MicroATX motherboard and onboard video

imagn · 2009-04-02, 03:49 PM

So i am interested in getting one of the following boards and am interested in opinions about the onboard video and HD, especially playback of HD .ts recordings also mkvs and mp4's, i am planning on parring with either the AMD triple core 2.3gh or quadcore 2.3gh (depends how i feel about spending the extra for the quad

Board one:
http://www.newegg.com/Product/Product.as...6813138105

Board two:
http://www.newegg.com/Product/Product.as...6813157154

whurlston · 2009-04-03, 05:49 AM

If you are willing/able to spend more, I recommend the MSI Diva motherboard ($189):
http://www.newegg.com/Product/Product.as..._-13130206

Open box is $127: http://www.newegg.com/Product/Product.as..._-13130206

It's similar to the boards you are considering but it adds an additional 128MB of Sideport memory onboard for the video. The amp in this thing is phenomenal too Wink

There's also a 7.1 preamp version but after having both, I replaced my preamp with another amp card.

imagn · 2009-04-03, 01:35 PM

I am really just looking for somthing to make into a basic client that i can hook up to my HDTV in the bedroom. I know a popcorn hour would be good here, but i am exploring all options and will see what fits best for my situation

Still wondering if the ati HD 3200 onboard will be sufficeint for an HD client, atleast 720p and 1080i streams

Thanks

Dave_M · 2009-04-03, 02:52 PM

AS Rock motherboards can be crappy so get an Asus or gigabyte or similar. Any old motherboard will do but should have DVI or HDMI output.

mikeh49 · 2009-04-03, 03:07 PM

I just got a Gigabyte 780G board (the one with US2H suffix) and don't have it sorted yet. Getting good video out of this thing is not a slam-dunk. So far, my old 9600Pro was better. I have a X2 5600+ CPU, which should be enough; I haven't checked the utilization while playing video. I think I currently have a botched XP installation, so a clean re-install will be next. There has been lots of discussion here on 780G boards - in general, the promise has been greater than the delivery. I'll post back if I get a good setup.

imagn · 2009-04-03, 03:39 PM

mikeh49 Wrote:I just got a Gigabyte 780G board (the one with US2H suffix) and don't have it sorted yet. Getting good video out of this thing is not a slam-dunk. So far, my old 9600Pro was better. I have a X2 5600+ CPU, which should be enough; I haven't checked the utilization while playing video. I think I currently have a botched XP installation, so a clean re-install will be next. There has been lots of discussion here on 780G boards - in general, the promise has been greater than the delivery. I'll post back if I get a good setup.

Yeah i have seen some threads about it, just curios would this board have similar issues it seem updated (well it is obviously not 780g), it is another i am thinking about, i built a desktop recently with a biostar motherboard and its rock solid so far
http://www.newegg.com/Product/Product.as...6813138140

whurlston · 2009-04-03, 03:57 PM

I get good performance out of the 3200 (even with Bluray) but then I have the additional sideport memory. I did have to disable Aero in order to get Vector Adaptive deinterlacing. Not sure how well a standard 3200 does, sorry.

imagn · 2009-04-03, 04:27 PM

whurlston Wrote:I get good performance out of the 3200 (even with Bluray) but then I have the additional sideport memory. I did have to disable Aero in order to get Vector Adaptive deinterlacing. Not sure how well a standard 3200 does, sorry.

This is good new, i think i am probably going to go with this board:
http://www.newegg.com/Product/Product.as...6813138140

as it has the side port mem and seems to be updated, i just didnt want to spend a lot on this, but still evaluating to see whats out there, i wish there was more info about the next gen NMT and Hauppauge HDMVP

gbpvriwanna · 2009-04-03, 04:34 PM

a word of caution.. Am not sure which tuner card you plan on getting but if you get an AMD board, you may have issues with the HVR1600. I returned my HVR1600 and got the ATI650PCIE.

imagn · 2009-04-03, 04:47 PM

gbpvriwanna Wrote:a word of caution.. Am not sure which tuner card you plan on getting but if you get an AMD board, you may have issues with the HVR1600. I returned my HVR1600 and got the ATI650PCIE.

Thanks,

this is going to be a client with no tuners, i have a server funnily enough its an amd and have a hvr1600 that i have no issues with and will be using for delivery of all media

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	Motherboard with PCI slots available?	bgowland	2	293	2025-04-15, 08:33 PM Last Post: bgowland
	No MPEG2 Video Decoder = "disabled" - can't watch OTA TV	bickertn	0	2,603	2016-10-31, 02:51 PM Last Post: bickertn
	Motherboard HTPC header	liteswap	7	4,609	2015-06-14, 05:42 PM Last Post: liteswap
	video and tuner card help please...	canonbeck	3	3,137	2014-04-24, 10:23 AM Last Post: martint123
	Dead motherboard - thoughts on ASRock replacement?	wodger	9	3,973	2014-02-20, 04:18 AM Last Post: stustunz
	HVR-1800, Analog Hauppaugew WinTV 885 Video Capture vs Tuner/Demod?	notso99	5	5,233	2013-06-20, 10:31 PM Last Post: mvallevand
	PVR500MCE analog card - captured video is pixelated with minor skips	drugstore_cowboy	2	1,789	2013-01-29, 06:57 AM Last Post: drugstore_cowboy
	HDMI 1.3 PCI Video capture card with HDCP bypass	jam_zhou	8	13,167	2012-08-17, 06:33 PM Last Post: Reddwarf
	No beeps, no video, no hope?	keith_leitch	15	4,558	2011-10-04, 10:54 PM Last Post: jcjefferies
	Atom 330 Nvidia ION motherboard	jcjefferies	4	2,682	2011-07-29, 01:00 PM Last Post: tmrt