suport for FusionHDTV USB ?

[hdtv_watcher]

Any chance you will get support for the FusionHDTV USB ?
For USA, ATSC.


I'm using WatchHDTV and it's ok, but GBPVR seems really awesome.

I see that the BDA is the BlueBird, DBA Tuner from the set up on the WatchHDTV program.

[sub]

If its got BDA drivers, it should already work. You may need to add the device to the BDA.ini file if the driver names are different from the other Fusion devices.

[hdtv_watcher]

Hi sub,
so I did the GraphEdit and found the BDA name:
Bluebird, BDA Tuner


so i put that in the BDA.ini

as this:
[Fusion HDTV -USB (ATSC)]
TUNING_TYPE=ATSC
FILTER_TUNER=Bluebird, BDA Tuner
FILTER_CAPTURE=Bluebird, WDM TsCapture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport
---

When I try to run the gbpvr i get the: No Channels Setup.
I've got the channel stuff in there via Zap2It

Anything else I need to do?

Thanks for your help.

[sub]

Its a bit manual setting up HDTV channels. A run down can be found here: http://gbpvr.com/pmwiki/pmwiki.php/Confi...HDTVSource

[hdtv_watcher]

Awesome sub,
it works!

the correct settings for the dba.ini:

[Fusion HDTV -USB (ATSC)]
TUNING_TYPE=ATSC
FILTER_TUNER=Bluebird, BDA Tuner
FILTER_CAPTURE=FusionHDTV, Transport Stream Capture
PIN_TUNER_IN=Input0
PIN_TUNER_OUT=MPEG2 Transport
PIN_CAPTURE_IN=MPEG2 Transport
PIN_CAPTURE_OUT=MPEG2 Transport


thanks!

[sub]

Cheers. I'll add it to the master file.

[crickert]

gbpvr is crashing when trying to tune live OTA broadcasts when used with the new dvico 3.2beta drivers. Can anyone else using gbpvr and the dvico usb atsc tuner confirm this. Do the dvico 3.11 bda drivers work better with gbpvr?

I really don't want to install the 3.2 software because it finally works very well when using the Dvico software for regular tv viewing. However, it doesn't work very well for DVR functions.

using: ffdshow, nvidia pure video, nvidia geforce mx440, amd 64 3200+, 512 mb ram.

Beyond TV 4 works so, so

I already posted information on another thread before I found this one. I think the other thread was for the euro version of the dvico USB tuner. sorry about the double post.

Is anyone having similar issues with the latest Dvico drivers?

[quirtep]

Greetings. I am fairly new to this, but am a long-time techie and programmer. I cannot seem t o get gbpvr to recognize my Dvico USB tuner. I am in the US and have the DViCo FusionHDTV5 USB Gold. I tried selecting what seemed to be the appropriate tuner in the dbpvr config area, but it doesn't work. Any suggestions? Could it be that since I recently upgraded to the newest Dvico driver that something needs to be added to the BDA.ini file? THANK YOU!

[crickert]

quirtep,

I still have the fusion 5 usb tuner. GBPvr does show a dvico option in my tuner config. With the dvico usb option selected, I still can't view live TV within GBpvr. I've had that issue for about a year now. The only thing I use it for is to record and playback my recordings. It works great for that. What version of gbpvr are you using? The newest?

Chris

[quirtep]

Yes, I see the FusionHDTV USB ATSC option in the config area - but when I select it, select "Map digital channels to EPG channels" it gives me an error about not being able to start the BDA device. If I tell if to "Only show devices detected on this machine" it doesn't detect the FusionHDTV card that I have plugged in. If I just leave "Fusion HDTV-USB (ATSC)" as the device type and then then exit config and open GB-PVR, it tells me that I have no channels configured.

It's a bummer. BeyondTV installs and works fine, but I just don't much like it...