I upgraded to Windows 10, everything with NPVR appears to work fine on the desktop. However, I have 2 A-110's which are both not connecting. When it boots, I see my network share, select it, but then get "Invalid username or password".
It's been years since I last went through this setup. I seem to recall I had to setup a Guest account in Win7? Is that still the case? In any case, I could use some direction from someone who's more familiar with the setup process. Thanks!
I guess I should post the NMT Syntax Check output:
Checking for mvpmc share on DAD-PC
mvpmc C:\mvpmc
Checking GB-PVR.html links
C:\mvpmc \GB-PVR.html not found
NMT IP Address: 192.168.1.108 MAC 0006DC435226
GB-PVR Not Installed
N-PVR Installed C:\Users\Public\NPVR
<a href="http://localhost.drives:8883/NETWORK_SHARE/DAD-PC:mvpmc/npvr.cgi">N-PVR</a>
<a href="http://localhost.drives:8883/NETWORK_SHARE/NETWORK_BROWSER/browser.cgi">N-PVR via Network Browser</a>
<a href="http://localhost.drives:8883/USB_DRIVE_A-1/mvpmc/usb_a.cgi">N-PVR via USB</a>
config.xml entry found Client Type PCH2
MVPName BEDROOM
MVPClientType PCH2
MVPWidth 700
MVPHeight 560
MVPOffsetX 40
MVPOffsetY 0
MVPSendIncrementalUpdates true
MVPAspectRatio default
MVPSkin Default
MVPPreferredMenuStyle slideout
Enabled true
Port 8866
The remote server returned an error: (404) Not Found.
Checking NMT Version
01-17-110314-15-POP-403-000
Checking NMT Display
NTSC
Calling NMT Source
DAD-PC:mvpmc
smb://DAD-PC/mvpmc Username: Password Length: 0
mvallevand Wrote:Yes you will see need a Wn10 guest account that tha PCH can get if you don't use the USB option.
It try this http://www.tenforums.com/network-sharing...post183587 first.
Hmmm... if you mean the instructions below:
Using REGEDIT it's necessary to create a DWORD value called 'AllowInsecureGuestAuth' in HKLM\SYSTEM\CurrentControlSet\Services\LanmanWorkstation\Parameters and set this new value to 1.
I did that, and nothing changed.
I was able to get to the point where the NPVR menu is displayed... had to change some Advanced Sharing settings in Win 10.
But now when I select a recording to watch, I just get a black screen. If I wait for a minute or two, the NPVR screen eventually reappears. But it isn't playing back recordings.
dongna Wrote:I was able to get to the point where the NPVR menu is displayed... had to change some Advanced Sharing settings in Win 10.
But now when I select a recording to watch, I just get a black screen. If I wait for a minute or two, the NPVR screen eventually reappears. But it isn't playing back recordings.
Power off/on the NMT and if that doesn't help, send logs.
Martin
mvallevand Wrote:Power off/on the NMT and if that doesn't help, send logs.
Unfortunately, powering the NMT off/on did not help... same symptoms.
Logs attached as requested.
dongna Wrote:Unfortunately, powering the NMT off/on did not help... same symptoms.
Logs attached as requested.
I don't see NEWA running in those logs, can you connect to it from
http://localhost:8866
Martin
mvallevand Wrote:I don't see NEWA running in those logs, can you connect to it from http://localhost:8866
I'm afraid I don't even know what that is.
I clicked on your link and got "This site can't be reached... localhost refused to connect"?
dongna Wrote:I'm afraid I don't even know what that is.
I clicked on your link and got "This site can't be reached... localhost refused to connect"?
That is the NextPVR web server. You need to have it running to play video. Try rebooting the server and trying the link again.
Martin