2016-01-06, 08:51 PM
I recently upgraded my NPVR server from Windows 7 Pro to Windows 10 Pro. Since then all recordings have failed with the following error, No Errors but no data delivered, this is usually because the device failed to lock a signal. I am also unable to watch Live TV. I get a blank screen which eventually comes back and gives me the following error The tuner you were using was required for a recording...
I have reinstalled NPVR, reinstalled Silicondust drivers, deleted and reinstalled NPVR, all to no avail and completely disabled the firewall on the server. I am able to tune to any channel using the Silicondust View application.
I've attached current server logs...
Any help would be appreciated...
I have reinstalled NPVR, reinstalled Silicondust drivers, deleted and reinstalled NPVR, all to no avail and completely disabled the firewall on the server. I am able to tune to any channel using the Silicondust View application.
I've attached current server logs...
Any help would be appreciated...
Chris
Server - Intel Core I3-3210 @ 3.40GHz - 8 GB RAM - Windows 10.0 Pro - Total Storage - 5.4 TB
Two Silicondust HD Prime CC capture, 6 tuners total
Client - Intel Core I3-3210 @3.2GHz - 4GB Ram - Windows 7.0 Pro
Client - Intel Core I3-3210 @2.9GHz - 4GB Ram - Windows 10.0 Pro
NAS - Intel Core I3-3220T @ 2.8GHz - 4GB RAM - Windows 10.0 Pro (Total Storage - 25 TB)
Two Silicondust HD Prime CC capture, 6 tuners total
Client - Intel Core I3-3210 @3.2GHz - 4GB Ram - Windows 7.0 Pro
Client - Intel Core I3-3210 @2.9GHz - 4GB Ram - Windows 10.0 Pro
NAS - Intel Core I3-3220T @ 2.8GHz - 4GB RAM - Windows 10.0 Pro (Total Storage - 25 TB)