Cannot transcode with Vaapi on intel GeminiLake [UHD Graphics 600]
|
2022-10-05, 09:15 PM
(2022-10-05, 08:57 PM)PaddytheKiwi Wrote: Thanks prahal, mine is The previous version didn't work either. I've never been able to get hardware encoding to run on this host with NextPVR. It works fine with a handbrake docker container.
2022-10-09, 06:13 PM
@ PaddyTheKiwi you might want to try to install intel-media-va-driver and/or intel-media-va-driver-non-free in the docker container for your Intel UHD 750.
intel-media-va-driver(-non-free) https://github.com/intel/media-driver Quote:The Intel® Media Driver for VAAPI is a new VA-API (Video Acceleration API) user mode driver supporting hardware accelerated decoding, encoding, and video post processing for GEN based graphics hardware. i965-va-driver(-shaders) https://github.com/intel/intel-vaapi-driver was: Quote:VA-API (Video Acceleration API) user mode driver for Intel GEN Graphics family Can you confirm intel-media-va-driver(-non-free) is installed in your handbrake container? And if you need the -non-free versoin for NextPVR encode to web? https://packages.debian.org/bullseye/int...-va-driver (the Debian free version has this limitation) Quote:Only a limited set of encoders is available via this driver: JPEG (Skylake and newer), AVC (Boxton and newer), HEVC and VP9 (Ice Lake and newer). Media shaders are only available on Ice Lake and newer.which is not on https://packages.debian.org/bullseye/int...r-non-free vainfo should show " vainfo: Driver version: Intel iHD driver for Intel® Gen Graphics - 21.1.1 ()" from /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so instead of "vainfo: Driver version: Intel i965 driver for Intel® Gemini Lake - 2.4.1" from /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so per Setup UHD 750 GPU on Intel Rocket Lake processors on Linux Mind if one install intel-media-va-driver in the container it takes precedence over i965-va-driver(-shaders). Ie here from: Code: root@argos:/app# vainfoto: Code: root@argos:/app# vainfo
2022-10-09, 08:27 PM
(This post was last modified: 2022-10-09, 08:28 PM by PaddytheKiwi.)
Thanks for your help again prahal, but unfortunately what you ask is beyond my capabilities. I understood that the required drivers were already installed in the updated container posted last week?
2022-10-09, 09:04 PM
@PaddyTheKiwi the driver for my card is included, but the ones for your card (Intel 750 UHD) likely is not.
to try the intel-media-va-driver you have to run this command in the container (or have someone build an image with this package included): Code: apt install intel-media-va-driver-non-freeCode: apt install intel-media-va-driverIf you are o with the command line this is doable. You need to open a console to the docker container for your nextpvr. If you manage your containers with a Web UI like portainer looks for a "console" button, or directly from the docker host shell: Code: docker exec -ti nextpvr /bin/bashPS/ you need to have permission to run docker command as your user to do the above without running your command with sudo. If you do not know how to do the above, you coud ask for someone to publish an image with this package added and test it.
2022-10-09, 09:27 PM
SUCCESS!
Thanks again prahal, much appreciated!
2024-10-20, 06:56 PM
Hi,
I've recently migrate my windows server to Unraid running on an N305 processor (using Docker). I am having a very similar issue as described in this thread regarding transcoding not working. With transcoding profile set to VAAPI and attempting to play a channel in the web player results in the following error 'Failed to start requested stream'. The error log is as follows: "ffmpeg version 4.3.4-0+deb11u1 Copyright © 2000-2021 the FFmpeg developers built with gcc 10 (Debian 10.2.1-6) configuration: --prefix=/usr --extra-version=0+deb11u1 --toolchain=hardened --libdir=/usr/lib/x86_64-linux-gnu --incdir=/usr/include/x86_64-linux-gnu --arch=amd64 --enable-gpl --disable-stripping --enable-avresample --disable-filter=resample --enable-gnutls --enable-ladspa --enable-libaom --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libcdio --enable-libcodec2 --enable-libdav1d --enable-libflite --enable-libfontconfig --enable-libfreetype --enable-libfribidi --enable-libgme --enable-libgsm --enable-libjack --enable-libmp3lame --enable-libmysofa --enable-libopenjpeg --enable-libopenmpt --enable-libopus --enable-libpulse --enable-librabbitmq --enable-librsvg --enable-librubberband --enable-libshine --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libsrt --enable-libssh --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvorbis --enable-libvpx --enable-libwavpack --enable-libwebp --enable-libx265 --enable-libxml2 --enable-libxvid --enable-libzmq --enable-libzvbi --enable-lv2 --enable-omx --enable-openal --enable-opencl --enable-opengl --enable-sdl2 --enable-pocketsphinx --enable-libmfx --enable-libdc1394 --enable-libdrm --enable-libiec61883 --enable-chromaprint --enable-frei0r --enable-libx264 --enable-shared libavutil 56. 51.100 / 56. 51.100 libavcodec 58. 91.100 / 58. 91.100 libavformat 58. 45.100 / 58. 45.100 libavdevice 58. 10.100 / 58. 10.100 libavfilter 7. 85.100 / 7. 85.100 libavresample 4. 0. 0 / 4. 0. 0 libswscale 5. 7.100 / 5. 7.100 libswresample 3. 7.100 / 3. 7.100 libpostproc 55. 7.100 / 55. 7.100 [AVHWDeviceContext @ 0x560227a564c0] libva: /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so init failed [AVHWDeviceContext @ 0x560227a564c0] libva: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed [AVHWDeviceContext @ 0x560227a564c0] Failed to initialise VAAPI connection: -1 (unknown libva error). Device creation failed: -5. Failed to set value '/dev/dri/renderD128' for option 'vaapi_device': Input/output error Error parsing global options: Input/output error" Running 'vainfo' in the container terminal gives: "error: XDG_RUNTIME_DIR not set in the environment. error: can't connect to X server! libva info: VA-API version 1.10.0 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so libva info: Found init function __vaDriverInit_1_10 libva error: /usr/lib/x86_64-linux-gnu/dri/iHD_drv_video.so init failed libva info: va_openDriver() returns 1 libva info: Trying to open /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so libva info: Found init function __vaDriverInit_1_8 libva error: /usr/lib/x86_64-linux-gnu/dri/i965_drv_video.so init failed libva info: va_openDriver() returns -1 vaInitialize failed with error code -1 (unknown libva error),exit" I have passed through dev/dri to the container, if I don't then I get a different error stating something like file not found. I have tried installing different vaapi/intel drivers within the container to little prevail. Transcoding works successfully in my emby container, vainfo gives: Trying display: drm libva info: VA-API version 1.18.0 libva info: Trying to open /lib/dri/iHD_drv_video.so libva info: Found init function __vaDriverInit_1_18 libva info: va_openDriver() returns 0 vainfo: VA-API version: 1.18 (libva 2.17.1) vainfo: Driver version: Intel iHD driver for Intel® Gen Graphics - 23.1.4 (12e141dc2) vainfo: Supported profile and entrypoints VAProfileNone : VAEntrypointVideoProc VAProfileNone : VAEntrypointStats VAProfileMPEG2Simple : VAEntrypointVLD VAProfileMPEG2Simple : VAEntrypointEncSlice VAProfileMPEG2Main : VAEntrypointVLD VAProfileMPEG2Main : VAEntrypointEncSlice VAProfileH264Main : VAEntrypointVLD VAProfileH264Main : VAEntrypointEncSlice VAProfileH264Main : VAEntrypointFEI VAProfileH264Main : VAEntrypointEncSliceLP VAProfileH264High : VAEntrypointVLD VAProfileH264High : VAEntrypointEncSlice VAProfileH264High : VAEntrypointFEI VAProfileH264High : VAEntrypointEncSliceLP VAProfileVC1Simple : VAEntrypointVLD VAProfileVC1Main : VAEntrypointVLD VAProfileVC1Advanced : VAEntrypointVLD VAProfileJPEGBaseline : VAEntrypointVLD VAProfileJPEGBaseline : VAEntrypointEncPicture VAProfileH264ConstrainedBaseline: VAEntrypointVLD VAProfileH264ConstrainedBaseline: VAEntrypointEncSlice VAProfileH264ConstrainedBaseline: VAEntrypointFEI VAProfileH264ConstrainedBaseline: VAEntrypointEncSliceLP VAProfileVP8Version0_3 : VAEntrypointVLD VAProfileHEVCMain : VAEntrypointVLD VAProfileHEVCMain : VAEntrypointEncSlice VAProfileHEVCMain : VAEntrypointFEI VAProfileHEVCMain : VAEntrypointEncSliceLP VAProfileHEVCMain10 : VAEntrypointVLD VAProfileHEVCMain10 : VAEntrypointEncSlice VAProfileHEVCMain10 : VAEntrypointEncSliceLP VAProfileVP9Profile0 : VAEntrypointVLD VAProfileVP9Profile0 : VAEntrypointEncSliceLP VAProfileVP9Profile1 : VAEntrypointVLD VAProfileVP9Profile1 : VAEntrypointEncSliceLP VAProfileVP9Profile2 : VAEntrypointVLD VAProfileVP9Profile2 : VAEntrypointEncSliceLP VAProfileVP9Profile3 : VAEntrypointVLD VAProfileVP9Profile3 : VAEntrypointEncSliceLP VAProfileHEVCMain12 : VAEntrypointVLD VAProfileHEVCMain12 : VAEntrypointEncSlice VAProfileHEVCMain422_10 : VAEntrypointVLD VAProfileHEVCMain422_10 : VAEntrypointEncSlice VAProfileHEVCMain422_12 : VAEntrypointVLD VAProfileHEVCMain422_12 : VAEntrypointEncSlice VAProfileHEVCMain444 : VAEntrypointVLD VAProfileHEVCMain444 : VAEntrypointEncSliceLP VAProfileHEVCMain444_10 : VAEntrypointVLD VAProfileHEVCMain444_10 : VAEntrypointEncSliceLP VAProfileHEVCMain444_12 : VAEntrypointVLD VAProfileHEVCSccMain : VAEntrypointVLD VAProfileHEVCSccMain : VAEntrypointEncSliceLP VAProfileHEVCSccMain10 : VAEntrypointVLD VAProfileHEVCSccMain10 : VAEntrypointEncSliceLP VAProfileHEVCSccMain444 : VAEntrypointVLD VAProfileHEVCSccMain444 : VAEntrypointEncSliceLP VAProfileAV1Profile0 : VAEntrypointVLD VAProfileHEVCSccMain444_10 : VAEntrypointVLD VAProfileHEVCSccMain444_10 : VAEntrypointEncSliceLP Any help would be greatly appreciated.
2024-10-20, 09:15 PM
NextPVR's Docker is very old, did you run an apt update when you were inside it?
Is Emby on the same machine? If so are you sure you can pass the h/w to two containers? That begs the question why do you need NextPVR web transcoding when the Emby transcoding is much more sophisticated. Martin
2024-10-22, 07:13 PM
Both containers run on the same machine and you can passthrough the HW to multiple containers simultaneously.
I am using both NextPVR and Emby as backends for Kodi (LiveTV and Offline media respectively). I have a fire stick that I use for travelling which also uses Kodi that remotes into my server and in that instance I require transcoding. I will attempt to apt update the whole container to see if that works...
Either way, I noticed that intel-media-va-driver-non-free (and intel-media-va-driver for the stripped version) is not included in the docker image. It is confirmed to fix VAAPI accel for Intel 750 UHD. This driver supports VAAPI for gen8 and above.
Could intel-media-va-driver-non-free be added to the docker image? QDivision Your N305 is from 2023Q1 it seems. So it requires intel-media-va-driver-non-free or intel-media-va-driver. Can you confirm you have installed the userspace driver in the nextpvr container ? Code: docker exec -ti nextpvr dpkg -l "intel-media-va-driver*"
2024-10-22, 09:17 PM
I have tried both those drivers, this is the output from that command:
Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Architecture Description +++-====================================-============-============-================================================ un intel-media-va-driver <none> <none> (no description available) ii intel-media-va-driver-non-free:amd64 21.1.1+ds1-1 amd64 VAAPI driver for the Intel GEN8+ Graphics family The main difference I can spot in the output from 'vainfo' on next/emby is next uses va-api v1.10 while emby uses v1.18....not sure how to update this? |
|
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Add Intel iHD Driver to Docker Image for NextPVR | thelanofvilles | 8 | 747 |
2024-06-16, 08:10 PM Last Post: thelanofvilles |
|
| Vaapi on Intel 11th Gen integrated graphics | PaddytheKiwi | 10 | 2,817 |
2022-04-17, 08:40 PM Last Post: PaddytheKiwi |
|
