Results 1 to 2 of 2

Thread: Windows Server 2012 not supported?

  1. #1
    Join Date
    Feb 2019
    Location
    Germany
    Posts
    1

    Windows Server 2012 not supported?

    Hi,

    I just discovered NextPVR and successfully installed it with my network and my tuner hardware on a Win7 32-bit laptop computer. I was able to install, configure tuners, scan for channels, get EPG and record a show.

    I then seemingly installed NextPVR 4.23 on my Win2012R2 server, my tuner hardware showed up (two instances of two tuner hardware AVM Fritz!box 6490 cable, AVM Fritz!W-LAN repeater DVB-C). But I wasn't able to scan for channels.
    When trying, I got an error "Unable to start device".

    I also was not able to stop the PVR Recording service. When I tried, the error message was:

    Code:
    Unable to stop service: System.InvalidOperationException: Der Dienst NPVR Recording Service auf dem Computer . kann nicht beendet werden ---> System.ComponentModel.Win32Exception: Der Dienst kann zurzeit keine Steuerungsmeldungen annehmen
    --- Ende der internen Ausnahmestapelüberwachung ---
    bei System.ServiceProcess.ServiceController.Stop()
    bei NCtrl.Program.Mai(String[] args)
    I have my firewalls permanently disabled, I was able to reach the https localhost release notes URL mentioned in another thread. I restarted the server.


    The part of the logs which looks relevant is:

    Code:
    2019-02-05 16:35:12.218	[DEBUG][1]	Detected SAT>IP server desc:
    <?xml version="1.0"?>
    <root xmlns="urn:schemas-upnp-org:device-1-0" configId="0">
    <specVersion>
    <major>1</major>
    <minor>0</minor>
    </specVersion>
    <device>
    <deviceType>urn:ses-com:device:SatIPServer:1</deviceType>
    <friendlyName>FRITZ!Box 6490 Cable (kdg)</friendlyName>
    <manufacturer>AVM Berlin</manufacturer>
    <manufacturerURL>http://www.avm.de</manufacturerURL>
    <modelDescription>FRITZ!Box 6490 Cable (kdg)</modelDescription>
    <modelName>FRITZ!Box 6490 Cable (kdg)</modelName>
    <modelNumber>kdg</modelNumber>
    <modelURL>http://www.avm.de</modelURL>
    <serialNumber></serialNumber>
    <UDN>uuid:663d5d6c-f9f8-4bb4-84d4-C80E1466A4A8</UDN>
    <iconList>
    </iconList>
    <serviceList>
    <service>
    <serviceType>urn:ses-com:service:satip:1</serviceType>
    <serviceId>urn:ses-com:serviceId:satip</serviceId>
    <controlURL>/upnp/control/satip</controlURL>
    <eventSubURL>/upnp/control/satip</eventSubURL>
    <SCPDURL>/satipSCPD.xml</SCPDURL>
    </service>
    </serviceList>
    <presentationURL>http://192.168.94.254</presentationURL>
    <satip:X_SATIPCAP xmlns:satip="urn:ses-com:satip">DVBC-2</satip:X_SATIPCAP>
    </device>
    </root>
    
    2019-02-05 16:35:12.265	[DEBUG][1]	X_SATIPCAP: DVBC-2
    2019-02-05 16:35:12.265	[DEBUG][1]	this is a new device
    2019-02-05 16:35:12.265	[DEBUG][1]	host: 192.168.94.254:1
    2019-02-05 16:35:12.265	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:35:12.265	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.265	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.265	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!Box 6490 Cable (kdg) (663d5d6c-f9f8-4bb4-84d4-C80E1466A4A8)'
    2019-02-05 16:35:12.265	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!Box 6490 Cable (kdg) (663d5d6c-f9f8-4bb4-84d4-C80E1466A4A8)'
    2019-02-05 16:35:12.468	[DEBUG][1]	host: 192.168.94.254:2
    2019-02-05 16:35:12.468	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:35:12.484	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.484	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.484	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!Box 6490 Cable (kdg) (663d5d6c-f9f8-4bb4-84d4-C80E1466A4A8)'
    2019-02-05 16:35:12.656	[DEBUG][1]	Detected SAT>IP server desc:
    <?xml version="1.0"?>
    <root xmlns="urn:schemas-upnp-org:device-1-0" configId="0">
    <specVersion>
    <major>1</major>
    <minor>0</minor>
    </specVersion>
    <device>
    <deviceType>urn:ses-com:device:SatIPServer:1</deviceType>
    <friendlyName>FRITZ!WLAN Repeater DVB-C</friendlyName>
    <manufacturer>AVM Berlin</manufacturer>
    <manufacturerURL>http://www.avm.de</manufacturerURL>
    <modelDescription>FRITZ!WLAN Repeater DVB-C</modelDescription>
    <modelName>FRITZ!WLAN Repeater DVB-C</modelName>
    <modelNumber>avm</modelNumber>
    <modelURL>http://www.avm.de</modelURL>
    <serialNumber></serialNumber>
    <UDN>uuid:663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF</UDN>
    <iconList>
    </iconList>
    <serviceList>
    <service>
    <serviceType>urn:ses-com:service:satip:1</serviceType>
    <serviceId>urn:ses-com:serviceId:satip</serviceId>
    <controlURL>/upnp/control/satip</controlURL>
    <eventSubURL>/upnp/control/satip</eventSubURL>
    <SCPDURL>/satipSCPD.xml</SCPDURL>
    </service>
    </serviceList>
    <presentationURL>http://192.168.94.48</presentationURL>
    <satip:X_SATIPCAP xmlns:satip="urn:ses-com:satip">DVBC-2</satip:X_SATIPCAP>
    </device>
    </root>
    
    2019-02-05 16:35:12.656	[DEBUG][1]	X_SATIPCAP: DVBC-2
    2019-02-05 16:35:12.656	[DEBUG][1]	this is a new device
    2019-02-05 16:35:12.656	[DEBUG][1]	host: 192.168.94.48:1
    2019-02-05 16:35:12.656	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:35:12.672	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.672	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:35:12.875	[DEBUG][1]	host: 192.168.94.48:2
    2019-02-05 16:35:12.875	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:35:12.875	[DEBUG][1]	Found existing SAT>IP device with host: 'FRITZ!WLAN Repeater DVB-C (663d5d6c-f9f8-4bb4-84d4-7CFF4DF63CDF)'
    2019-02-05 16:37:31.787	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:37:31.927	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:37:52.350	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:38:06.570	[DEBUG][1]	loading new bitmap data for: Background
    2019-02-05 16:38:06.585	[DEBUG][1]	loading new bitmap data for: DateTime
    2019-02-05 16:38:15.429	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:38:15.492	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:38:28.352	[DEBUG][1]	ScanDropTime: 1000
    2019-02-05 16:38:28.414	[INFO][7]	DigitalRecorder.StartStream(c:\nowhere\scan.ts)
    2019-02-05 16:38:28.414	[DEBUG][7]	CaptureSource.LoadAll()
    2019-02-05 16:38:28.430	[DEBUG][7]	SAT>IP uri: freq=114&sr=6900&mtype=256qam&msys=dvbc&pids=0,16,17,18
    2019-02-05 16:38:29.946	[INFO][7]	Creating BDA graph.
    2019-02-05 16:38:30.024	[INFO][5]	SAT>IP locked=False, level=44, quality=0
    2019-02-05 16:38:30.024	[DEBUG][7]	FindFilterByName failed to locate filter: MPEG-2 Demultiplexer
    2019-02-05 16:38:30.039	[ERROR][7]	Unexpected error building digital graph: System.NullReferenceException: Der Objektverweis wurde nicht auf eine Objektinstanz festgelegt.
       bei DShowHelper.ConnectPins(IGraphBuilder* pGB, IBaseFilter* pSourceFilter, Char* pinNameSource, IBaseFilter* pDestFilter)
       bei Native.DigitalRecorderBase.BuildGraph(String deviceFilter, Int32 deviceInstance, Int32 commonInterface, Int32 commonInterfaceInstances, String& message)
       bei NShared.DigitalRecorder.StartStream(ChannelMapping channelMapping, String target, String& reason)
    2019-02-05 16:38:35.118	[INFO][5]	SAT>IP locked=False, level=37, quality=86
    2019-02-05 16:38:35.399	[INFO][1]	DigitalRecorder.StopAllStreams()
    2019-02-05 16:38:35.415	[ERROR][5]	Unexpected error in RTSPKeepAlive  (terminating thread): System.Threading.ThreadAbortException: Der Thread wurde abgebrochen.
       bei System.Threading.Thread.SleepInternal(Int32 millisecondsTimeout)
       bei System.Threading.Thread.Sleep(Int32 millisecondsTimeout)
       bei NShared.DigitalRecorder.RTSPKeepAlive()
    2019-02-05 16:38:36.571	[DEBUG][1]	CaptureSource.LoadAll()
    2019-02-05 16:42:08.783	[DEBUG][1]	/Settings/General/ShowNewInGuide is set to False
    2019-02-05 16:42:08.783	[DEBUG][1]	loading new bitmap data for: DateTime
    2019-02-05 16:42:10.955	[DEBUG][1]	storing Position (1):156,156
    2019-02-05 16:42:10.955	[DEBUG][1]	storing Size (1):789,473
    2019-02-05 16:42:10.986	[INFO][1]	Exiting...
    2019-02-05 16:42:10.986	[INFO][1]	Done.
    Can you please help me finding a way to support my setup?

  2. #2
    Join Date
    Nov 2003
    Location
    NextPVR HQ, Wellington, New Zealand
    Posts
    87,880
    Basically it's failing to load the Microsoft's "MPEG-2 Demultiplexer" component, which isn't available on Windows Server by default. If you google "how to add bda support to Windows 2012", you'll find instructions for adding these components to Windows Server.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •