2014-02-01, 12:09 AM
Been running the old GBPVR for years but having moved house, have taken the plunge to update to NPVR
As with my experience when first installing GBPVR, things aren't quite going to plan.
I have a BlackGold DVB T & S tuner and it scans & finds channels ok. Having reduced the channel list down to those I actually want, I've checked they're all set to OTA EPG update. If I manually update the EPG, it gets populated as you would expect. A day later after the auto-update has run, the EPG is empty :confused:
I've checked the log and there are no error messages showing, indeed the extract below is an example of what I see for all channels:-
2014-01-31 02:33:15.747 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
3 seconds remaining...
2014-01-31 02:33:16.737 [DEBUG][10] EPG@3.1-3
2014-01-31 02:33:16.737 [DEBUG][10] EPG@3-2
2014-01-31 02:33:16.737 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
2 seconds remaining...
2014-01-31 02:33:17.727 [DEBUG][10] EPG@3.1-2
2014-01-31 02:33:17.727 [DEBUG][10] EPG@3-1
2014-01-31 02:33:17.727 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
1 seconds remaining...
2014-01-31 02:33:18.717 [DEBUG][10] EPG@3.1-1
2014-01-31 02:33:18.717 [DEBUG][10] EPG@4
2014-01-31 02:33:18.717 [DEBUG][10] - saving 118 listings for channel: ITV2
2014-01-31 02:33:18.717 [DEBUG][10] - saving 118 listings for channel: ITV4
2014-01-31 02:33:18.717 [DEBUG][10] Deleting old listings from Channel OID: 7727 (ITV2)
2014-01-31 02:33:18.717 [DEBUG][10] Deleting old listings from Channel OID: 7729 (ITV4)
2014-01-31 02:33:18.727 [DEBUG][10] EPG@5
2014-01-31 02:33:18.727 [DEBUG][10] EPG@StopStream: 4
2014-01-31 02:33:18.727 [DEBUG][10] StopStream(4)
2014-01-31 02:33:19.277 [DEBUG][10] Asking NDigitalHost to start: c:\devxxxxxx\null.ts
2014-01-31 02:33:22.895 [DEBUG][10] EPG@1 is using handle: 5
2014-01-31 02:33:22.895 [DEBUG][10] EPG@2
2014-01-31 02:33:22.895 [DEBUG][10] EPG@3-60
2014-01-31 02:33:22.895 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
60 seconds remaining...
2014-01-31 02:33:23.885 [DEBUG][10] EPG@3.1-60
2014-01-31 02:33:23.885 [DEBUG][10] EPG@3-59
2014-01-31 02:33:23.885 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
59 seconds remaining...
2014-01-31 02:33:24.875 [DEBUG][10] EPG@3.1-59
2014-01-31 02:33:24.875 [DEBUG][10] EPG@3-58
2014-01-31 02:33:24.875 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
58 seconds remaining...
this seems to imply that the scan finds EPG data and then saves it..... yet there's nothing there and the existing data deleted.
Any ideas what's going wrong?
As with my experience when first installing GBPVR, things aren't quite going to plan.
I have a BlackGold DVB T & S tuner and it scans & finds channels ok. Having reduced the channel list down to those I actually want, I've checked they're all set to OTA EPG update. If I manually update the EPG, it gets populated as you would expect. A day later after the auto-update has run, the EPG is empty :confused:
I've checked the log and there are no error messages showing, indeed the extract below is an example of what I see for all channels:-
2014-01-31 02:33:15.747 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
3 seconds remaining...
2014-01-31 02:33:16.737 [DEBUG][10] EPG@3.1-3
2014-01-31 02:33:16.737 [DEBUG][10] EPG@3-2
2014-01-31 02:33:16.737 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
2 seconds remaining...
2014-01-31 02:33:17.727 [DEBUG][10] EPG@3.1-2
2014-01-31 02:33:17.727 [DEBUG][10] EPG@3-1
2014-01-31 02:33:17.727 [DEBUG][10] Scanning Freq:10758/V/22000 SID:10070
1 seconds remaining...
2014-01-31 02:33:18.717 [DEBUG][10] EPG@3.1-1
2014-01-31 02:33:18.717 [DEBUG][10] EPG@4
2014-01-31 02:33:18.717 [DEBUG][10] - saving 118 listings for channel: ITV2
2014-01-31 02:33:18.717 [DEBUG][10] - saving 118 listings for channel: ITV4
2014-01-31 02:33:18.717 [DEBUG][10] Deleting old listings from Channel OID: 7727 (ITV2)
2014-01-31 02:33:18.717 [DEBUG][10] Deleting old listings from Channel OID: 7729 (ITV4)
2014-01-31 02:33:18.727 [DEBUG][10] EPG@5
2014-01-31 02:33:18.727 [DEBUG][10] EPG@StopStream: 4
2014-01-31 02:33:18.727 [DEBUG][10] StopStream(4)
2014-01-31 02:33:19.277 [DEBUG][10] Asking NDigitalHost to start: c:\devxxxxxx\null.ts
2014-01-31 02:33:22.895 [DEBUG][10] EPG@1 is using handle: 5
2014-01-31 02:33:22.895 [DEBUG][10] EPG@2
2014-01-31 02:33:22.895 [DEBUG][10] EPG@3-60
2014-01-31 02:33:22.895 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
60 seconds remaining...
2014-01-31 02:33:23.885 [DEBUG][10] EPG@3.1-60
2014-01-31 02:33:23.885 [DEBUG][10] EPG@3-59
2014-01-31 02:33:23.885 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
59 seconds remaining...
2014-01-31 02:33:24.875 [DEBUG][10] EPG@3.1-59
2014-01-31 02:33:24.875 [DEBUG][10] EPG@3-58
2014-01-31 02:33:24.875 [DEBUG][10] Scanning Freq:10906/V/22000 SID:10260
58 seconds remaining...
this seems to imply that the scan finds EPG data and then saves it..... yet there's nothing there and the existing data deleted.
Any ideas what's going wrong?
NPVR Version= 6.1.5.231022
Intel i7 Quad Core 3200 + 16GB DDR3 Gigabyte Motherboard
Windows 11 Pro 64bit
TBS-6902 dual DVB-S tuner
TBS-6205 quad DVB-T tuner
500Gb System Disk (M2 Nvme SSD)
4Tb Media Store (2 x 2Tb M2 Nvme SSD Raid 0)
Raspberry Pi2, Pi3 B+ and Pi4 B all running OSMC (Kodi v20.2)
Intel i7 Quad Core 3200 + 16GB DDR3 Gigabyte Motherboard
Windows 11 Pro 64bit
TBS-6902 dual DVB-S tuner
TBS-6205 quad DVB-T tuner
500Gb System Disk (M2 Nvme SSD)
4Tb Media Store (2 x 2Tb M2 Nvme SSD Raid 0)
Raspberry Pi2, Pi3 B+ and Pi4 B all running OSMC (Kodi v20.2)