Evolve mars usb

[sub]

Is NextPVR installed on your C:\ drive, or somewhere else?

[hoborg]

[ATTACH=CONFIG]31636[/ATTACH]

[hoborg]

Is NextPVR installed on your C:\ drive, or somewhere else?

No, E:\NPVR\ and E:\NPVR\data\

EDIT:
It is correctly set in registry

[hoborg]

Looks like i found the problem:
[ATTACH=CONFIG]31637[/ATTACH]

How is that possible? I installed NPVR to E:\NPVR not in to NPVR1 - how can i change it?

EDIT:
I changed it in registry key:
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\NPVR Recording Service

And it strats now. Well, that a really strange. Why it was not installed correctly durning NPVR reinstall?

[sub]

And it starts now.

Great

Well, that a really strange. Why it was not installed correctly durning NPVR reinstall?

I dont know how it could have got that "1" in there.

[hoborg]

Should not NPVR reset the patch to correct one durning NPVR install?

[hoborg]

Hi.
I just return home just to found i got 2 falied recordings: ("rec. service was not running'')
[ATTACH=CONFIG]31746[/ATTACH]


So, i checked the LOGs and i found that first recording (re-play) was recodred as it should and it is OK (???), but NPVR report "failed".

Code:

2011-09-17 13:31:46.390 [DEBUG][4] Resuming... 2011-09-17 13:31:46.625 [DEBUG][7] Recording service noted the system was resuming... 2011-09-17 13:31:46.625 [DEBUG][7] No C:\Documents and Settings\All Users\Application Data\NPVR\Scripts\Wakeup.bat 2011-09-17 13:31:47.500 [DEBUG][5] cycling MVP servers 2011-09-17 13:33:00.062 [DEBUG][7] allocating recording target filename: D:\Recordings\RE-PLAY -W\RE-PLAY -W_20110917_13351405.ts 2011-09-17 13:33:00.062 [DEBUG][7] About to start recording (1154): D:\Recordings\RE-PLAY -W\RE-PLAY -W_20110917_13351405.ts 2011-09-17 13:33:00.062 [INFO][7] DigitalRecorder.StartStream(D:\Recordings\RE-PLAY -W\RE-PLAY -W_20110917_13351405.ts) 2011-09-17 13:33:00.062 [INFO][7] Creating BDA graph 2011-09-17 13:33:00.062 [DEBUG][7] FindFilterByName failed to locate filter: Microsoft Network Provider 2011-09-17 13:33:00.062 [DEBUG][7] Using tuner Siano BDA Tuner Filter (1) 2011-09-17 13:33:00.062 [DEBUG][7] About to auto detect capture filter 2011-09-17 13:33:00.078 [DEBUG][7] Got capture filter: 'Bda Capture Filter' 2011-09-17 13:33:00.078 [DEBUG][7] Added capture filter 2011-09-17 13:33:00.078 [DEBUG][7] Connected Tuner to Capture 2011-09-17 13:33:00.093 [DEBUG][7] Graph filter list: 2011-09-17 13:33:00.093 [DEBUG][7] - MPEG-2 Sections and Tables 2011-09-17 13:33:00.093 [DEBUG][7] - BDA MPEG2 Transport Information Filter 2011-09-17 13:33:00.093 [DEBUG][7] - MPEG-2 Demultiplexer 2011-09-17 13:33:00.093 [DEBUG][7] - NPVR TS Mon 2011-09-17 13:33:00.093 [DEBUG][7] - Capture 2011-09-17 13:33:00.093 [DEBUG][7] - Tuner 2011-09-17 13:33:00.093 [DEBUG][7] - Network Provider 2011-09-17 13:33:00.093 [INFO][7] About to start BDA graph 2011-09-17 13:33:00.093 [DEBUG][7] Starting graph... 2011-09-17 13:33:00.718 [DEBUG][7] About to tune BDA graph: <tuning> <type>DVB-T</type> <locator> <frequency>490000</frequency> <bandwidth>8</bandwidth> </locator> <service_id>770</service_id> <tsid>515</tsid> <onid>8395</onid> <service_type>1</service_type> </tuning> 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@1 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@2 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@3 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@4 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@5 2011-09-17 13:33:00.718 [DEBUG][7] DigitalRecorderDVBT::Tune@6 2011-09-17 13:33:01.265 [DEBUG][7] DigitalRecorderDVBT::Tune@7 2011-09-17 13:33:01.265 [DEBUG][7] Calling LockChannel() 2011-09-17 13:33:01.281 [DEBUG][7] locked=1, present=1, strength=100, quality=100 (took 15ms to check) 2011-09-17 13:33:01.281 [DEBUG][7] DigitalRecorderDVBT::Tune@8 2011-09-17 13:33:01.281 [INFO][7] DigitalRecorder.StartStream() allocated handle: 0x2 2011-09-17 13:33:01.281 [DEBUG][7] Temp at 17.9.2011 13:33:11 2011-09-17 13:33:01.281 [DEBUG][7] Started recording (1154:D:\Recordings\RE-PLAY -W\RE-PLAY -W_20110917_13351405.ts) 2011-09-17 13:33:01.281 [DEBUG][7] No C:\Documents and Settings\All Users\Application Data\NPVR\Scripts\ParallelProcessing.bat 2011-09-17 14:09:00.078 [DEBUG][7] Stopping recording (1154). Past end time of recording. 2011-09-17 14:09:00.078 [INFO][7] DigitalRecorder.StopStream() handle: 2 2011-09-17 14:09:00.078 [INFO][7] No more streams active. Stopping device. 2011-09-17 14:09:00.078 [DEBUG][7] About to request async graph stop 2011-09-17 14:09:00.078 [DEBUG][3] About to stop network provider 2011-09-17 14:09:00.265 [DEBUG][3] Stopped network provider 2011-09-17 14:09:00.265 [DEBUG][3] Graph stopping... (async) 2011-09-17 14:09:08.078 [DEBUG][7] Async stop taking way too long 2011-09-17 14:09:08.078 [DEBUG][7] Removing filter MPEG-2 Sections and Tables 2011-09-17 14:09:08.078 [DEBUG][7] Removing filter BDA MPEG2 Transport Information Filter 2011-09-17 14:09:08.078 [DEBUG][7] Removing filter MPEG-2 Demultiplexer

But the second one is empty (nothing was recorded):

Code:

2011-09-17 17:37:46.468 [DEBUG][4] Resuming... 2011-09-17 17:37:47.500 [DEBUG][5] cycling MVP servers 2011-09-18 00:37:46.390 [DEBUG][4] Resuming... 2011-09-18 00:37:47.515 [DEBUG][5] cycling MVP servers

Acording the event wiever, rec.service was running, no errors at all.
Ideas?

[hoborg]

The exactly same problem happend again

[hoborg]

No one hit the same issue?

[sub]

No one hit the same issue?

Yes, some others have had the same too. It relates to the device not stopping when asked to. We're not sure why it can happen to a small subset of users and I've never been able to reproduce it here.

The problem used to also occurred in GBPVR, which is entirely different code, so it makes me think it's something directshow related, rather that application bug.

2011-09-17 14:09:00.265 [DEBUG][3] Graph stopping... (async)
2011-09-17 14:09:08.078 [DEBUG][7] Async stop taking way too long