2012-11-13, 06:25 PM
I had this working previously with an older version and W7 (had many issues to make it work), now i upgraded to W8 and cant make it work. i have a w7 acting as a NPVR server, this is the client im having problems with.
All video codecs set to LAV and EVR to render, everything else set to DISABLED.
I get the "please wait" screen and then the program doesnt respond.
The server shows that the recording is working and if i later reproduce the .TS file recorded with mplayerclassic it works fine, so the video is getting recorded fine.
This is the client log:
2012-11-13 15:17:15.343 [DEBUG][1] GetServerStatus() returns:
<Status>
<Device oid="22" identifier="Conexant Polaris Video Capture:1">
</Device>
<Device oid="21" identifier="Conexant Polaris BDA Tuner:1">
</Device>
</Status>
2012-11-13 15:17:15.343 [DEBUG][1] StartLiveTV@1
2012-11-13 15:17:15.343 [DEBUG][1] StartLiveTV@2
2012-11-13 15:17:15.358 [DEBUG][1] StartLiveTV@3
2012-11-13 15:17:15.358 [DEBUG][1] StartLiveTV@4
2012-11-13 15:17:17.103 [DEBUG][1] Client got streaming handle: 150035
2012-11-13 15:17:17.103 [DEBUG][1] service type is: 1
2012-11-13 15:17:17.103 [DEBUG][1] StartLiveTV@5
2012-11-13 15:17:17.113 [DEBUG][1] Using 'NPVR TS Reader2'
2012-11-13 15:17:20.235 [DEBUG][1] RenderDemux()
2012-11-13 15:17:20.235 [DEBUG][1] Adding system HE-AAC decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.235 [DEBUG][1] Adding system AC3 decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.235 [DEBUG][1] Adding system MPEG1 Layer2 decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.240 [DEBUG][1] Adding system E-AC3 decoder
2012-11-13 15:17:20.240 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.245 [DEBUG][1] Adding system MPEG2 decoder
2012-11-13 15:17:20.245 [DEBUG][1] Adding EVR renderer
2012-11-13 15:17:20.288 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.793 [DEBUG][1] restoring last aspect ratio
Also when going to "Videos" and try to open one of those .TS (i copied it from the server to the client folder, since i cant connect the tunner here), i get an exception error:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Runtime.Remoting.RemotingException: Server encountered an internal error. For more information, turn off customErrors in the server's .config file.
Server stack trace:
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at NShared.IRecordingService.GetExtraInfo(String key, String extra)
at NShared.RecordingServiceProxy.GetExtraInfo(String key, String extra)
at Native.PlaybackNative.PlayLiveStream(IntPtr hwndIntPtr, String filename, Int32 serviceType, String& message)
at Native.PlaybackNative.PlayVideoFileTS(IntPtr hwndIntPtr, String filename, String& message)
at Native.PlaybackNative.PlayVideoFile(IntPtr hwndIntPtr, String filename, String& message)
at NextPVR.Players.PlaybackProxyFactory.StartVideoPlaybackProxy(IntPtr window, String filename, String& reason)
at NextPVR.Players.VideoPlayer.PlayFiles(List`1 playQueue, Int32 playQueueIndex, String& reason)
at NextPVR.Players.VideoPlayer.PlayFile(String filename, String& reason)
at NextPVR.ControllerForm.PlayVideoFile(String filename)
at NextPVR.Libraries.VideoLibrary.ActivateItem(ListObject selectedObject)
at NUtility.Controls.ListRenderers.UiListList.OnDblClick(PointF point)
at NUtility.Controls.UiList.OnDblClick(PointF point)
at NextPVR.Libraries.BaseLibrary.OnDblClick(PointF location)
at NextPVR.ControllerForm.ControllerForm_MouseDoubleClick(Object sender, MouseEventArgs e)
at System.Windows.Forms.Control.OnMouseDoubleClick(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at NextPVR.ControllerForm.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
(...)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any help to make this work would be appreciated.
This is a brand new install with only the K-Lite Codec installed, tried setting all the codecs to DISABLED, same problem, all to FFDSHOW, same problem, all to LAV, same problem.
All video codecs set to LAV and EVR to render, everything else set to DISABLED.
I get the "please wait" screen and then the program doesnt respond.
The server shows that the recording is working and if i later reproduce the .TS file recorded with mplayerclassic it works fine, so the video is getting recorded fine.
This is the client log:
2012-11-13 15:17:15.343 [DEBUG][1] GetServerStatus() returns:
<Status>
<Device oid="22" identifier="Conexant Polaris Video Capture:1">
</Device>
<Device oid="21" identifier="Conexant Polaris BDA Tuner:1">
</Device>
</Status>
2012-11-13 15:17:15.343 [DEBUG][1] StartLiveTV@1
2012-11-13 15:17:15.343 [DEBUG][1] StartLiveTV@2
2012-11-13 15:17:15.358 [DEBUG][1] StartLiveTV@3
2012-11-13 15:17:15.358 [DEBUG][1] StartLiveTV@4
2012-11-13 15:17:17.103 [DEBUG][1] Client got streaming handle: 150035
2012-11-13 15:17:17.103 [DEBUG][1] service type is: 1
2012-11-13 15:17:17.103 [DEBUG][1] StartLiveTV@5
2012-11-13 15:17:17.113 [DEBUG][1] Using 'NPVR TS Reader2'
2012-11-13 15:17:20.235 [DEBUG][1] RenderDemux()
2012-11-13 15:17:20.235 [DEBUG][1] Adding system HE-AAC decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.235 [DEBUG][1] Adding system AC3 decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.235 [DEBUG][1] Adding system MPEG1 Layer2 decoder
2012-11-13 15:17:20.235 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.240 [DEBUG][1] Adding system E-AC3 decoder
2012-11-13 15:17:20.240 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.245 [DEBUG][1] Adding system MPEG2 decoder
2012-11-13 15:17:20.245 [DEBUG][1] Adding EVR renderer
2012-11-13 15:17:20.288 [ERROR][1] Unable to find named decoder
2012-11-13 15:17:20.793 [DEBUG][1] restoring last aspect ratio
Also when going to "Videos" and try to open one of those .TS (i copied it from the server to the client folder, since i cant connect the tunner here), i get an exception error:
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Runtime.Remoting.RemotingException: Server encountered an internal error. For more information, turn off customErrors in the server's .config file.
Server stack trace:
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at NShared.IRecordingService.GetExtraInfo(String key, String extra)
at NShared.RecordingServiceProxy.GetExtraInfo(String key, String extra)
at Native.PlaybackNative.PlayLiveStream(IntPtr hwndIntPtr, String filename, Int32 serviceType, String& message)
at Native.PlaybackNative.PlayVideoFileTS(IntPtr hwndIntPtr, String filename, String& message)
at Native.PlaybackNative.PlayVideoFile(IntPtr hwndIntPtr, String filename, String& message)
at NextPVR.Players.PlaybackProxyFactory.StartVideoPlaybackProxy(IntPtr window, String filename, String& reason)
at NextPVR.Players.VideoPlayer.PlayFiles(List`1 playQueue, Int32 playQueueIndex, String& reason)
at NextPVR.Players.VideoPlayer.PlayFile(String filename, String& reason)
at NextPVR.ControllerForm.PlayVideoFile(String filename)
at NextPVR.Libraries.VideoLibrary.ActivateItem(ListObject selectedObject)
at NUtility.Controls.ListRenderers.UiListList.OnDblClick(PointF point)
at NUtility.Controls.UiList.OnDblClick(PointF point)
at NextPVR.Libraries.BaseLibrary.OnDblClick(PointF location)
at NextPVR.ControllerForm.ControllerForm_MouseDoubleClick(Object sender, MouseEventArgs e)
at System.Windows.Forms.Control.OnMouseDoubleClick(MouseEventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at NextPVR.ControllerForm.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
(...)
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Any help to make this work would be appreciated.
This is a brand new install with only the K-Lite Codec installed, tried setting all the codecs to DISABLED, same problem, all to FFDSHOW, same problem, all to LAV, same problem.