divece checker

[tinev]

when i run the divece checker ,ther is only one tuner in the window.
i have cofigered 2 tunercards (pvr 150/pvr 350)and also in live tv can i see 2 tuners .What is the problem off this?It is also not possibel 2 programs at the same time recording.Only when i give the channels a other name.In manual recording can i choose wich channel i whil take (recording at the same time on the 2 tuners.)Where is the second tuner??

[gEd]

this message is very hard to read (sorry)

Yes, if you have 2 tuners, you can record 2 programs at the same time.

you need to make sure that the names of the tv channels are (exactly) the same for both tuners. (e.g BBC1 is NOT the same as BBC [space]1).

The names of the channels must also be the same as they appear in your EPG.

You cannot decide which device will record the program - this is not necessary.


can you please delete the 2 other duplicate threads that you have created.

[tinev]

thanks for the replay.But first sorry for the previus dubbel threads.When i submit the post yesterday eveving,the internet connection failed,so i try to do it again 3 times ,and the last time the thread was submit.( that is wat i was thinking)This morning i will delete the previus trheads but how is this possibel?
You understand my question,i think.When i give the channel the same name.GBPVR give a error when i try to record 2 programs at the same time.
When i giv the channel another name ,than its ok for GBPVR (2 recordings at the same time,but i choose the other name for the recording)than i run the device checker (like recomendit in the help files of GBPVR) and there i see only 1 tv tuner?
It is not easy to tell my problem in another languages.
Again sorry for the dubbel trheads.

[gEd]

To delete the other messages, select edit and then delete.
(Yes, the forum did hang for a short while yesterday evening).

so device checker can only see one device? You need to get both devices to appear in this list before you proceed.

Did you install the device drivers for each device?

Do the devices appear correctly in windows control panel, system, hardware (or do they have yellow ! marks)?

[tinev]

Hello,when i pusch the button edith ,i never see a button delete.
In my windows control panel looks everything ok.(No yellow ??)The 2 tuners are working,because i can see the different between the 2 tuners in live tv (1 tuner is pvr 150 and when starting up this tuner ,the first 10 seconds are not good collors "seems a problem with latest drivers off pvr 150??")When i set up the capture sources ,saysGBPVR when something not ok with de drivers i think,but everything go in the setup ok.
I removet the tuners from windows,"new hardware detected ,driver install ......,and after a while the 2 tuners appears in the control panel.I didth this several times.
Thanks for thinking with me gEd

[gEd]

"something not ok with de drivers "

what is the EXACT error message?

does gbpvr work 100% ok with just one of the tuners? If not, it would be better to remove 1 card and get the other one working 100% before adding the second card back again.

[tinev]

Ther coming,in the GBPVR window,after schedule the second recording,a blackscreen and GBPVR is blocked.After schut down the window (GBPVR) evrything is ok but de 2 recording is not in the window that gives the scheduled recordings.With 1 tuner works GBPVR ok.I will remove one tuner and do the setup again.I let you now.

[gEd]

get it working ok with one tuner and then backup the gbpvr folder so that you have a copy of that configuration.

when you try again with the 2nd tuner, set the error level to "debug" in the config application. When you reproduce the hang or crash, look inside the *.log files in the gbpvr folder for an error message and post these log files to the forum so we can take a look.

[tinev]

This is wath i have done:
Remove both tuners in windows divice manager,run hcwclear,schut down de computer.Remove the pvr 150 manualli,restart the computer.Install the pvr 350.look in the divice manager if everything ok and it whas ok.
Run device checker and no tuner visibel.Set up capture source,choose pvr 350 and everything ok.(but no tuner in device checker)
Schut down the computer ,put the pvr 150 in de computer,restart ,install........look in device manager.2tuners are there without yellow?.
Run device checker:only pvr 150 was visibel.Set up channels .chedule 2 recordings at the same time and with the second recording ,GBPVR ask for one off the 2 recordings to cancel .But when i look live tv and zap in my programs,(bv:één/canvas/kanaal2/één/canvas/kanaal2)on the 4 channel(same as channel one)GBPVR take tuner 2 (because the pvr 150 starts with 10 seconds bad collors ,thats the reason i see there are 2 tuners working,The same when i remove the cabel of tv distribution,3channels are gone)
Hooply you understand this.
This is a log file off the divice checker.Where can i find the log file in GBPVR?I dont see in de map GBPVR a file like ".log"

21:59:46.531 INFO Log started
21:59:46.531 VERBOSE ECP interface found

21:59:46.531 INFO Hauppauge WinTV PVR PCI II Capture: model 26034
21:59:46.578 VERBOSE ECP interface found

21:59:46.578 ERROR Failed to get ECP general string
21:59:46.593 VERBOSE FindFilterByName failed to locate filter: Hauppauge WinTV PVR PCI II Capture
21:59:46.593 ERROR Failed to find requested device: Hauppauge PVR150 (instance 3)

[sub]

The device checker may not work with PVR350's. I've only lightly tested it, and its only been tested in my machine with PVR150 and PVR500.