Help setting up HVR1600

[rjaeger1]

Hi,

I just got a Hauppauge HVR1600 to replace a PVR150, which was device #3 in my system. I put the HVR1600 in the same PCI slot - would the HVR1600 also be device #3?

If I set the device as #3 and go to map channels to EPG (EPG is to be gathered from dvb data), GBPVR first tells me that the device is in use or there is a problem with the device. Then, GBPVR crashes with a .NET dialog box popping up (the one with details, continue, quit).

My system has a PVR250 as device #1, a PVR150MCE as device #2, and now a HVR1600.

I have attached my Filtercheck.log since that's what sub usually asks for.

Thanks.

[sub]

The HVR 1600 is device #1.

The PVR150 and PVR250 are device #1 and #2. I dont know which one is which though. Try them one way, and if it doesnt work, then switch them.

[rjaeger1]

Thanks sub.

Now I have those configured correctly, I am trying to scan for channels and I can't find any qam with GBPVR although I do get them in wintv. Any ideas there?

Thanks.

[sub]

Try running ReRegisterFilters.bat. If that doesnt help, then try doing a scan, then zip and attach the config.exe.log and config.exe-native.log files.

[rjaeger1]

Hi Sub,

Here are the logs you asked for after scanning:

config.exe-native:
2008-10-17 09:35:35.625 INFO Log started
2008-10-17 09:35:35.625 VERBOSE getSetting(LoggingLevel)
2008-10-17 09:35:35.640 VERBOSE getSetting(LoggingLevel)
2008-10-17 09:35:35.640 VERBOSE getSetting(LoggingLevel)
2008-10-17 09:35:35.640 INFO Logging Level is Error

config.exe.log:
2008-10-17 09:35:33.953 VERBOSE [1] installDirectory is E:\Program Files\Devnz\GBPVR\
2008-10-17 09:35:33.953 VERBOSE [1] configurationFile is config.xml
2008-10-17 09:35:33.953 VERBOSE [1] getValue() loading new key/value into cache: /settings/DatabaseConnectionString
2008-10-17 09:35:33.953 VERBOSE [1] getValue: /settings/DatabaseConnectionString : Data Source=".\gbpvr.db3";Version=3;New=True;
2008-10-17 09:35:33.953 VERBOSE [1] getValue() loading new key/value into cache: /settings/DatabaseIdentityQuery
2008-10-17 09:35:33.953 VERBOSE [1] getValue: /settings/DatabaseIdentityQuery : select last_insert_rowid()
2008-10-17 09:35:33.953 VERBOSE [1] databaseConnectionString is Data Source="E:\Program Files\Devnz\GBPVR\gbpvr.db3";Version=3;New=True;
2008-10-17 09:35:33.953 VERBOSE [1] getValue() loading new key/value into cache: /settings/DatabaseProviderFactory
2008-10-17 09:35:33.953 VERBOSE [1] getValue: /settings/DatabaseProviderFactory : System.Data.SQLite.SQLiteFactory
2008-10-17 09:35:33.953 VERBO

Could the frequencies be incorrect in the qam.ini?

Thanks.

[sub]

Set the logging level back to 'debug'. Also make sure you have log flushing enabled. Then try doing a scan, then zip and attach the config.exe.log and config.exe-native.log files.

[rjaeger1]

Hi sub,

here are the logs (zipped and attached ). Again, thanks for your help!

[rjaeger1]

Also, I did try the patch in the survival guide for problems with digital scanning.

[rjaeger1]

Hi sub,

I removed and reinstalled all of my tuner drivers and now it works. No idea what the actual problem was but it works now.

Thanks.