SAT>IP Cannot receive HD Channels

[sub]

Sub: In your quotes, the "pids=" part at the end your Scanning and Recording examples are different. (Scanning: "&pids=0,16,17,18", Recording: "&pids=0,18"

Yeah, this difference is fine. These extra pids are only required at scanning time, not during recording/live tv.

[Beamer]

I suspect it is not needed but feel free to let me know if you would like me to post a screen shot of BBC One HD parameters running from my Android App on the TSS400.

[Beamer]

Sub: Have you been able to reproduce this problem?

[sub]

No. DVB-S2 tuning is working fine for me here. I'm not really sure what to suggest on this one.

[Beamer]

I'm guessing that you are not using a Triax - TSS 400 SAT>IP server?

[sub]

No - I've got a Telestar Digitbit R1.

[Beamer]

Sub: Here is a diag screen capture of BBC One HD playing via Tivizen an Android App. Is it possible that the TSS 400 needs more information when operating in S2 mode than the Npvr program is supplying, perhaps more PID's?

I can watch any program on Npvr so long as it is not DVB-S2. Like you mentioned earlier, if it can be tuned it must be able to be received.

Do you have any software tools that would enable me to capture and compare command lines received by the TSS 400?

[sub]

Today isn't the best day to ask me. It's my first day back at my day job after Christmas/NewYear break, so pretty busy catching up on stuff.

For the most part, it should just come down to those tuning strings I extracted from the logs earlier. As mentioned if it's managing to tune it during scanning, it should be able to tune it later.

2015-12-26 13:05:48.150 [DEBUG][6] SAT>IP uri: src=1&freq=10847&sr=23000&pol=v&msys=dvbs2&mtype=8 psk&rolloff=0.35&pilot=on&fec=23&pids=0,18

The only difference seemed to be those couple of PIDs. They shoudn't be required though. I could probably give you temporary patch that adds these, the same as at scanning time, to see if it makes any difference.

[Beamer]

I really have no idea if this is useful in getting to the root of the problem, I have attached the tuning parameters generated by DVB viewer Lite on my PC. Its interesting to note that the PC program V the Android program have a bunch of different PID's for the same station!

Aside from the PID's, Npvr does not appear to be getting any tuning information to the TSS 400. Is this to be expected if the PID's is an issue?

No worries on timing, I appreciate this has to be treated as a background task

[KayDiefenthal]

i had Telestar Digibit R1 ,Triax Tss 400 and Digital Devices OctopusNet and all working fine fir NextPvr
the one and only Problem that i know is the cseq in the rtsp part