No streaming server found!

  1. #1
    Join Date
    Aug 2006
    Location
    Salem, Mass, USA
    Posts
    175

    NPVR - No streaming server found!

    Hello all,

    I upgraded NPVR from 1.5.33 to 1.5.36 (using the NMTInstall2 program)

    Set MVP/NMT number of servers to 5 (there are 2 MVPs + 1 M34A NMT)

    At that point I was getting "No streaming server found" on both MVPs

    Searching the forum I found the new mvpmc dongle (12/31/2010 version) which I installed
    * then restarted NPVR services and
    * cold started the MVP
    -- still getting "No streaming server found"

    Repeated attempts at having MVP rescan (to find streaming server) produce no result - except the error message.

    I can confirm that...
    Firewall is set trusted range 192.168.2.1 -- 192.168.2.12
    Router indicates IP for MVP is 192.168.2.6 (verified via MAC addr)
    MVP screen shows same 192.168.2.6

    The IP for the NPVR machine is 192.168.2.4

    The MVP.log says
    ...................................
    [...startup]
    2011-01-31 12:51:45.418 [INFO][4] ServiceLocatorThread() Hostname: tom-hp
    2011-01-31 12:51:45.443 [DEBUG][3] MVP Service Locator will resolve media port: 6337
    2011-01-31 12:51:45.443 [INFO][3] MVP Control thread Listening on port: 5916
    2011-01-31 12:51:45.444 [INFO][6] BOOTPWorkerThread() Hostname: tom-hp
    2011-01-31 12:51:45.460 [INFO][7] MVP Streaming thread Listening on port: 8337
    2011-01-31 12:51:45.460 [DEBUG][7] MVP Service Locator will resolve media port: 8337
    2011-01-31 12:51:45.499 [INFO][4] IP Address 192.168.2.4
    2011-01-31 12:51:45.500 [INFO][6] BOOTPWorkerThread IP Address 192.168.2.4
    2011-01-31 12:53:11.246 [DEBUG][4] Received MVP Service Locator request
    2011-01-31 12:53:11.247 [DEBUG][4] Parsing MVP Service Locator request
    2011-01-31 12:53:11.640 [DEBUG][4] local address: D4:85:64:AC:3F:A4 .... 192.168.2.4
    2011-01-31 12:53:11.645 [DEBUG][4] About construct MVP Service Locator request
    2011-01-31 12:53:11.646 [DEBUG][4] Sending MVP Service Locator response to 602A8C0:16882 (control: 5916, streaming: 8337)
    2011-01-31 12:53:23.785 [DEBUG][4] Received MVP Service Locator request
    2011-01-31 12:53:23.788 [DEBUG][4] Parsing MVP Service Locator request
    2011-01-31 12:53:23.853 [DEBUG][4] local address: D4:85:64:AC:3F:A4 .... 192.168.2.4
    2011-01-31 12:53:23.858 [DEBUG][4] About construct MVP Service Locator request
    2011-01-31 12:53:23.858 [DEBUG][4] Sending MVP Service Locator response to 602A8C0:16882 (control: 5916, streaming: 8337)
    2011-01-31 13:04:51.103 [DEBUG][4] Received MVP Service Locator request
    2011-01-31 13:04:51.104 [DEBUG][4] Parsing MVP Service Locator request
    2011-01-31 13:04:51.272 [DEBUG][4] local address: D4:85:64:AC:3F:A4 .... 192.168.2.4
    2011-01-31 13:04:51.276 [DEBUG][4] About construct MVP Service Locator request
    2011-01-31 13:04:51.276 [DEBUG][4] Sending MVP Service Locator response to 602A8C0:16882 (control: 5916, streaming: 8337)
    -----------------------------------------------------

    The NPVR.log says
    .................................................. ......................
    [...startup]
    2011-01-31 12:52:04.077 [DEBUG][1] Created mutex. Must be only instance.
    2011-01-31 12:52:04.138 [DEBUG][1] Version: 1.5.36
    2011-01-31 12:52:04.139 [DEBUG][1] SingleInstance()
    2011-01-31 12:52:04.315 [INFO][1] About to connect to remote recording service
    2011-01-31 12:52:04.319 [DEBUG][1] RecordingServiceProxy@exit
    2011-01-31 12:52:04.367 [DEBUG][1] About to look for plugin directories in: C:\Users\Public\NPVR\Plugins\
    2011-01-31 12:52:04.368 [DEBUG][1] About to look for plugin directories in: C:\Program Files (x86)\NPVR\Plugins\
    2011-01-31 12:52:04.368 [DEBUG][1] About to check for plugin interfaces in: C:\Program Files (x86)\NPVR\Plugins\Universe\Interop.UPNPLib.dll
    2011-01-31 12:52:04.371 [DEBUG][1] About to check for plugin interfaces in: C:\Program Files (x86)\NPVR\Plugins\Universe\Universe.dll
    2011-01-31 12:52:04.374 [DEBUG][1] About to check for plugin interfaces in: C:\Program Files (x86)\NPVR\Plugins\WebRadio\WebRadio.dll
    2011-01-31 12:52:04.383 [DEBUG][1] Loaded menu item: TV Guide
    2011-01-31 12:52:04.405 [DEBUG][1] Loaded menu item: Recordings
    2011-01-31 12:52:04.412 [DEBUG][1] Loaded menu item: Live TV
    2011-01-31 12:52:04.415 [DEBUG][1] Loaded menu item: Videos
    2011-01-31 12:52:04.419 [DEBUG][1] Loaded menu item: Web Radio
    2011-01-31 12:52:04.425 [DEBUG][1] Loaded menu item: Universe
    2011-01-31 12:52:04.785 [DEBUG][1] LoadChannelListings(channel=7201)
    2011-01-31 12:52:04.796 [DEBUG][1] LoadChannelListings done (listings = 326)
    2011-01-31 12:52:04.798 [DEBUG][1] Element not found: /Skin/Element[@name="ButtonList"]
    2011-01-31 12:52:04.873 [DEBUG][1] LoadChannelListings(channel=7202)
    2011-01-31 12:52:04.880 [DEBUG][1] LoadChannelListings done (listings = 282)
    2011-01-31 12:52:04.880 [DEBUG][1] LoadChannelListings(channel=7203)
    2011-01-31 12:52:04.887 [DEBUG][1] LoadChannelListings done (listings = 285)
    2011-01-31 12:52:04.887 [DEBUG][1] LoadChannelListings(channel=7229)
    2011-01-31 12:52:04.895 [DEBUG][1] LoadChannelListings done (listings = 349)
    2011-01-31 12:52:04.895 [DEBUG][1] LoadChannelListings(channel=7204)
    2011-01-31 12:52:04.906 [DEBUG][1] LoadChannelListings done (listings = 275)
    2011-01-31 12:52:04.906 [DEBUG][1] LoadChannelListings(channel=7213)
    2011-01-31 12:52:04.914 [DEBUG][1] LoadChannelListings done (listings = 298)
    2011-01-31 12:52:04.914 [DEBUG][1] LoadChannelListings(channel=7209)
    2011-01-31 12:52:04.923 [DEBUG][1] LoadChannelListings done (listings = 312)
    2011-01-31 12:52:04.923 [DEBUG][1] LoadChannelListings(channel=7205)
    2011-01-31 12:52:04.933 [DEBUG][1] LoadChannelListings done (listings = 351)
    2011-01-31 12:52:04.941 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBH 2 - 82.1.png
    2011-01-31 12:52:04.941 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBH 2 - 82.1.jpg
    2011-01-31 12:52:04.941 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBH 2 - 82.1.jpeg
    2011-01-31 12:52:04.941 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBH 2 - 82.1.gif
    2011-01-31 12:52:04.945 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WBZ 4 - 82.2.png
    2011-01-31 12:52:04.945 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WBZ 4 - 82.2.jpg
    2011-01-31 12:52:04.945 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WBZ 4 - 82.2.jpeg
    2011-01-31 12:52:04.945 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WBZ 4 - 82.2.gif
    2011-01-31 12:52:04.949 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WCVB 5 - 82.3.png
    2011-01-31 12:52:04.949 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WCVB 5 - 82.3.jpg
    2011-01-31 12:52:04.949 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WCVB 5 - 82.3.jpeg
    2011-01-31 12:52:04.949 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WCVB 5 - 82.3.gif
    2011-01-31 12:52:04.953 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\NECN 6 - 89.6.png
    2011-01-31 12:52:04.953 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\NECN 6 - 89.6.jpg
    2011-01-31 12:52:04.953 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\NECN 6 - 89.6.jpeg
    2011-01-31 12:52:04.953 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\NECN 6 - 89.6.gif
    2011-01-31 12:52:04.956 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WHDH 7 - 82.4.png
    2011-01-31 12:52:04.956 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WHDH 7 - 82.4.jpg
    2011-01-31 12:52:04.956 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WHDH 7 - 82.4.jpeg
    2011-01-31 12:52:04.956 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WHDH 7 - 82.4.gif
    2011-01-31 12:52:04.960 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WPBX (ION) 9 - 83.1.png
    2011-01-31 12:52:04.960 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WPBX (ION) 9 - 83.1.jpg
    2011-01-31 12:52:04.960 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WPBX (ION) 9 - 83.1.jpeg
    2011-01-31 12:52:04.960 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WPBX (ION) 9 - 83.1.gif
    2011-01-31 12:52:04.964 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBX 10 - 82.10.png
    2011-01-31 12:52:04.964 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBX 10 - 82.10.jpg
    2011-01-31 12:52:04.964 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBX 10 - 82.10.jpeg
    2011-01-31 12:52:04.964 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WGBX 10 - 82.10.gif
    2011-01-31 12:52:04.967 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WENH 11 - 82.6.png
    2011-01-31 12:52:04.967 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WENH 11 - 82.6.jpg
    2011-01-31 12:52:04.967 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WENH 11 - 82.6.jpeg
    2011-01-31 12:52:04.967 [DEBUG][1] Looking for: C:\Users\Public\NPVR\Media\Channels\WENH 11 - 82.6.gif
    2011-01-31 12:52:05.036 [DEBUG][1] ACTIVATE_PLUGIN: TV Guide
    2011-01-31 12:52:10.224 [DEBUG][1] Frame Render Rate=96.5568542480469
    2011-01-31 13:01:15.232 [DEBUG][1]
    2011-01-31 13:01:15.233 [DEBUG][1] Setting Net Radio Mode
    2011-01-31 13:01:15.233 [ERROR][1] Cache folder C:\Temp\ not found
    2011-01-31 13:01:15.233 [DEBUG][1] Using C:\Users\tom\AppData\Local\Temp\
    .................................................. .............................


    I really would appreciate some help here as the logs tell me nothing that I can understand by way of problem

    If there's more info needed please advise.

    Most sincerely,
    TomH & Lucille84
    /TomH/ Win7 running nPVR 3.1.1 (via NMTInstall2) on HP p6624y AMD AthlonII 635, 8Gb, 1Tb, HVR-2250 (ATSC) + WebRadio, Universe (broken), BlueRetroVE+, TV Listings. SearchLite Network: Cable Modem - Belkin 54g router - box#1 Win7 Next-PVR 3.1.1, box#2 Win7 wireless laptop, and 2x wired eGreat M34A NMT clients

  2. #2
    Join Date
    May 2006
    Location
    Canada
    Posts
    27,716
    If your NMT is working and the servers are set to 5, I would suspect you don't have config.xml set with the correct dongle name. Either that are your firewall is not configured properly for sending the dongle on tftp by UDP.

    Martin

  3. #3
    Join Date
    Aug 2006
    Location
    Salem, Mass, USA
    Posts
    175
    Martin - thanks for responding,

    I had backed-up the previous dongle.bin (12/23/10 version) then renamed dongle.npvr.bin (12/31/11 version) to dongle.bin

    No, the M34A NMT is not getting to NPVR. Here's what happened from the beginning... after the upgrade, the M34A gave a no share error msg and immediate BSOD to Win7. I found that (after the upgrade) //TOM-HP/mvpmc was no longer shared so I created a new share for that and it eliminated the BSOD.

    The M34A now gives me the HTML page and after waiting the 3-seconds - I get an all white screen which after a while goes to black which after a longer while eventually goes back to the NMT menu - then does it all over again...


    the syntax check gives
    ....................................
    Checking for mvpmc share on TOM-HP
    mvpmc C:\mvpmc

    Checking GB-PVR.html links
    C:\mvpmc \GB-PVR.html not found

    NMT IP Address: 192.168.2.2 MAC 0006DC447A50

    GB-PVR Not Installed

    N-PVR Installed C:\Users\Public\NPVR
    <a href="http://localhost.drives:8883/NETWORK_SHARE/TOM-HP:mvpmc/npvr.cgi">N-PVR</a>
    <a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
    <a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>

    config.xml entry found Client Type PCH2
    MVPSendIncrementalUpdates true
    MVPClientType PCH2
    MVPWidth 1280
    MVPHeight 720
    MVPOffsetX 0
    MVPOffsetY 0

    Enabled true
    Port 8866

    The remote server returned an error: (404) Not Found.

    Checking NMT Version
    50-17-090204-15-EGR-403-073

    Checking NMT Display
    720P 60Hz

    Calling NMT Source
    TOM-HP:hp2-media
    smb://TOM-HP/hp2-media Username: Password Length: 0

    TOM-HP:mvpmc
    smb://TOM-HP/mvpmc Username: Password Length: 0
    .................................................. .............................


    I did another check of IP's and found that there was what I presume is an 'aged' version of npvr.cgi because it had outdated IP's from the initial install back before Christmas - so I edited the npvr.cgi to reflect the new IP for the NPVR server (192.168.2.4) - but still no joy

    There is an C:/etc/mvpmc directory - which is empty

    the c:/mvpmc/npvr.cgi
    ---------------------------------------------------------------
    #!/bin/sh

    echo "Content-Length: 29";
    echo "Content-type: text/html";
    echo "";

    cd ~
    if [ -f /etc/mvpmc/mvpmcx2 ]
    then
    echo "mvmcx2 is loaded";
    else
    mkdir /etc/mvpmc
    mount -t cifs //192.168.2.4/mvpmc /etc/mvpmc -o username=root,rw
    cp /etc/mvpmc/utelnetd /usr/bin
    cp /etc/mvpmc/lircd1 /bin
    killall lircd
    lircd1 &
    ln -s /lib/librmjpeg.so /lib/libjpeg.so.62
    ln -s /lib/librmzlib.so /lib/libz.so
    ln -s /lib/librmzlib.so /lib/libz.so.1
    ln -s /lib/librmzlib.so /lib/libz.so.123
    utelnetd -l /bin/sh -p 23 &
    echo "Telnetd started on port 23............";
    fi
    killall gaya
    sh -c /etc/mvpmc/startmeup 2>/dev/null >/dev/null &
    exit 0;
    --------------------------------------------------------------

    The c:/mvpmc & the c:/etc/mvpmc directories are both shared with: Administrator, Everyone, Guest, tom (which is my login)

    I can't think of anything else except...
    re: you comment "firewall is not configured properly for sending the dongle on tftp by UDP"
    I use ZoneAlarm (free) and could see no reference to "tftp by UDP" so I am at your mercy to provide any kind of pointer for me on that aspect.

    EDIT Except that.. previously the firewall was not prohibiting the M34A from getting to NPVR successfully (before the upgrade)

    Sincere thanks for any additional help you might be able to give,
    /TomH/ Win7 running nPVR 3.1.1 (via NMTInstall2) on HP p6624y AMD AthlonII 635, 8Gb, 1Tb, HVR-2250 (ATSC) + WebRadio, Universe (broken), BlueRetroVE+, TV Listings. SearchLite Network: Cable Modem - Belkin 54g router - box#1 Win7 Next-PVR 3.1.1, box#2 Win7 wireless laptop, and 2x wired eGreat M34A NMT clients

  4. #4
    Join Date
    May 2006
    Location
    Canada
    Posts
    27,716
    Based on the description of your NMT problem, I almost certain it is firewall related. NextPVR.exe has to be allowed UDP and TCP access on your local LAN.

    Martin

  5. #5
    Join Date
    Aug 2006
    Location
    Salem, Mass, USA
    Posts
    175
    Martin,

    I altered the firewall settings so that the local network (Trusted Zone) would have no firewall protection and was iimmediately rewarded - thanks for the good advice. From that point I had the following capabilities on the M34A
    Native NMT
    a. nPVR started and appeared to operate as expected
    b. PlayOn free streamed content started and worked as expected
    NPVR via NMT
    a. Live TV worked
    b. All Recordings .ts played fine
    c. Universe/PlayOn (free streamed content) started and worked

    I then added the NetFlix (Instant Queue) subscription feed to PlayOn - and under NPVR (over M34A), attempts to watch a movie resulted in dead screen. Doing 'Stop' / 'Back' finally got ne back to NMT menu - but trying to reenter NPVR got me a BSOD as a reward.

    After rebooting Win7 - as previously I got BSOD'ed until I reset the mvpmc share yet again. And even after eliminating the BSOD response, I could no longer get NPVR to come up on the NMT.

    Today did a complete reinstall using NMTInstall2.exe (but killing the c:\mvpmc\ directory beforehand)... after setting up mvpmc share on Win7 again...
    1. I can get the native M34A menu and PlayOn with NetFlix is working fine.
    2. NPVR running on the PC runs fine but now the Universe/PlayOn just shows the "Buffered nnnn" screen for a few values of buffered then reverts the underlying screen.
    3. But, no NPVR on the NMT - by that I mean: after selecting the mvpmc share onm the NMT menu, it renders the index.HTML file but it just
    goes to black, waits a minute comes back to the NMT menu.

    Would really appreciate any ideas you might have based on the info above NMT Syntax Check and share log follows

    Here's the NMTChecker output...
    ------------------------------------------------------------
    Checking for mvpmc share on TOM-HP
    mvpmc C:\mvpmc

    Checking GB-PVR.html links
    C:\mvpmc \GB-PVR.html not found

    NMT IP Address: 192.168.2.2 MAC 0006DC447A50

    GB-PVR Not Installed

    N-PVR Installed C:\Users\Public\NPVR
    <a href="http://localhost.drives:8883/NETWORK_SHARE/TOM-HP:mvpmc/npvr.cgi">N-PVR</a>
    <a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
    <a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>

    config.xml entry found Client Type PCH2
    MVPSendIncrementalUpdates true
    MVPClientType PCH2
    MVPWidth 1280
    MVPHeight 720
    MVPOffsetX 0
    MVPOffsetY 0

    Enabled true
    Port 8866

    The remote server returned an error: (404) Not Found.

    Checking NMT Version
    50-17-090204-15-EGR-403-073

    Checking NMT Display
    720P 60Hz

    Calling NMT Source
    TOM-HP:hp2-media
    smb://TOM-HP/hp2-media Username: Password Length: 0

    TOM-HP:mvpmc
    smb://TOM-HP/mvpmc Username: Password Length: 0

    ----------------------------------------------------------------------

    The mvpmc share.log....
    ----------------------------------------------------------------------
    C:\mvpmc BUILTIN\Administrators (ID)F
    BUILTIN\Administrators (OI)(CI)(IO)(ID)F
    NT AUTHORITY\SYSTEM (ID)F
    NT AUTHORITY\SYSTEM (OI)(CI)(IO)(ID)F
    BUILTIN\Users (OI)(CI)(ID)R
    NT AUTHORITY\Authenticated Users (ID)C
    NT AUTHORITY\Authenticated Users (OI)(CI)(IO)(ID)C

    processed dir: C:\mvpmc
    processed file: C:\mvpmc\dxwebsetup.exe
    processed file: C:\mvpmc\mvpmcx2
    processed file: C:\mvpmc\mvpmcx2o.7z
    processed file: C:\mvpmc\NMTInstall.xml
    processed file: C:\mvpmc\NPVRSetup.exe
    processed file: C:\mvpmc\NShared.zip
    processed file: C:\mvpmc\share.log
    processed dir: C:\mvpmc\Temp
    mvpmc was shared successfully.
    ---------------------------------------------------------------

    Sincere thanks for any ideas you can give,
    TomH / Lucille84
    /TomH/ Win7 running nPVR 3.1.1 (via NMTInstall2) on HP p6624y AMD AthlonII 635, 8Gb, 1Tb, HVR-2250 (ATSC) + WebRadio, Universe (broken), BlueRetroVE+, TV Listings. SearchLite Network: Cable Modem - Belkin 54g router - box#1 Win7 Next-PVR 3.1.1, box#2 Win7 wireless laptop, and 2x wired eGreat M34A NMT clients

  6. #6
    Join Date
    May 2006
    Location
    Canada
    Posts
    27,716
    You really shouldn't have deleted the mvpmc share because you also removed guest access, which would show like this in cacls

    Code:
    C:\mvpmc          EMVEEPEE\Guest:(OI)(CI)R
    If you are getting BSOD's in Windows something has got to be wrong with your NextPVR config, your logs would be needed.

    If Universe/PlayOn/Netflix don't connect that sounds like a firewall problem (or your Netflix account info is set incorrectly.

    I'm surprised PlayOn works on your NMT. If hangs for me after playing on show and I have to reboot.

    Martin

  7. #7
    Join Date
    Aug 2006
    Location
    Salem, Mass, USA
    Posts
    175
    Martin,
    I'm going to reply to one of your points at a time - so I can reproduce things and get logs as I go through them...

    On 'Guest' access - I had presumed that a complete NMTInstall2 reinstall (including mvpmc) that all needed shares would have been reste during (re)install

    As of now the cacls says
    ---------------------------------------
    Code:
    C:\>cacls mvpmc
    C:\mvpmc tom-hp\tom:(OI)(CI)F
             BUILTIN\Administrators:(OI)(CI)F
             BUILTIN\Administrators:F
             BUILTIN\Administrators:(OI)(CI)(IO)F
             NT AUTHORITY\SYSTEM:F
             NT AUTHORITY\SYSTEM:(OI)(CI)(IO)F
             tom-hp\Guest:(OI)(CI)F
             Everyone:(OI)(CI)F
    -----------------------------------------------

    Is this correct?

    More to come, thanks - TomH
    /TomH/ Win7 running nPVR 3.1.1 (via NMTInstall2) on HP p6624y AMD AthlonII 635, 8Gb, 1Tb, HVR-2250 (ATSC) + WebRadio, Universe (broken), BlueRetroVE+, TV Listings. SearchLite Network: Cable Modem - Belkin 54g router - box#1 Win7 Next-PVR 3.1.1, box#2 Win7 wireless laptop, and 2x wired eGreat M34A NMT clients

  8. #8
    Join Date
    May 2006
    Location
    Canada
    Posts
    27,716
    That is better. NMTInstall2 does run cacls but Guest sharing needs more than this maybe even a reboot in 64 bit.

    Martin

  9. #9
    Join Date
    Aug 2006
    Location
    Salem, Mass, USA
    Posts
    175
    Okay, here's part 2 - the BSOD logs

    After I sent the above cacls info I started M34A and attempted to connect to the mvpmc share and got instant BSOD - so the attached logs are 'fresh' so to speak

    More anon,
    TomH
    /TomH/ Win7 running nPVR 3.1.1 (via NMTInstall2) on HP p6624y AMD AthlonII 635, 8Gb, 1Tb, HVR-2250 (ATSC) + WebRadio, Universe (broken), BlueRetroVE+, TV Listings. SearchLite Network: Cable Modem - Belkin 54g router - box#1 Win7 Next-PVR 3.1.1, box#2 Win7 wireless laptop, and 2x wired eGreat M34A NMT clients

  10. #10
    Join Date
    May 2006
    Location
    Canada
    Posts
    27,716
    Sorry, by BSOD is that on the PC or EGreat?

    Martin

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •