NMT Testing

[jksmurf]

Restart with the original files and edit with wordpad instead of notepad. It could be the a problem with the text file itself, *nix's don't like cr/lf.

Martin

It was getting on for 2am so I gave up. I did reboot too. Will try a different USB Stick later perhaps....

k.

[mvallevand]

You should be able to

Setup
Network Share
browse
Workgroup
Your server name
and select mvpmc

Martin

[jksmurf]

Sorry fellers, bad USB Stick ... I should have know better. I now get the telnet message, and when I use putty on Port 23 using Telnet I get Busybox 1.5.0 blah blah, then / #.

Now I need some hand-holding ... Presumably I leave the white Telnet screen up on the PH?

It doesn't seem to have cat as a built-in command

• when I type cat <enter> it just drops down a line.
  
• when I type cat /tmp/settings.txt <enter>, initially it just repeated cat /tmp/settings.txt back at me. The second time I got the stuff below, "No such ...."
  
• Are you supposed to log in like the mvmpc Putty sessions?

Code:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.03.01 15:06:58 =~=~=~=~=~=~=~=~=~=~=~=
BusyBox v1.5.0 (2008-01-18 11:52:19 MYT) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
/ # cat /tmp/current_tv
0/ # current      at /tmp/tvmode
0
/ # cat /tmp/settings.txt
cat: /tmp/settings.txt: No such file or directory
/ #
cat /tmp/tvmode

Also as a heads up my preference will be to run the emulation mode client from a share and not from the usb stick ...... I actually want you to map to the mvpmc share with NMT software if you can.

Does this mean putting lundman's files in my mvpmc share instead of the USB?

k.

[jksmurf]

I had a little more success when I cd'd into tmp FIRST, then issues cat settings.txt. Dunno why it didn't work from cat /tmp/settings.txt :confused:

Anyway, list below. Not too worried about passwords atm, all 1234 .. :-)

Anyway, some success... sorry I don't know how to issue these telnet/*nix commands with confidence, but I'm happy to be led by the nose... btw, running SD PAL analog.

k.

Code:

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2008.03.01 15:21:07 =~=~=~=~=~=~=~=~=~=~=~=

BusyBox v1.5.0 (2008-01-18 11:52:19 MYT) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
/ # [Jcd /tmp
/tmp # cat setting.txt
vop_mode=480i
tv_out=analog
HDMI_to_DVI=off
eth_dns=208.67.222.222
eth_dns2=208.67.220.220
wlan_ssid=-
wlan_channel=0
wlan_connection=infrastructure
wlan_security=securitynone
wlan_securitykey=-
hostname=PCH-A100
workgroup=WORKGROUP
upnp=1
ihome=1
ftpserv=1
smbserv=1
nfsserv=1
btpdserv=1
password=1234
BTPD_PORT=8881
BTPD_BWIN=0
BTPD_BWOUT=0
BTPD_MAXPEER=0
level=000
dvd_autoplay=0
dvd_audio=1
dvd_subtitle=0
tv_type=3
dvd_password=1234
dst=off
volume=0
link1=smb://SMURFPC/GBPVRVids
link2=smb://THESLUG/DISK 1
link3=smb://THESLUG/DISK 2
link4=smb://SMURFPC/ArchivedMovies3
lang=english_lang
subtitle=none
aspect=2
playmode=none
photo_transition=fade_in
photo_interval=6
screensaver=s15
dhcp=1
wireless=0
time_zone=+08:00
time_server=stdtime.gov.hk
daylight_sav=off
sayatv_port=19000
video_output=0
HDMI_mute=off
vga_mode=off
audio_chan=stereo
audio_dts=raw
audio_ac3=pcm
audio_aac=pcm
audio_wma=pcm
eth_gateway=192.168.1.1
eth_ipaddr=192.168.1.201
eth_netmask=255.255.255.0 /tmp # cat u currwent    ent_tv
0/tmp # cat tvmode
0
/tmp # cat /tmp/current_tv
0/tmp # ~ cat /tmp/tvmode
0
/tmp #

[jksmurf]

You should be able to

Setup
Network Share
browse
Workgroup
Your server name
and select mvpmc

Martin

OK, done that. Took all of 2 secs. Already shared from my mvpmc sessions. So what do I stick IN that dir... you have a dongle :-) ? Or do I stick all those files from lundman in there instead of using the USB stick?

k.

[Sheik Yerbouti]

OK, done that. Took all of 2 secs.

I'm having difficulties with this. When I choose "Browse" I get the message "No workgroup found". In Vista the firewall is disabled and the name of the workgroup is "WORKGROUP". Networkdetection is on. I'm beginning to feel like a newbe :o

[mvallevand]

k, that's good and bad it confirmed that with tvmode 0 (auto) set I can't tell what video standard to use. Could you now send your settings.txt with the mvpmc share added?

Chris, Do you have the computer browser service turned on?

Martin

[jksmurf]

k, that's good and bad it confirmed that with tvmode 0 (auto) set I can't tell what video standard to use. Could you now send your settings.txt with the mvpmc share added?

Martin

I guess it's link5=smb://SMURFPC/mvpmc ?

k.

Code:

BusyBox v1.5.0 (2008-01-18 11:52:19 MYT) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
/ #
/ # d   
/ # cd /tmp
/tmp # cat setting.txt
vop_mode=480i
tv_out=analog
HDMI_to_DVI=off
eth_dns=208.67.222.222
eth_dns2=208.67.220.220
wlan_ssid=-
wlan_channel=0
wlan_connection=infrastructure
wlan_security=securitynone
wlan_securitykey=-
hostname=PCH-A100
workgroup=WORKGROUP
upnp=1
ihome=1
ftpserv=1
smbserv=1
nfsserv=1
btpdserv=1
password=1234
BTPD_PORT=8881
BTPD_BWIN=0
BTPD_BWOUT=0
BTPD_MAXPEER=0
level=000
dvd_autoplay=0
dvd_audio=1
dvd_subtitle=0
tv_type=3
dvd_password=1234
dst=off
volume=0
link1=smb://SMURFPC/GBPVRVids
link2=smb://THESLUG/DISK 1
link3=smb://THESLUG/DISK 2
link4=smb://SMURFPC/ArchivedMovies3
lang=english_lang
subtitle=none
aspect=2
playmode=none
photo_transition=fade_in
photo_interval=6
screensaver=s15
dhcp=1
wireless=0
time_zone=+08:00
time_server=stdtime.gov.hk
daylight_sav=off
sayatv_port=19000
video_output=0
HDMI_mute=off
vga_mode=off
audio_chan=stereo
audio_dts=raw
audio_ac3=pcm
audio_aac=pcm
audio_wma=pcm
link5=smb://SMURFPC/mvpmc
eth_gateway=192.168.1.1
eth_ipaddr=192.168.1.201
eth_netmask=255.255.255.0 /tmp #

[mvallevand]

Thats perfect.

Now copy busybox26 telnet.html and script.cgi into the mvpmc share. Eventually script.cgi will do what dongle.bin.config is doing today and load the gbpvr client

edit telnet.html to look like

<a href="http://localhost.drives:8883/[SMB]%20SMURFPC:mvpmc/script.cgi">Telnetd</a>

and edit script.cgi to look like the following, use your ip instead of xx.xx.xx.xx

#!/bin/sh

echo "Content-Length: 29";
echo "Content-type: text/html";
echo "";

cd ~
mkdir /etc/mvpmc
mount -t cifs //xx.xx.xx.xx/mvpmc /etc/mvpmc/ -o username=guest,ro
ln -s /etc/mvpmc/busybox26 /usr/bin/telnetd
telnetd -l /bin/sh -p 23 &
echo "Telnetd started on port 23";
exit 0;

Martin

[Sheik Yerbouti]

I'm having difficulties with this. When I choose "Browse" I get the message "No workgroup found".

Yes! I've got it. I returned to my fresh Vista image without the Hanewin software and now I've got my mvpmc share on the PCH. I'll follow the instructions you (Martin) gave to jksmurf.