Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 35

Thread: Problems Playing on PCH-A100 but OK on the PC

  1. #11
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    Hi Martin

    I have a log, but I am not sure if it is taken correctly.

    The reasons I say this are
    (a) Because I simply could not seem to start putty from the native PCH screen. It just jumps out of putty, or if I select leave the window open says inactive. I used telnet port 23, SSH says connection refused. So I issued commands from the NVPVR screen which comes up quite happily.
    (b) My dir is /etc/mvpmc/mvpmcx2 (it is on a USB Stick, always has been).
    (c) Having gone in and issued that it gives a whole lot of 1980's looking text, the TV screen goes black, and NVPVR never appears, nor does the PCH menu. i.e. nada.

    There are a couple of system is going down messages ... very comforting.

    I hope the attached might help ?

    k.
    Last edited by jksmurf; 2014-09-08 at 11:00 PM.
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

  2. #12
    Join Date
    May 2006
    Location
    Canada
    Posts
    29,127
    Sorry you should have searched you need to run /etc/mvpmc/mvpmcx2

    Martin

  3. #13
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    I issued it again after the first run, without changing anything - DRAM error perhaps?

    Code:
    =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2014.09.09 07:01:44 =~=~=~=~=~=~=~=~=~=~=~=
    
    
    BusyBox v1.5.0 (2010-05-11 10:32:33 MYT) Built-in shell (ash)
    Enter 'help' for a list of built-in commands.
    
    / # /etc/mvpmc/mvpmcx2
    DFB: tv mode 18
    vmode 18
    killall: wget: no process killed
    killall: gaya: no process killed
    (*) DirectFB/Config: Active DTV standard hdtv60
    (*) DirectFB/Config: Active DTV signal sdtv
    (*) DirectFB/Config: Active DTV connector hdmi
    (*) DirectFB/Config: Active Component standard hdtv60
    (*) DirectFB/Config: Active Component signal sdtv
    (*) DirectFB/Config: Active Component connector ycrcb
    (*) DirectFB/Config: Active Analog standard ntsc
    (*) DirectFB/Config: Active Analog signal ntsc
    (*) DirectFB/Config: Active Analog connector cvbs
    (*) DirectFB/Config: Driver options file /etc/smp8634rc
    (!) DirectFB/Config: Unable to open config file `//.directfbrc'!
    (*) DirectFB/Config: Active DTV standard hdtv50
    (*) DirectFB/Config: Active Component standard hdtv50
    (*) DirectFB/Config: Active Analog standard pal
    (*) DirectFB/Config: Active Analog signal pal
    (*) DirectFB/Config: Active DTV signal 1080i
     hdtv50 1280x720
    
         =======================|  DirectFB 1.0.0  |=======================
              (c) 2001-2007  The DirectFB Organization (directfb.org)
              (c) 2000-2004  Convergence (integrated media) GmbH
            ------------------------------------------------------------
    
    (*) DirectFB/Core: Single Application Core. (2011-03-14 09:27) 
    (!) System initialised
    (*) Direct/Thread: Running 'EM86 Input' (INPUT, 1246)...
    (*) DirectFB/Input: EM86xx remote control 0.1 (SigmaDesigns)
    (!) Driver getting globals=0x662be8
    [src/mem_mngr.c:325] 
    
    
    Platform configuration:
            DRAM0 = 128 MB, DRAM1 = 128 MB
    
    
    [src/mem_mngr.c:331] DCC-HD memory configuration:
            Unmapped: DRAM0 = 0.0 MB,       DRAM1 = 10.9 MB
            Mapped:   DRAM0 = 0.0 MB,       DRAM1 = 44.9 MB
    [src/mem_mngr.c:335] MMAP_DRAM0_UNMAPPED_BASE = 0x1
    [src/mem_mngr.c:335] MMAP_JPEG_BASE = 0xae040e
    [src/mem_mngr.c:335] MMAP_MONO_BASE = 0x40a
    [src/mem_mngr.c:335] MMAP_MONO_EXT_BASE = 0xd5440e
    [src/mem_mngr.c:335] MMAP_VIDEO_1_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_AUDIO_0_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_AUDIO_0_SHADOW_BASE = 0xd5400e
    [src/mem_mngr.c:335] MMAP_AUDIO_1_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_AUDIO_1_SHADOW_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_DRAM0_MEMPOOL_UNMAPPED_BASE = 0x2
    [src/mem_mngr.c:335] MMAP_DEMUX_BASE = 0x80000b
    [src/mem_mngr.c:335] MMAP_DEMUX_OUTPUT_BASE = 0xa6000b
    [src/mem_mngr.c:335] MMAP_MISC_BASE = 0xaa000b
    [src/mem_mngr.c:335] MMAP_DRAM1_UNMAPPED_BASE = 0x9
    [src/mem_mngr.c:335] MMAP_VIDEO_0_BASE = 0xa
    [src/mem_mngr.c:335] MMAP_SPU_BASE = 0x50000a
    [src/mem_mngr.c:335] MMAP_VIDEO_2_BASE = 0x80000a
    [src/mem_mngr.c:335] MMAP_VIDEO_3_BASE = 0x100000a
    [src/mem_mngr.c:335] MMAP_VIDEO_4_BASE = 0x180000a
    [src/mem_mngr.c:335] MMAP_DRAM1_MEMPOOL_UNMAPPED_BASE = 0x80000a
    [src/mem_mngr.c:335] MMAP_DRAM0_BASE = 0x5
    [src/mem_mngr.c:335] MMAP_CPS_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_DirectFB_BASE = 0xfc800e
    [src/mem_mngr.c:335] MMAP_DRAM0_MEMPOOL_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_DRAM1_BASE = 0xae000d
    [src/mem_mngr.c:335] MMAP_DRAM1_MEMPOOL_BASE = 0x37c800e
    [src/mem_mngr.c:335] MMAP_DCCHD_DATA_BASE = 0x37c800f
    [src/mem_mngr.c:335] MMAP_IG_DB_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_IG_PLANE_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_PG_DB_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_PG_EB_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_PG_CB_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_IG_CB_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_TS_EB_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_TS_FONT_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_BDMV_SOUND_BASE = 0x6
    [src/mem_mngr.c:335] MMAP_PG_PLANE_BASE = 0xae000e
    [src/mem_mngr.c:335] MMAP_IG_EB_BASE = 0xae000e
    [src/mem_mngr.c:398] !!! FAILED to allocate 0x2ce8002 bytes (44.906250 MBs) in dram 1, aborting !!!
    [src/mem_mngr.c:856] DCC-HD MRUA memory allocator uninitalized
    (!) DirectFB/Core: Could not initialize 'gfxcard' core!
        --> Out of video memory!
    (!) System is going down !!
    (!) System is down!!
    src/dfb.c <229>:
            (#) DirectFBError [DirectFBCreate( &dfb )]: Out of video memory!
    / # 
    / #
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

  4. #14
    Join Date
    May 2006
    Location
    Canada
    Posts
    29,127
    Reboot and try again

    Martin

  5. #15
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    Any help?
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

  6. #16
    Join Date
    May 2006
    Location
    Canada
    Posts
    29,127
    It looks your tv is off and you weren't at the nmt main menu.


    Code:
    [HDMI] Receiver is now unavailable
    
      HH  HH  HHHHH   HH   HH  HHHH      HHHH   HHHHHH  HHHHHH
      HH  HH  HH  HH  HHH HHH   HH      HH  HH  HH      HH    
      HHHHHH  HH  HH  HH H HH   HH      HH  HH  HHFFF   HHFFF 
      HH  HH  HH  HH  HH   HH   HH      HH  HH  HH      HH    
      HH  HH  HHHHH   HH   HH  HHHH      HHHH   HH      HH

  7. #17
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    Hmmm. The TV is definitely on. I didn't turn it off, and although it is sometimes a bit sticky to turn on (Panasonic Viera), it has never turned off by itself.

    Regarding NMT main menu, I can't run telnet while at that menu, it simply bails out of Putty.
    Or did you mean it doesn't go back there?

    by NMT Main menu, can you pelase describe which screen, I am on the Media Source screen when it bails.

    Does this help at all btw?

    Code:
    GB-PVR Not Installed
    
    N-PVR Installed C:\Users\Public\NPVR
    <a href="http://localhost.drives:8883/NETWORK_SHARE/SMURFPC:mvpmc/npvr.cgi">N-PVR</a>
    <a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
    <a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>
    
    config.xml entry found Client Type PCH2
    MVPName Popcornhour
    MVPClientType PCH2
    MVPWidth 1180
    MVPHeight 680
    MVPOffsetX 40
    MVPOffsetY 32
    MVPSendIncrementalUpdates true
    MVPAspectRatio default
    MVPSkin Default
    
    Enabled true
    Port 8866
    
    The remote server returned an error: (500) Internal Server Error.
    
    Checking NMT Version
    01-17-110314-15-POP-402-000
    
    Checking NMT Display
    1080i 50Hz
    
    Calling NMT Source
    SMURFPC:mvpmc
    smb://SMURFPC/mvpmc Username:  Password Length: 0 
    
    SMURFPC:GBPVRVids
    smb://SMURFPC/GBPVRVids Username:  Password Length: 0 
    
    SMURFPC:GBPVRDVDs
    smb://SMURFPC/GBPVRDVDs Username:  Password Length: 0 
    
    SMURFPC:MaxKatMovies
    smb://SMURFPC/MaxKatMovies Username:  Password Length: 0 
    
    SMURFPC:Videos
    smb://smurfpc/videos Username:  Password Length: 0
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

  8. #18
    Join Date
    May 2006
    Location
    Canada
    Posts
    29,127
    Reboot the nmt, start mvpmcx2 to get telnet going and power key back to the nmt menu

    Perhaps your hdmi cable is causing problems?

    For the syntax check this message from the web server is new to me

    The remote server returned an error: (500) Internal Server Error.


    Martin

  9. #19
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    I have to shoot out for a couple of hours, I tried what you asked and did get back to the NMT screen, then tried to play a file. Screen went black. Any help here?
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

  10. #20
    Join Date
    Jul 2005
    Location
    HK - Pal I
    Posts
    3,465
    btw I also tried the component cable connection to the same TV; same bail out of NPVR after 5~7 secs of playing :-(
    Very odd.
    ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | Various HD's | AC86U | USB-UIRT | PCH-A110 | RPi2 | Sony Bravia LCD X9000F Android TV |. Frustrated that NextPVR is not working? Take a moment and consider this and this and this and this and this and this. Credit where credit's due; for one guy (with a wife and two kids), most problems are solved outrageously quickly. Patience.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •