HDHomeRun No channels QAM scan

[thezfunk]

Hi Everyone.

First time posting here. I will try to provide and explain everything thoroughly. I have used search and have tried various solutions I have found on the forums and in the wiki and just Google in general. I have attached my logs in the requested format. I have all firewalls OFF.

I have a Windows 2008 R2 server running NPVR with the hopes of using it to record and then using XBMC as clients on Ouyas (works really well, btw). I have Time Warner Cable with extremely basic channels. I have my HDHomeRun working through it's app and their quicktv as well VLC. I have tried NPVR and 'Other QAM' in HDHomeRun's software. I have disabled all tuners in NPVR except the QAM. NPVR does see the tuner; scans yield no channels. Actually, when I am trying to scan it just stays on 'channel 1' and never gets further than that. I just click 'OK' and close the window.

Hopefully, my logs have a red flag or two that can help. If I forgot anything, let me know. Thanks for any help that can be provided.

[sub]

2013-10-26 11:52:21.311 [DEBUG][1] FindFilterByName failed to locate filter: Microsoft Network Provider
2013-10-26 11:52:21.312 [DEBUG][1] FindFilterByName failed to locate filter: Microsoft ATSC Network Provider

Your machine is missing the Microsoft BDA components.

Google "Windows 2008 BDA"

[Zeb]

This seems to be "BDA Day." Here's an old thread that might be helpful: http://forums.nextpvr.com/showthread.php...r2-problem

[thezfunk]

Thanks for looking guys. I thought I had installed BDA and I had...only I forgot I rebuilt my server since then. I actually had all the files already. I installed it and took a look at those threads. It still doesn't work but now I get an error message when I try and perform a scan. It says: Unable to start device: QAM tuning failed.

New logs attached.

[mvallevand]

Thanks for looking guys. I thought I had installed BDA and I had...only I forgot I rebuilt my server since then. I actually had all the files already. I installed it and took a look at those threads. It still doesn't work but now I get an error message when I try and perform a scan. It says: Unable to start device: QAM tuning failed.

New logs attached.

Can you get the SiliconDust software to run?

Martin

[thezfunk]

Yes, that works, no problem.

[sub]

2013-10-26 14:32:18.614 [ERROR][1] Failed to create IATSCLocator

There is still something wrong with the BDA setup on your machine.

[sub]

For the record, the SiliconDust app doesn't use BDA, so isn't a good test for whether BDA is working on your machine.

[Zeb]

On Settings->Devices, if you've been trying to scan Type HDHR devices, disable those (they're for cablecard) and scan Type QAM devices. If the firewall is back on, make sure NDigitalHost has an exception.

[thezfunk]

There is still something wrong with the BDA setup on your machine.

I'll try installing it again but I can't figure out what 'something' is.