Diamond PVR560

[sub]

There is a filter check you utility that lists the names of all appropriate analog filters found on your machine, and there associated pin names: http://forums.gbpvr.com/showpost.php?p=6...stcount=33

[zanehuck]

Surely that doesnt work!?

I'm watching TV in GB right now.

I'll take a look at the filter check and try to build a complete definition.

[zanehuck]

it could if all the pins for this device were the same as the defaults (which were based on PVR250 names).

I ran filter check. Turns out the filter names are an exact match to the PVR250. Here is my updated ini settings. Feel free to include this in the program. Everything seems to be working properally.

Code:

[Conexant Falcon]
INIT_MODE=DEFAULT
INIT_MSP=0
SUPPORTS_FM_RADIO=1
BLACKBIRD=1
CONEXANT=1
FILTER_CROSSBAR=Conexant Falcon Crossbar
FILTER_CAPTURE=Conexant Falcon Video Capture
FILTER_TV_TUNER=Conexant Falcon Tuner
FILTER_TV_AUDIO=Conexant Falcon TvAudio
FILTER_ENCODER=Conexant Falcon Encoder
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Capture

The only thing I'm unsure about is the Blackbird option. I don't know what this does -- it was in the one I copied as a starting point.

[sub]

This setting specifies if it as a separate encoder filter or not. If it does, then it should be BLACKBIRD=1, which I think is right for this device.

Cheers, I'll include the definition in the master file.

[zanehuck]

Yes, there is a seperate Encoder filter.

[zanehuck]

In the Crossbar filter there's also "Video Composite In", "Video SVideo In", and "Audio Line In". I'm not sure if any of those are useful to you.