Another wake post

[gazoo]

I have an xp box (listed in sig) that was working FLAWLESSLY for sleep/wake up until I upgraded from .9 to .13 pvrx2. After that, it would work about 40% of the time. When it wakes, in .13 I get the desktop for 5 secs or so and it MAY decide to restart pvrx2. Most of the time, I just stay dumped into the desktop. Actually, it's ALL of the time now.

Anyone have any ideas or suggestions as to why this is happening now on .13 but NEVER happened on .9? Any corrective actions (please don't suggest the 15 or so different wake programs and procedures because I'll scream :p ) I mean, if there's an easy program or two that's ok - but what I've read in the past seems to indicate a real pain in the butt to get going.

[martint123]

I take it you mean on your client. Anything in your logs? I've just tried it a few times on mine and get this in the pvrx2.exe-1.log It looks like it has to shut down and restart pvrx2 (and writes a new log for the new startup). It is almost the same for me in standby and hibernate - the pvrx2 screen is blank with no windows borders and then it closes and restarts.

2008-07-07 13:58:02.953 VERBOSE [1] System is going to low power state...
2008-07-07 14:03:02.500 VERBOSE [1] HideMouse ref=-1
2008-07-07 14:03:02.515 VERBOSE [1] flushDatabaseConnections()
2008-07-07 14:03:02.625 VERBOSE [1] getValue() loading new key/value into cache: /settings/ScreenSaverMoveFrequency
2008-07-07 14:03:02.625 VERBOSE [1] getValue: /settings/ScreenSaverMoveFrequency : 10
2008-07-07 14:03:02.625 VERBOSE [1] Skinhelper loading image from file: C:\Program Files\Devnz\GBPVR\skin2\blue\screen saver\Logo.png
2008-07-07 14:03:11.609 VERBOSE [1] flushDatabaseConnections()
2008-07-07 14:03:11.734 VERBOSE [1] System is waking from low power state...
2008-07-07 14:03:11.734 VERBOSE [1] getValue() loading new key/value into cache: /settings/RestartAfterPowerup
2008-07-07 14:03:11.734 VERBOSE [1] getValue: /settings/RestartAfterPowerup : true
2008-07-07 14:03:11.734 VERBOSE [1] Needs restart...
2008-07-07 14:03:11.734 VERBOSE [1] Dropping database connections...
2008-07-07 14:03:11.734 VERBOSE [1] flushDatabaseConnections()
2008-07-07 14:03:11.734 VERBOSE [1] Doing immediate restart...
2008-07-07 14:03:11.734 VERBOSE [1] getValue() loading new key/value into cache: /settings/FSERestartDelay
2008-07-07 14:03:11.734 VERBOSE [1] getValue: /settings/FSERestartDelay : 500
2008-07-07 14:03:11.937 VERBOSE [1] Preparing for shutdown
2008-07-07 14:03:11.953 VERBOSE [1] Exiting...

[gazoo]

I will check my logs, what is it supposed to look like?

[martint123]

That one above was from a working resume from standby. But it had to shutdown and restart pvrx2 - I don't know if this is normal or not - at least it ends up working.

[gazoo]

I rebooted on a separate issue, and now it's working fine :confused: I'll post back when it acts up again.

[martint123]

I rebooted on a separate issue.

Ah yes, I find that I have to reboot every few weeks or so, otherwise it doesn't go to sleep.

Strange - when I use to work with Novell and Unix some of the servers had been up and running for many years without needing a reboot. :confused:

[gazoo]

Did it again, just went to desktop. Found this in logs:
2008-07-07 21:18:51.015 VERBOSE [1] System is going to low power state...

2008-07-10 19:53:22.531 VERBOSE [1] flushDatabaseConnections()
2008-07-10 19:53:22.562 VERBOSE [12] RecordingFactory.loadSchedule()
2008-07-10 19:53:22.562 VERBOSE [12] getValue cached value: /settings/AutoRemoveMissingRecordings : false
2008-07-10 19:53:22.796 VERBOSE [13] RecordingFactory.loadSchedule()
2008-07-10 19:53:22.796 VERBOSE [13] getValue cached value: /settings/AutoRemoveMissingRecordings : false
2008-07-10 19:53:22.796 VERBOSE [10] TV Guide data stale. Forcing reload.(with short delay)
2008-07-10 19:53:30.234 VERBOSE [1] getValue() loading new key/value into cache: /settings/ScreenSaverMoveFrequency
2008-07-10 19:53:30.234 VERBOSE [1] getValue: /settings/ScreenSaverMoveFrequency : 10
2008-07-10 19:53:30.234 VERBOSE [1] Skinhelper loading image from file: C:\Program Files\Devnz\GBPVR\skin2\Community3\screen saver\Logo.png
2008-07-10 19:53:30.343 VERBOSE [1] flushDatabaseConnections()
2008-07-10 19:53:30.921 VERBOSE [1] System is waking from low power state...
2008-07-10 19:53:30.921 VERBOSE [1] getValue() loading new key/value into cache: /settings/RestartAfterPowerup
2008-07-10 19:53:30.921 VERBOSE [1] getValue: /settings/RestartAfterPowerup : true
2008-07-10 19:53:30.921 VERBOSE [1] needs restart...
2008-07-10 19:53:30.921 VERBOSE [1] Dropping database connections...
2008-07-10 19:53:30.921 VERBOSE [1] flushDatabaseConnections()
2008-07-10 19:53:31.890 VERBOSE [12] Purging any stale logically deleted recordings
2008-07-10 19:53:31.906 VERBOSE [1] Doing immediate restart...
2008-07-10 19:53:31.906 VERBOSE [1] getValue() loading new key/value into cache: /settings/FSERestartDelay
2008-07-10 19:53:31.906 VERBOSE [1] getValue: /settings/FSERestartDelay : 500
2008-07-10 19:53:31.968 VERBOSE [1] NOTIFY:
type=PluginActivated
text=Default Screen Saver
2008-07-10 19:53:31.968 VERBOSE [1] NOTIFY:
type=ScreenSaverActivated
text=
2008-07-10 19:53:32.484 VERBOSE [1] Preparing for shutdown
2008-07-10 19:53:32.484 VERBOSE [1] Exiting...

Then at the end, it just shuts down for no reason.

[martint123]

Those two NOTIFY bits are additional in yours - I wonder if you have the screen saver plugin installed and if that may have an effect. If so, I'd try without it to see if it makes a difference.