Tuning satellite

[arrbee99]

Am trying to tune to Optus D1 but not getting anywhere. Does anyone know what the three spaces to the right of the satellite name are ? LOF1 LOF2 Switch I presume but in which order ?

[arrbee99]

btw you need to add an 'l' to satelite

[sub]

Does anyone know what the three spaces to the right of the satellite name are ? LOF1 LOF2 Switch I presume but in which order ?

Oops good point. I need to add labels to those.

It's the same order as they were shown in nextpvr.exe in the past. LOF1, Switch, LOF2.

[sub]

btw you need to add an 'l' to satelite

This typo in the drop down is fixed for the next build.

[arrbee99]

Thank you

[arrbee99]

You wouldn't happen to know those settings by any chance for Optus D1...

[sub]

It depends on the LNB on the end of the arm on the satellite dish. For my LNB I used 9750/11700/1060. Another couple of common ones in NZ are 11300/11300/11300 or 10750/10750/10750

[arrbee99]

Thanks. Finally got some channels somehow.

Feature request (unless its there already) - save / record / keep somewhere in app those LOF / Switch settings. If its ever necessary to retune / rescan / reinstall I'm forever savings settings that worked, never finding them again and trying 15 different combinations I get from geekzone or somewhere till I happen on the right combo. Thanks.

Also, when it finds channels, it has boxes for ticking, but the headings at the top of the list has a tick box also, should that be there ? I wasn't brave enough to tick it and see.

[sub]

Also, when it finds channels, it has boxes for ticking, but the headings at the top of the list has a tick box also, should that be there ? I wasn't brave enough to tick it and see.

The one in the heading selects/unselects all the channels.

[arrbee99]

Obvious answer I guess - how do I get it to come up with a guide ?

I found the guide, there's nothing in it

DUH, never mind, eventually spotted that enormous button...