Problems with DVBC tuners

[mvallevand]

I wonder if the FilterCheck.exe from v4 would help?

Martin

[daneo]

Hi Martin,

I've run it, however it does not enumerate the pins - attached is the log from the run.


  FilterCheck.zip (Size: 711 bytes / Downloads: 1)

Looking into GraphEdit more, it will enumerate the pins, however can't save into a text file - just screenshots.

At the moment I am not sure how I can help any more to resolve this.

[sub]

Can you run this newer filtercheck.exe and supply it's filtercheck.log?

[daneo]

Hi Sub,

Many thanks - attached are the results - they look *strange* as the pinning for the outputs are all zero (is this normal?) - however the pin names are correct. I've also run GraphStudio and added a screenshot of what it is showing for the pin results.


  FilterCheck.zip (Size: 903 bytes / Downloads: 2)

   

[sub]

Unfortunately your tuner filters don't seem to have output pins by default. They may only show up after the connected to something up stream. Without these pins, FilterCheck can't list the output pin mediums, which are used for detecting which tuner filters go with which capture filters.

I'm not really sure what to do about your problem just yet.

[sub]

2020-03-29 14:18:36.170 [DEBUG][4] Forcing use of 'Digital Devices Digital Video Capture 1'

What date is your Unmanaged.dll? This log message should not be there in the current release.

[sub]

You could see if replacing your Unmanaged.dll with this version helps.

[daneo]

Hi Sub,

swapping out the DLL fixed everything - tuners are all working now. I'm running some scheduling and recording tests over the next couple of days.

The old DLL was from 29.12.2019..

Attached are the logs if you want to take a look at how it went.


  logs-20200401-1014.zip (Size: 1.06 MB / Downloads: 0)

Regards,
Dane

[sub]

Great

[WW11_OldSchool]

Hi!
I also have two Digital Devices Cards (Cine CT V6 and Max M4) with 4 Cable Tuners each.

All 8 Tuners are shown in the configuration but when I try to access more than 4 of them I am beeing blocked from doing so.

I stumbled accross this thread but I assume that the changes to unmanaged.dll that fixed the issue are already implemented in the newest version of NextPVR I am running.

So what could be the solution in my case?

Regards,
Matthias

Machine: Windows 10x64
Cards:
- Digital Devices Cine CT V6 (4 Tuners)
- Digital Devices Max M4 (4 Tuners)
Provider:
German Cable (Vodafone)