sub
My apologies in advance if this looks familiar, but this is a follow on from what I was trying to do with USBUIRTSEND.exe in the GBPVR Legacy thread, but actually it applies more to NPVR because that's where I am trying to use it.
My problem is that the parameters you select for the Svideo Input of NPVR with a a PVR-150 seem to be different to GBPVR. The input I selected is from Cable and the Tuner I select is S-Video Ports.
However I can't see USBUIRTSEND.exe sending a signal to the USB-UIRT. It seems from the log below that it wants to change the Device's (PVR-150) (internal) Analog channel changer even though the SOURCE and INPUT apear to be correct (SVIDEO and CABLE resp.).
What I did was selecetd the above import the channels via an XMLTV file.
Q1. When I try to do this, I can select "SVideo" and "Cable" but what do I select for Country? I tried where I live but it fails to change channel. I tried Analog Tuner - it fails. I tried Analog Tuner RF Input. That fails, horribly.
Q2. When I look back into NPVR settings it seems to revert to "Analog" under the type for that device - I also get the fuzzy analog screen (because I do not have an Analog Antenna), and it doesn't seem to be sticky choosing SVideo and Cable?
I also got a couple of nasty errors when I chose RF (I think) esp. when I selected listen from the menu.
k.
My apologies in advance if this looks familiar, but this is a follow on from what I was trying to do with USBUIRTSEND.exe in the GBPVR Legacy thread, but actually it applies more to NPVR because that's where I am trying to use it.
My problem is that the parameters you select for the Svideo Input of NPVR with a a PVR-150 seem to be different to GBPVR. The input I selected is from Cable and the Tuner I select is S-Video Ports.
However I can't see USBUIRTSEND.exe sending a signal to the USB-UIRT. It seems from the log below that it wants to change the Device's (PVR-150) (internal) Analog channel changer even though the SOURCE and INPUT apear to be correct (SVIDEO and CABLE resp.).
What I did was selecetd the above import the channels via an XMLTV file.
Q1. When I try to do this, I can select "SVideo" and "Cable" but what do I select for Country? I tried where I live but it fails to change channel. I tried Analog Tuner - it fails. I tried Analog Tuner RF Input. That fails, horribly.
Q2. When I look back into NPVR settings it seems to revert to "Analog" under the type for that device - I also get the fuzzy analog screen (because I do not have an Analog Antenna), and it doesn't seem to be sticky choosing SVideo and Cable?
Code:
2010-08-02 23:52:10.596
[INFO][3] Running blaster: C:\Program Files\NPVR\ChanChg\USBUIRTSend.exe "C:\Program Files\NPVR\ChanChg\IRDefs\HKNowBB YX-5218A.dat" 6712010-08-02 23:52:12.358
[DEBUG][3] About to tune graph to:
<tuning>
<type>Analog</type>
<locator>
<channel>671</channel>
<country>1</country>
<input>cable</input>
<source>SVideo</source>
<fixed>2</fixed>
</locator>
</tuning>I also got a couple of nasty errors when I chose RF (I think) esp. when I selected listen from the menu.
k.
ASUS STRIX X470-F AMD 2700x 4GHz | Win10Prox64 | 32GB | NVIDIA GEforce GT1030 Fanless | WinTV DMB-TH | WinTV HVR-1280 | Hauppauge Colossus | AC86U/AC68U | USB-UIRT | RPi4 Libreelec | Sony Bravia LCD X9000F Android TV |
