Sat IP scans

[spudjg1]

Unable to scan sat Ip, I get the option to scan my local provider. It starts the scan but I dont get any channels I goes through the motion and shows it scanning the frequencys and also it has crashed my PC sometimes. I have tried the same settings on npvr v4 and it works fine and I get all channels

[sub]

You'd probably need to post the logs showing the scan.

v4 and v5 work very differently when it comes to SAT>IP. Entirely new code.

What type of SAT>IP device are you using?

[spudjg1]

You'd probably need to post the logs showing the scan.

v4 and v5 work very differently when it comes to SAT>IP. Entirely new code.

What type of SAT>IP device are you using?

Okay thanks, please see attached logs.

I’m using DVB-S2 RTSP /DVB-T RTSP both udp protocol on the same machine as npvr (localhost:8089), provided by dvb viewer software. I have been able to create a m3u and receive the channel list via iptv on npvr.

[sub]

It looks like it's failing to connect to the machine. Can you temporarily try disabling your firewall to see if it makes any difference?

[spudjg1]

i have disabled kaspersky and windows firewall, still no luck.

[sub]

If you open this URL in VLC, do you see video? (assuming that is one of the frequencies you'd usually get video on)

rtsp://192.168.222.239:554/?src=1&freq=10714&sr=22000&pol=h&fec=56&msys=dvbs&mtype=qpsk&pids=all

[spudjg1]

no i dont see video, but it seams to be streming doutfire the play bar is moveing along but no video

[sub]

Is this on Windows or Linux?

[spudjg1]

windows

[sub]

Can you try running this utility, and let me know what output you get?

Code:

SATIPTest.exe "rtsp://192.168.222.239:554/?src=1&freq=10714&sr=22000&pol=h&fec=56&msys=dvbs&mtype=qpsk&pids=all"