v4.0.4 (170723) new NextPVR Reader/Demux component inconsitent!!

[Bobbybear]

I run NPVR on a Desktop PC that I mainly use for video editing and a PVR used for watching video and TV.
I updated both machines yesterday to v4.0.4 (170723) and find that the Desktop (Windows 10 Pro x64 v1703 build 15063.483, Intel i7-4790K with 16 GB RAM and Samsung 840 EVO 250 GB for OS, plus various HDD's for storage. 2 x TBS 6281 DVB-T2/T Tuner cards and one TBS 6891 DVB-S/S2 card) works just fine!
The new NextPVR Reader/Demux component has really reduced the time taken to lock onto a channel signal and play a TV program in about 2 seconds for the first channel then about one second when changing channels, MPEG2 Video uses Cyberlink Video/SP Decoder and H.264 Video uses Cyberlink Video Decoder (PDVD13).

But the PVR will not work with the new NextPVR Reader/Demux component!!
The PVR (Windows 10 Home x64 build 15063, AMD FX-4100 Quad-Core, 8 GB RAM, Samsung 850 EVO 250 GB for OS, plus various HDD's for storage. one Hauppauge Win-TV-Nova-TD-500 DVB-T Tuner card and one TBS 6891 DVB-S/S2 card) takes 8 or 9 seconds to log onto a live TV channel plays about half a second of picture then there is only a black screen with audio playing. I have tried this with MPEG2 Video Cyberlink Video/SP Decoder and H.264 Video Cyberlink Video Decoder (PDVD13) and also LAV Decoders for both video types nothing seems to work.
If I go back to 'Use legacy NPVR TS Reader and Microsoft Demultiplexer' then it works as normal but the time taken to pickup and play a TV signal is back to 8/9 seconds and changing channel is also very slow (probably as it was before v4.0.4.

I don't really understand why one installation works and the other does not??
It cannot be the difference in TV tuner cards make as I disabled all the cards on both machines except the TBS 6891 DVB-S/S2 cards which are both the same and I still get the same result!

Attached logs from both Desktop that works OK and PVR which fails..
Bob.

[Petrovski]

I also get the half second of picture (slightly corrupted) then blank with the new on Live TV though no delay with the channel selection/startup. (Legacy is OK)

[Petrovski]

I also get the half second of picture (slightly corrupted) then blank with the new on Live TV though no delay with the channel selection/startup. (Legacy is OK)

OK now - fixed by deselecting "Use alternate OSD with missing video"

[peter t]

Analogue I/p from Hauppauge 2210 from Satellite STB OK
Australian Digital using "Live TV"
Having problems with h264 HD Channel 80 Win and 20 ABC, Microsoft DTV-DVD Decoder (no picture or audio)
No audio on ABC 20 (h264 with mpg audio) using Cyberlink PD13 (no audio)
Freeze on channel changes. HD h264 Channel 60 Nine Network 80 Win with LAV Decoder (no picture or audio)
(Works OK with Legacy Setting)
This Machine Spec have yet to upgrade the machine shown in my signature
Intel I7 4790K Asrock Extreme 6, 16G, W7Sp1, NvidiaGT660 2XHauppauge 2210

[sub]

Analogue I/p from Hauppauge 2210 from Satellite STB OK
Australian Digital using "Live TV"
Having problems with h264 HD Channel 80 Win and 20 ABC, Microsoft DTV-DVD Decoder (no picture or audio)
No audio on ABC 20 (h264 with mpg audio) using Cyberlink PD13 (no audio)
Freeze on channel changes. HD h264 Channel 60 Nine Network 80 Win with LAV Decoder (no picture or audio)
(Works OK with Legacy Setting)
This Machine Spec have yet to upgrade the machine shown in my signature
Intel I7 4790K Asrock Extreme 6, 16G, W7Sp1, NvidiaGT660 2XHauppauge 2210

Do you see the same issues playing recordings from those channels? If so, it'd be good if you can supply a sample recording so I can try reproducing it here.

[peter t]

I will make short recordings on these channels and check replay if I find a problem, how long a recording do you want and where do I post them?

[sub]

I will make short recordings on these channels and check replay if I find a problem, how long a recording do you want and where do I post them?

At least a couple of minutes will be good.
Post them somewhere like dropbox or one drive, and just PM me the download link.

[peter t]

Made recordings on three h264 HD channels, they replay ok but lots of problems with Live TV. Do you want me to edit up a couple of minutes of video for each channel. (no drama quite happy to do it)

[Bobbybear]

Thanks Petrovski
I deselected "Use alternate OSD with missing video" and now PVR picture works OK.
Still slow to lock onto a signal and change channels compared to the PC but maybe that's just the Hauppauge PCIe card.
Maybe I will upgrade it to a TBS!
Bob