"The tuner being used for LiveTV is no longer available"

johnsonx42 · 2010-08-20, 02:59 AM

no improvement to my situation, thanks for the try though. The recording that started at 18:30 killed LiveTV, and was supposed to end at 19:00 but is still running. I restarted Live TV at 18:44, I can see the new logging from the patch.

Code:
2010-08-19 18:29:41.972    [DEBUG][5]    Renew lease ok (0x5F20001)

2010-08-19 18:29:52.041    [DEBUG][5]    Renew lease ok (0x5F20001)

2010-08-19 18:30:00.043    [DEBUG][6]    Scheduled recording is supposed to start on tuner currently being used for live tv. Need to look for alternative tuner.

2010-08-19 18:30:00.052    [DEBUG][6]    Found alternative tuner.

2010-08-19 18:30:00.052    [DEBUG][6]    Moving from: Hauppauge WinTV 885 BDA Tuner/Demod     (ATSC)

2010-08-19 18:30:00.052    [DEBUG][6]    Moving to: WinTV HVR-950 BDA Tuner     (ATSC)

2010-08-19 18:30:00.185    [DEBUG][6]    About to start recording (4867): F:\Recordings\Who Wants to Be a Millionaire\Who Wants to Be a Millionaire_20100819_18301900.ts

2010-08-19 18:30:00.185    [INFO][6]    DigitalRecorder.StartStream(F:\Recordings\Who Wants to Be a Millionaire\Who Wants to Be a Millionaire_20100819_18301900.ts)

2010-08-19 18:30:00.212    [DEBUG][6]    Switching BDA graph to tune: 

<tuning>

  <type>ATSC</type>

  <locator>

    <physical_channel>9</physical_channel>

  </locator>

  <service_id>1</service_id>

  <tsid>297</tsid>

  <service_type>1</service_type>

</tuning>

2010-08-19 18:30:01.588    [DEBUG][6]    locked=1, present=1, strength=-2000, quality=84   (took 16ms to check)

2010-08-19 18:30:01.590    [INFO][6]    DigitalRecorder.StartStream() allocated handle: 0x2

2010-08-19 18:30:01.609    [DEBUG][6]    Temp at 8/19/2010 6:30:11 PM

2010-08-19 18:30:01.609    [DEBUG][6]    Started recording (4867:F:\Recordings\Who Wants to Be a Millionaire\Who Wants to Be a Millionaire_20100819_18301900.ts)

2010-08-19 18:30:01.754    [DEBUG][6]    No C:\Users\Public\NPVR\Scripts\ParallelProcessing.bat

2010-08-19 18:30:02.104    [DEBUG][5]    Renew lease failed (0x5F20001)

2010-08-19 18:30:02.104    [DEBUG][5]    liveHandleRenewalTime contains 1 handles:

2010-08-19 18:30:02.105    [DEBUG][5]     - 0x5F20001

2010-08-19 18:30:02.647    [INFO][3]    DigitalRecorder.StopStream() handle: 1

2010-08-19 18:44:16.623    [DEBUG][13]    StartStream(6939:KTTV DT)

2010-08-19 18:44:16.623    [DEBUG][13]    looking for capture source

2010-08-19 18:44:16.623    [DEBUG][13]    checking: Hauppauge WinTV 885 Video Capture

2010-08-19 18:44:16.623    [DEBUG][13]    enabled and present

2010-08-19 18:44:16.623    [DEBUG][13]    does not have channel

2010-08-19 18:44:16.623    [DEBUG][13]    checking: WinTV HVR-950 Capture

2010-08-19 18:44:16.623    [DEBUG][13]    enabled and present

2010-08-19 18:44:16.623    [DEBUG][13]    does not have channel

2010-08-19 18:44:16.623    [DEBUG][13]    checking: Hauppauge WinTV 885 BDA Tuner/Demod     (ATSC)

2010-08-19 18:44:16.623    [DEBUG][13]    enabled and present

2010-08-19 18:44:16.623    [DEBUG][13]    has channel

2010-08-19 18:44:16.623    [DEBUG][13]    live tv is not possible

2010-08-19 18:44:16.623    [DEBUG][13]    checking: WinTV HVR-950 BDA Tuner     (ATSC)

2010-08-19 18:44:16.623    [DEBUG][13]    enabled and present

2010-08-19 18:44:16.623    [DEBUG][13]    has channel

2010-08-19 18:44:16.623    [DEBUG][13]    live tv is possible

2010-08-19 18:44:16.623    [INFO][13]    DigitalRecorder.StartStream(LIVE&F:\live-KTTV DT-2426.ts)

2010-08-19 18:44:16.623    [INFO][13]    Creating BDA graph

2010-08-19 18:44:16.630    [DEBUG][13]    Using tuner WinTV HVR-950 BDA Tuner (1)

2010-08-19 18:44:16.638    [DEBUG][13]    About to auto detect capture filter

2010-08-19 18:44:16.646    [DEBUG][13]    Got capture filter.

2010-08-19 18:44:16.646    [DEBUG][13]    Added capture filter

2010-08-19 18:44:16.646    [DEBUG][13]    Connected Tuner to Capture

2010-08-19 18:44:16.662    [DEBUG][13]    Graph filter list:

2010-08-19 18:44:16.662    [DEBUG][13]     - BDA MPEG2 Transport Information Filter

2010-08-19 18:44:16.662    [DEBUG][13]     - MPEG-2 Demultiplexer

2010-08-19 18:44:16.662    [DEBUG][13]     - NPVR TS Mon

2010-08-19 18:44:16.662    [DEBUG][13]     - Capture

2010-08-19 18:44:16.662    [DEBUG][13]     - Tuner

2010-08-19 18:44:16.662    [DEBUG][13]     - Network Provider

2010-08-19 18:44:16.662    [INFO][13]    About to start BDA graph

2010-08-19 18:44:16.662    [DEBUG][13]    Starting graph...

2010-08-19 18:44:20.341    [DEBUG][13]    About to tune BDA graph: 

<tuning>

  <type>ATSC</type>

  <locator>

    <physical_channel>11</physical_channel>

  </locator>

  <service_id>3</service_id>

  <tsid>299</tsid>

  <service_type>1</service_type>

</tuning>

2010-08-19 18:44:20.662    [DEBUG][13]    locked=1, present=1, strength=-27, quality=79   (took 78ms to check)

2010-08-19 18:44:20.677    [INFO][13]    DigitalRecorder.StartStream() allocated handle: 0x3

2010-08-19 18:44:20.677    [DEBUG][13]    Live TV handle: 0x5F40003

2010-08-19 18:44:30.759    [DEBUG][5]    Renew lease ok (0x5F40003)

2010-08-19 18:44:40.817    [DEBUG][5]    Renew lease ok (0x5F40003)

I hope the patched helped Martin's situation with analog...

***sub*** · 2010-08-20, 03:14 AM

Quote:2010-08-19 18:30:00.043 [DEBUG][6] Scheduled recording is supposed to start on tuner currently being used for live tv. Need to look for alternative tuner.

Yeah, I suspect this is something else. Thanks for checking though.

mvallevand · 2010-08-20, 03:21 AM

johnsonx42 Wrote:I hope the patched helped Martin's situation with analog...

Partly. It fixed 4 similar and repeatable use cases but there are still issues. I now have problems when NextPVR hangs when the graph stops, and it is not restricted to analog.

Martin

johnsonx42 · 2010-08-24, 06:50 PM

sub, any progress on this issue as logged in post 41 (and first reported in post 14)? I wouldn't bug you for anything less than an every-day headache, which this is. The problem is not so much the part where LiveTV dies when a recording starts, that's mere inconvenience. But the recording that starts in that situation then runs on forever, and I have to reboot the machine to stop it. Presumably fixing the first part would resolve the second.

***sub*** · 2010-08-24, 08:08 PM

johnsonx42 Wrote:sub, any progress on this issue as logged in post 41 (and first reported in post 14)? I wouldn't bug you for anything less than an every-day headache, which this is. The problem is not so much the part where LiveTV dies when a recording starts, that's mere inconvenience. But the recording that starts in that situation then runs on forever, and I have to reboot the machine to stop it. Presumably fixing the first part would resolve the second.

I just took a look now. I havnt really tested it, but give this patch a go. Hopefully it'll address that specific scenario around moving a recording to an alternative tuner when live tv is in use.

johnsonx42 · 2010-08-24, 09:09 PM

Success!

Code:
2010-08-24 13:59:29.276    [DEBUG][15]    Renew lease ok (0x5F20001)

2010-08-24 13:59:39.373    [DEBUG][16]    Renew lease ok (0x5F20001)

2010-08-24 13:59:49.503    [DEBUG][3]    Renew lease ok (0x5F20001)

2010-08-24 13:59:59.562    [DEBUG][14]    Renew lease ok (0x5F20001)

2010-08-24 14:00:00.352    [DEBUG][6]    Scheduled recording is supposed to start on tuner currently being used for live tv. Need to look for alternative tuner.

2010-08-24 14:00:00.360    [DEBUG][6]    Found alternative tuner.

2010-08-24 14:00:00.360    [DEBUG][6]    Moving from: Hauppauge WinTV 885 BDA Tuner/Demod     (ATSC)

2010-08-24 14:00:00.360    [DEBUG][6]    Moving to: WinTV HVR-950 BDA Tuner     (ATSC)

2010-08-24 14:00:00.439    [DEBUG][6]    About to start recording (5495): F:\Recordings\All in the Family\All in the Family_20100824_14001430.ts

2010-08-24 14:00:00.439    [INFO][6]    DigitalRecorder.StartStream(F:\Recordings\All in the Family\All in the Family_20100824_14001430.ts)

2010-08-24 14:00:00.439    [INFO][6]    Creating BDA graph

2010-08-24 14:00:00.447    [DEBUG][6]    Using tuner WinTV HVR-950 BDA Tuner (1)

2010-08-24 14:00:00.459    [DEBUG][6]    About to auto detect capture filter

2010-08-24 14:00:00.466    [DEBUG][6]    Got capture filter.

2010-08-24 14:00:00.469    [DEBUG][6]    Added capture filter

2010-08-24 14:00:00.472    [DEBUG][6]    Connected Tuner to Capture

2010-08-24 14:00:00.489    [DEBUG][6]    Graph filter list:

2010-08-24 14:00:00.489    [DEBUG][6]     - BDA MPEG2 Transport Information Filter

2010-08-24 14:00:00.489    [DEBUG][6]     - MPEG-2 Demultiplexer

2010-08-24 14:00:00.489    [DEBUG][6]     - NPVR TS Mon

2010-08-24 14:00:00.489    [DEBUG][6]     - Capture

2010-08-24 14:00:00.489    [DEBUG][6]     - Tuner

2010-08-24 14:00:00.489    [DEBUG][6]     - Network Provider

2010-08-24 14:00:00.490    [INFO][6]    About to start BDA graph

2010-08-24 14:00:00.490    [DEBUG][6]    Starting graph...

2010-08-24 14:00:04.192    [DEBUG][6]    About to tune BDA graph: 

<tuning>

  <type>ATSC</type>

  <locator>

    <physical_channel>32</physical_channel>

  </locator>

  <service_id>2</service_id>

  <tsid>231</tsid>

  <service_type>1</service_type>

</tuning>

2010-08-24 14:00:04.556    [DEBUG][6]    locked=1, present=1, strength=-22, quality=10   (took 63ms to check)

2010-08-24 14:00:04.557    [INFO][6]    DigitalRecorder.StartStream() allocated handle: 0x2

2010-08-24 14:00:04.558    [DEBUG][6]    Temp at 8/24/2010 2:00:14 PM

2010-08-24 14:00:04.558    [DEBUG][6]    Started recording (5495:F:\Recordings\All in the Family\All in the Family_20100824_14001430.ts)

2010-08-24 14:00:04.651    [DEBUG][6]    No C:\Users\Public\NPVR\Scripts\ParallelProcessing.bat

2010-08-24 14:00:09.626    [DEBUG][14]    Renew lease ok (0x5F20001)

2010-08-24 14:00:19.691    [DEBUG][14]    Renew lease ok (0x5F20001)

2010-08-24 14:00:29.753    [DEBUG][14]    Renew lease ok (0x5F20001)

Thanks sub!

***sub*** · 2010-08-24, 09:10 PM

Great.

johnsonx42 · 2010-08-24, 10:01 PM

And a quick followup, as expected the recording that started at 2:00pm stopped on time at 2:30pm.

This bug seems completely squashed.

mikenl · 2010-09-28, 09:41 PM

After a fresh windows 7 X86 Ultimate install i'm seeing this error. Npvr Ver. 1.5.31
Sometimes i can zap once, most of the times none, resulting in the error.
The logs show a signal quality of 25 ? maybe that is related ?
I have progdvb installed, wich works correct for all channels, when i scan a transponder there i see for 1/4 of a second signal quality 25% after that it jumps to 100%
Logs are attached.

Thanks,
Mike

johnsonx42 · 2010-09-29, 12:49 AM

Certainly a completely different cause for the error than the other issues in this thread... it looks like the first stream died for some reason after about 20 seconds, so it started a new stream, but then NextPVR didn't try to renew the new handle for an entire minute by which time NRecord had already expired the handle. At first I thought when it went from handle 140001 to 140002 it was a channel change, but then I realized both were on the same channel. Way above my pay grade, only sub knows the answer to this one.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Unable to access tuner after hibernation	bm_00	1	917	2022-12-12, 02:00 PM Last Post: mvallevand
	Tuner not being released when live TV stopped on Kodi	dark_half	7	2,389	2022-06-12, 11:59 PM Last Post: sub
	NPVR 4.2.4 Video Library No Longer Shows folder.jpg	Lao Pan	12	3,290	2022-04-14, 04:33 AM Last Post: Antmannz
	Can't find tuner filter in NPVR 4.05 on old XP machine (eee 701) with RTL2832U	iamanotheruser	3	1,413	2022-01-03, 04:45 AM Last Post: mvallevand
	ZAP2XML no longer loading TV Guide Schedule	skoonz_sr@hotmail.com	33	16,876	2021-03-27, 06:45 AM Last Post: Jean0987654321
	Problem locking on to a tuner?	time_lord	7	2,474	2021-01-09, 12:06 PM Last Post: Graham
	adding a removed tuner?	bisonfan	1	1,326	2020-09-12, 03:49 AM Last Post: sub
	Analogue Tuner and Input	shspvr	1	1,290	2020-01-27, 06:53 PM Last Post: sub
	QAM tuner - issue when local feed switches to national	ElihuRozen	9	3,038	2019-11-18, 03:16 AM Last Post: mvallevand
	Recent problem with Hauppauge WinTV-dual HD TV Tuner	Christen	2	3,977	2019-10-12, 02:05 PM Last Post: Christen