1600 difference

Smoker · 2007-06-01, 05:23 PM

Greetings

Looking at the Hauppauge 1600 models (1178 & 1101) I can't seem to determine the difference. The 1101 model has an extra coax connector (it appears).

Carlito · 2007-06-01, 06:18 PM

I think the extra connector is for FM radio?

nikolausp · 2007-06-01, 09:47 PM

Smoker Wrote:Greetings

Looking at the Hauppauge 1600 models (1178 & 1101) I can't seem to determine the difference. The 1101 model has an extra coax connector (it appears).

The difference is that the 1178 model is version V2.1 and 1101 model is only V2.0.

What this means for you, is that you want the 1178 model, because that is QAM compatible now, as you can see, here:

http://www.hauppauge.com/pages/products/...r1600.html

Hope that helps.

mvallevand · 2007-06-01, 10:38 PM

nikolausp Wrote:The difference is that the 1178 model is version V2.1 and 1101 model is only V2.0.

What this means for you, is that you want the 1178 model, because that is QAM compatible now, as you can see, here:

I'm not sure the version number is as important as the tuner model. I've got a V2.0 but my tuner is 74021 and it works with QAM. The 1101 on the web site shows tuner 74551 which doesn't support QAM.

I suppose the question becomes FM or QAM?

Martin

-Oz- · 2007-06-02, 04:03 AM

i have an FM tuner and have never used it, so go QAM

Smoker · 2007-06-02, 12:37 PM

Can someone post if there is a difference in the connectors for the cable and ATSC antenna. I am wondering if I can simply connect my cable outlet to the ATSC connector for the QAM input.

mvallevand · 2007-06-02, 12:40 PM

Smoker Wrote:Can someone post if there is a difference in the connectors for the cable and ATSC antenna. I am wondering if I can simply connect my cable outlet to the ATSC connector for the QAM input.

Thats what you have to do, the QAM is delivered by cable. I've had the opposite problem trying to connect a UHF antenna to the 75 ohm coax to see how this works with the 2 ATSC signals I am supposed to get.

Martin

Smoker · 2007-06-02, 12:56 PM

I guess to be clearer I'm wondering if the actual connectors on the card are the very same.

flyswatta · 2007-06-04, 01:55 AM

Usually cable coax and antenna coax is RG-6 or (the old stuff) RG-59 with F-type connectors. The easiest way to tell is to try to screw it on, if it works, then it's compatible.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	AMD socket FM1 & FM2 difference?	Reddwarf	9	4,574	2014-04-16, 11:08 AM Last Post: Reddwarf
	Which is better the 1600 or the 1150	divinehammer	7	2,633	2012-04-24, 03:50 PM Last Post: nitrogen_widget
	OTA ATSC tuners that work well? (HVR-1600 and 850 get horrible reception!)	sgilani	8	3,567	2012-01-19, 02:38 PM Last Post: johnnysocko
	HVR-1600 and HVR-1250	VE6CPU	4	2,593	2011-09-17, 03:51 AM Last Post: VE6CPU
	Hauppauge WinTV HVR-1600 Hybrid Capture Card Software	meccano	1	2,614	2011-08-14, 07:33 AM Last Post: Reddwarf
	Boosting performance with Hauppage HVR 1600	DavidB	6	2,400	2010-11-30, 11:13 PM Last Post: pBS
	Hauppauge 1600 Simultaneous recording	nappysolo	3	2,180	2010-09-11, 06:09 PM Last Post: sub
	Good HD Tv Card?... and not WinTV-HVR-1600	oldmanmarcin	4	2,084	2010-03-12, 06:36 AM Last Post: ForestKlown
	audio popping: Hauppauge 1600	toomanyhandles	2	1,473	2010-02-13, 01:53 AM Last Post: sub
	HVR 1600 remote sensor?	tasan	0	1,100	2010-01-01, 09:28 AM Last Post: tasan