v0.94.8 (afternoon)

[sub]

If you have a PostProcessing.bat, it'll be run instead of Comskip.exe or SA.

[capone]

Ok...just a cpl of posts below, it looked like you were saying both would run, but it would just screw things up if you had things in postproc that relied on CS/SA running first (as CS/SA may not be done when it runs).

[nkh]

Yeah, I now know that this fix wouldnt have helped.

I've talked to Hauppauge about this. It seems their device drivers will always indicate there is no signal present for certain models of tuner. GB-PVR's scanning will magically start working on those devices in the future if Hauppauge ever fix this problem. I wouldnt hold my breath...

Ahh, okay, thanks for the explanation

I have found another problem though.. the video stutters when I'm playing it back in VMR9/7, I can only get stutter-free video if I use overlay (it's the same no matter what codec I choose). I haven't changed any settings since the last release, so I'm wondering if there's some new settings I can change or if my 1ghz VIA C3 is finaly getting too slow? (btw, it's mpeg2 recorded with a pvr-350, and I'm using the tv-out on my via m10000 motherboard).

[sub]

I have found another problem though.. the video stutters when I'm playing it back in VMR9/7, I can only get stutter-free video if I use overlay (it's the same no matter what codec I choose).

Nothing has changed in the video playback code in this release. Maybe you're using a different video decoder or something similiar?

[CPVR]

I can't get this version to work - when I click on Map EPG settings I get a browser box asking me to locate the config files - when I click the box to choose a directory it says not responding. Using Compro T200. By the way with previous versions I have got this to tune but had to set it to T300 and not T200. If I click on update EPG a box flashes up quickly saying please wait updating EPG and then goes off and nothing happens. This version is unusable for me.

[sub]

when I click on Map EPG settings I get a browser box asking me to locate the config files - when I click the box to choose a directory it says not responding.

This window is generated by the ShowShifter mux. Try switching to a different mux. Alternatively use the forum "search" feature. I think another user gave a description of how to stop the mux doing this.

[CPVR]

If you mean the BDA Mux on the Misc page It was set to the MS one - I still get the file window whatever I choose. Last version I tried was GBPVR09310.msi and didn't have this problem.

[nkh]

Nothing has changed in the video playback code in this release. Maybe you're using a different video decoder or something similiar?

Okay, thanks, I only have 3 mpeg2 decoders installed, so I'll try to play around with them some more. I have ffdshow installed, but I have never had it enabled in GBPVR 'cos I assumed it would use more processing power, could that have anything to do with this? (though it's most likely something that's changed in my setup during the install.. hmm.. )

[sub]

Can you play a file then post your gbpvr.exe-native.log? This will tell use what filters are bing used on your machine. ffdshow can be very insistent some times.

[nkh]

Can you play a file then post your gbpvr.exe-native.log? This will tell use what filters are bing used on your machine. ffdshow can be very insistent some times.

Sure, thanks for looking into this

Code:

23:53:33.972    INFO    Log started
23:53:33.972    VERBOSE    getSetting(ShowClosedCaptions)
23:53:34.002    VERBOSE    getSetting(UseFFDSHOW)
23:53:34.002    VERBOSE    getSetting(EnableTeleText)
23:53:34.002    VERBOSE    TeleText enabled
23:53:34.002    VERBOSE    getSetting(HorizontalZoom)
23:53:34.012    VERBOSE    Horizontal Zoom: 1.000000
23:53:34.012    VERBOSE    getSetting(VerticalZoom)
23:53:34.012    VERBOSE    Vertical Zoom: 1.000000
23:53:34.012    VERBOSE    getSetting(HorizontalOffset)
23:53:34.012    VERBOSE    Horizontal Offset: 0
23:53:34.012    VERBOSE    getSetting(VerticalOffset)
23:53:34.012    VERBOSE    Vertical Offset: 0
23:53:34.012    VERBOSE    getSetting(LiveTVPrePlayDelay)
23:53:34.012    VERBOSE    getSetting(OSDTransparency)
23:53:34.012    VERBOSE    getSetting(AspectRatio0)
23:53:34.082    VERBOSE    getSetting(AspectRatio1)
23:53:34.092    VERBOSE    getSetting(AspectRatio2)
23:53:34.092    VERBOSE    getSetting(AspectRatio3)
23:53:34.092    VERBOSE    getSetting(AspectRatio4)
23:53:34.092    VERBOSE    getSetting(AspectRatio5)
23:53:34.092    VERBOSE    getSetting(AspectRatio6)
23:53:34.092    VERBOSE    getSetting(AspectRatio7)
23:53:34.092    VERBOSE    getSetting(AspectRatio8)
23:53:34.092    VERBOSE    getSetting(TeletextRect)
23:53:34.092    VERBOSE    MinimumFilePlaySize=200000
23:53:34.202    VERBOSE    DirectShowPlayerVMR9() initialising...
23:53:34.202    VERBOSE    getSetting(OSDTransparency)
23:54:43.421    INFO    DirectShowPlayerBase::playVideoFile(E:\Pvr\Simpsons\Simpsons_20050914_19001930.mpg)
23:54:43.441    VERBOSE    Creating new graph
23:54:43.451    VERBOSE    getSetting(PreferredAudioRenderer)
23:54:43.842    VERBOSE    audio renderer filter: DirectSound: VIA AC'97 Audio (WAVE)
23:54:43.972    VERBOSE    getSetting(PreferredAudioDecoder)
23:54:43.972    VERBOSE    getSetting(PreferredDecoder)
23:54:44.182    VERBOSE    video decoder filter: InterVideo NonCSS Video Decoder for Hauppauge
23:54:45.294    VERBOSE    getSetting(ListGraphFilters)
23:54:45.294    VERBOSE    Graph contains the following filters:
23:54:45.294    VERBOSE     - Video Renderer
23:54:45.294    VERBOSE     - DirectSound: VIA AC'97 Audio (WAVE)
23:54:45.294    VERBOSE     - MainConcept MPEG Audio Decoder
23:54:45.294    VERBOSE     - InterVideo NonCSS Video Decoder for Hauppauge
23:54:45.294    VERBOSE     - MPEG-2 Demultiplexer
23:54:45.294    VERBOSE     - E:\Pvr\Simpsons\Simpsons_20050914_19001930.mpg
23:54:45.294    VERBOSE    getSetting(SaveGraphFiles)
23:54:45.374    INFO    DirectShowPlayerBase::playFile() done
23:54:45.394    VERBOSE    DirectShowPlayerBase::setPlaybackRate(1.000000)
23:54:45.394    VERBOSE    Restoring audio