Media Browser Integration

[Svekke]

I know that it acts normal with the 500. But i should give me a 500 back.
I have a card (http://www.hauppauge.tv/site/products/da...200mc.html) with 2 tuners.
So it must be possible to record 2 things on the same time....

Also when i do it directly on the nextpvr interface there is no problem and i can record 2 channels or record 1 channel and view 1 channel ...

[UncleJohnsBand]

I know that it acts normal with the 500. But i should give me a 500 back.
I have a card (http://www.hauppauge.tv/site/products/da...200mc.html) with 2 tuners.
So it must be possible to record 2 things on the same time....

Also when i do it directly on the nextpvr interface there is no problem and i can record 2 channels or record 1 channel and view 1 channel ...

Do you have both tuners defined and set to available in NPVR setup? Sounds like you may have only one card added.....

[Svekke]

Do you have both tuners defined and set to available in NPVR setup? Sounds like you may have only one card added.....

Yes they are both defined with the same set of channels. He asked to copy them on the installation. And i can record one channel and view one channel.
But he can't record 2 channels.
BTW: I wasn't viewing when i tried to record the second one.

[sub]

Can you record two recordings at the same type in NextPVR's own TV Guide screen?

[Svekke]

Yes that's possible.
See screenshot below

http://i.imgur.com/MuPymhl.png

[sub]

Sounds like NextPVR is doing it's thing correctly, but maybe the NEWA API is getting something wrong?

Can you reproduce the scheduling problem with MB, then zip and attach the web.log and nrecord.log?

[Svekke]

In attachement the requested logs

First recording at 22:18
Second recording at 22:19

[UncleJohnsBand]

In attachement the requested logs

First recording at 22:18
Second recording at 22:19

I can see the 1st recording scheduled.... but I do not see a corresponding recording event in that timeframe in the nrecord log....

Code:

2014-02-10 22:18:11.762 [INFO][14] checking for external access permission
2014-02-10 22:18:11.762 [INFO][14] externl access not allowed via NPVR Allow Remote Access API setting.
2014-02-10 22:18:11.762 [INFO][14] Using IP4 Address: 192.168.1.14
2014-02-10 22:18:11.762 [INFO][14] Valid Auto Login Network Detected
2014-02-10 22:18:11.762 [INFO][14]  
2014-02-10 22:18:11.902 [INFO][14] @@@@@
2014-02-10 22:18:11.902 [INFO][14] [COLOR=#FF0000]Found matching recording[/COLOR]
2014-02-10 22:18:11.902 [INFO][14] @@@@@

Here is the nrecord log for this timeframe...It ends (thelog with that last line)

Code:

2014-02-10 22:07:12.458 [DEBUG][9] Reloading recording schedule
2014-02-10 22:07:12.489 [DEBUG][9] CancelAllWakeupRequests
2014-02-10 22:18:11.918 [DEBUG][9] Reloading recording schedule
2014-02-10 22:18:11.918 [DEBUG][9] CancelAllWakeupRequests
2014-02-10 22:18:11.918 [DEBUG][9] Requesting wake up for 'RecordingOID867' at 10/02/2014 23:03

I do not see the recording found message for the second recording in the web log below.....

Code:

2014-02-10 22:19:19.013 [INFO][20] checking for external access permission
2014-02-10 22:19:19.013 [INFO][20] externl access not allowed via NPVR Allow Remote Access API setting.
2014-02-10 22:19:19.013 [INFO][20] Using IP4 Address: 192.168.1.14
2014-02-10 22:19:19.013 [INFO][20] Valid Auto Login Network Detected
2014-02-10 22:19:19.013 [INFO][20]

There is nothing in nrecord log for 22:19 timeframe....

Can you look in your servers event logs around 22:18:11 timeframe for some sort of crash (i.e. .Net or something)

[Svekke]

Nope no errors in the eventviewer or something like that...

[mvallevand]

I can easily duplicate this error scenario choosing a multi-rec channel, but I am not sure if it is NEWA or the API at fault.

Martin