I am running Nextdvr on a Windows 11 machine. I also have a Synology 218+ and watch through Apple TVs. How do I save my recording to the Synology rather than my windows machine? I have no clue on how to run docker but am willing to try if someone can please point me to a step-by-step tutorial specific to installing Nextdvr on my NAS. 

thanks,

Joe

I just tried in the Recordings view with both the new icon view and the old list view. Neither seems to work when I select a folder and then go to the hidden menu Archive option. I am able to select the destination. And I get a pop-up saying "Archiving", but the things don't get moved. This used to work with the old Recordings list. Attached are a set of logs from this attempt in the NextPVR.exe client on the server. (Previously I've tried via uidroid, and that doesn't work either.)

Archiving of a single episode from the What's New list still works ok.

Attached Files

  logs-20220319-1318.zip (Size: 1.26 MB / Downloads: 0)

Sub:

Would it be possible for NextPVR to sort the entries in the _clientstore.xml files so that the plain and the "_video" versions were next to each other and so that it was easier to find a specific entry?

Also, is the lookup case-sensitive? I notice that I have a few "duplicate" entries (e.g. KeyCode-INFO_video, KeyCode-info_video) where only the keycode case is different. I'm wondering if that is from early testing or if I really need the duplicates.

Right now, I've got sort of a bit of a jumbled mess:

Where does NextPVR 4.2.4 (190307) get the date/time for recordings from?

All my recordings start 90 sec early and would like to adjust them.

Thanks!

Does anyone else find that Schedules Direct misses data for the show and season info so the shows don't get named with a SXXEXX frequently?  I've emailed them about individual instances, but it seems almost all of my shows have a some episodes that are missing the season and episode numbers.  Usually NextPVR has the show subtitle so I can see the name there, but using the files elsewhere is tough without the season and episode numbers.

Hello,
I have a problem with the EPG on some Channels. All others are OK, but on this I have no epg, only Text "(no Listings)".
The channels are SAT.1(v53626), Welt der Wunder(51043), eurenews(v53625), N24Doku(v51037), RTL(v36601).
All Channels are Mapped to Source DVB/ATSC EPG

The HD Homerun software finds the EPG of this Channels.
Can I do something in nextpvr(5.2.6.220206 ) to get the epg?

thx

Cyberbob

Hello,

I've been trying install NextPVR (the latest) on a new system. I cannot and I'm not sure what the issue is.  It's a windows 10 64 machine and I have all the updates, .net is installed too. When I go to install from the stub installer, the UAC prompt comes up, I select yes and nothing happens. The only thing are entries in event viewer but I don't know what it's referencing. 
=================================
evventid: 1026 from .netruntime

Application: NPVRSetup.exe
Framework Version: v4.0.30319
Description: The process was terminated due to an unhandled exception.
Exception Info: System.IO.DirectoryNotFoundException
  at System.IO.__Error.WinIOError(Int32, System.String)
  at System.IO.FileStream.Init(System.String, System.IO.FileMode, System.IO.FileAccess, Int32, Boolean, System.IO.FileShare, Int32, System.IO.FileOptions, SECURITY_ATTRIBUTES, System.String, Boolean, Boolean, Boolean)
  at System.IO.FileStream..ctor(System.String, System.IO.FileMode, System.IO.FileAccess, System.IO.FileShare, Int32, System.IO.FileOptions, System.String, Boolean, Boolean, Boolean)
  at System.IO.StreamWriter.CreateFile(System.String, Boolean, Boolean)
  at System.IO.StreamWriter..ctor(System.String, Boolean, System.Text.Encoding, Int32, Boolean)
  at System.IO.StreamWriter..ctor(System.String, Boolean)
  at System.IO.File.CreateText(System.String)
  at UpdateNPVR.InstallForm..ctor(System.String)
  at UpdateNPVR.Program.Main(System.String[])
=================================


=================================
eventid 1000, Application error

Faulting application name: NPVRSetup.exe, version: 1.0.0.0, time stamp: 0xdfa64925
Faulting module name: KERNELBASE.dll, version: 10.0.19041.1566, time stamp: 0x0833f2d4
Exception code: 0xe0434352
Fault offset: 0x0000000000034f69
Faulting process id: 0x46ac
Faulting application start time: 0x01d838b2f6587981
Faulting application path: C:\Users\Stuart Taylor\Downloads\NPVRSetup.exe
Faulting module path: C:\WINDOWS\System32\KERNELBASE.dll
Report Id: e91e7552-5648-49f6-876a-8ad841a78cd1
Faulting package full name:
Faulting package-relative application ID:

=================================

=================================
eventid 1001, windows error reporting

Fault bucket 1734385314327474004, type 5
Event Name: CLR20r3
Response: Not available
Cab Id: 0

Problem signature:
P1: NPVRSetup.exe
P2: 1.0.0.0
P3: dfa64925
P4: mscorlib
P5: 4.8.4470.0
P6: 61b72cb6
P7: 1694
P8: fd
P9: System.IO.DirectoryNotFound
P10:

Attached files:
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER21EE.tmp.mdmp
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER22AB.tmp.WERInternalMetadata.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER22CB.tmp.xml
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER22D9.tmp.csv
\\?\C:\ProgramData\Microsoft\Windows\WER\Temp\WER2309.tmp.txt

These files may be available here:
\\?\C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_NPVRSetup.exe_3afd1fc7c0659f9660bdc92b7c1bf37e4bee63c3_9826e96d_5361f745-0697-4b2a-8148-a5f4f20e8b91

Analysis symbol:
Rechecking for solution: 0
Report Id: e91e7552-5648-49f6-876a-8ad841a78cd1
Report Status: 268435456
Hashed bucket: 716f0f6ff7530c11e811c6411424af54
Cab Guid: 0

=================================

=================================
So most of the files it says are attached are gone, only the report.wer is left in the archive. It's attached because I'm over the character limit

Long Post...

Configuration:
Cable Provider: Fronti*r FIO* via fibre
  Link Type: ONT WAN
  Link Speed: 1000/Full Mbps
  Router Model: NVG468MQ
  Router Firmware: 9.3.0h7d91
Media Recording: NextPVR V4.2.5
PC Device name: ASUS-P8H67MLE (aka MediaPC)
  Processor: Intel® Core™ i5-2500K CPU @ 3.30GHz 
  RAM: 8.00 GB (7.73 GB usable)

Existing TV device: Ceton InfiniTV PCIe (IPV4 192.168.200.233) installed in a MediaPC PCIe slot with a cable provider supplied M-Card cablecard (many years
in use), which uses the Windows network stack to communicate with NextPVR.

New TV device: HDHomeRun Prime (IPV4 192.168.2.150) with M-Card cablecard from a disconnected cable provider set-top box.

HDHomeRun Prime device:
  Purchased: 3/11/2022
  Hardware Model: HDHR3-CC
  Firmware Version: 20220203
  DTCP-IP: DTCP 1.7-SD20200724
  WMDRM-NDT: WMDRM 10-SD20171110
  Memory Report: 64 MB SDRAM, 2 MB Flash

Situation:
- Old Ceton InfiniTV4 card has failed twice in the last two months to record properly.
- Need to replace the InfiniTV4. The new HDHomeRun 6 tuner is not available yet. Been waiting for a couple of years now. Promises...promises....
- Ordered a new (old?) HDHomeRun Prime from Amazon for a replacement.

My Workflow:
- Cable provider no longer requires a set-top box to be returned in my area.
- My set-top box was disconnected and removed from my billing last year.
- Reclaimed the M-Card cablecard and HDD from the old set-top box before sending the box to the recycler.
- Inserted the old set-top Arris/Motorolla M-card cablecard into the new HDHomeRun Prime device.
- Powered on HDHomeRun device
- Connected RG-58 TV cable
- Connected CAT-5 cable
- HDHomeRun device was using DHCP IPV4 address 192.168.2.146
- Set a static IPV4 address for the HDHomeRun device in the cable provider router to the last address of my DHCP range (192.168.2.150), since a static
  address could not be set in the HDHomeRun device.
- Via web browser, launched a channels scan on the HDHomeRun device and found 200+ unencrypted TV channels. Many were the same as my existing Ceton
  InfiniTV4. No encrypted channels were found.
- Contacted cable provider tech support to 'pair' the 'new' cablecard with the TV cable service, so I could receive encrypted TV channels.
  - The tech attempted to 'pair' the old set-top cablecard to the new HDHomeRunPrime  device using the info I obtained from the cablecard. The tech could not
    confirm that the pairing was accepted. The tech suspected the old cablecard was still 'married' to the old set-top box and could not be separated for
    reuse.
  - After the attempted pairing, I did not see any changes in the cablecard hardware settings as compared to before or as compared to the existing
    Ceton InFiniTV4 cablecard. I was looking for a change in the 'Conditional Access' 'Val' field from a '0x01' to a '0X04' as per the Ceton InfiniTV4
    pairing, but there was no change. I was also looking for a change in the 'Card Validation' field, but no joy there either.
  - The tech recommended obtaining another cablecard from customer service.
- Transferred from cable provider tech support to off-shore customer service agent, who denied my request for a second cablecard, saying only one was
  allowed.
  - While on the phone escalating with customer service, and re-scanning the cablecard channels, encrypted channels were now displayed in the HDHomeRun
    channels list.
- Apparently the cablecard 'pairing' WAS successful.
- Disconnected the call to customer service.
- On the MediaPC,
  - Opened the NextPVR 'Settings>Device' tab and the HDHomeRun device was not shown.
  - Closed NextPVR
  - Installed the HDHomeRun 'hdhomerun_windows_20220303.exe' program without a reboot.
  - Opened NextPVR 'Settings>Device' tab and the HDHomeRun device and tuners now displayed.
    - Suspect the 'HDHomeRUN RECORD' Windows service that was installed by 'hdhomerun_windows_20220303.exe', now allows the HDHomeRun device to be
      visible to NextPVR.
  - On the NextPVR 'Settings>Device' tab, the HDHomeRun Prime displays as device type 'HDRI' device name 'DVR-2650/HDHR Prime 13249C5F-x' with 3 tuners and      the existing Ceton InfiniTv4 device type is 'DRI' device name 'Ceton InfiniTV PCIe (00-80-5a-f0) Tuner-x' with 4 tuners.
- Logged into Schedules Direct and changed my EPG program guide channels subscription to agree with the HDHomeRun channels list for downloading during
  the next EPG update by NextPVR. 
- Note, my NextPVR was already configured to download the EPG from Schedules Direct for the Ceton InfiniTV4 device using my Schedules Direct credentials.
- On the Media PC,
  - Opened the NextPVR 'Settings>Device' tab, selected the HDHomeRun device, 'Device Setup', and 'Scan'.
  - 290 channels were found on the first HDHomeRun tuner (some encrypted and some non-encrypted).
  - Selected each 'empty' (no channels) HDHomeRun tuner and allowed NextPVR to copy over the channels from the 'prior' tuner.
  - On the NextPVR 'Settings>Channels' tab, noticed that the channels were mostly the same as my cable provider TV subscription and as the existing
    Ceton Infinity4 tuner channels scan.
  - Selected each new channel and set the EPG source to 'Schedules Direct'.
  - After 50+ or so channels updates, clicked 'OK' to save the channels settings. If not, eventually NextPVR seems to hang with too many updates.
  - Open NextPVR again and updated each channel's EPG selection until they are all complete.
  - When all the EPG settings were complete, launched the 'Update EPG' function.
  - The EPG updated and the PC did not reboot.
    - My NextPVR 'PostUpdateEPG.bat' is configured to automatically run after an EPG update and reboot the PC unless NextPVR is recording or there is
      an active defrag. I have the NextPVR update at 4:00AM, since the Ceton InfiniTV4 card periodically acts up if it is not rebooted after an EPG update.
      The Ceton InfiniTV4 is quite old, so I nurse it along.
  - Clicked 'OK' to save the channels settings.
  - Closed NextPVR settings.
- Opened NextPVR TV Guide:
  - Verified the Guide displayed the correct channel names and program names.
  - Verified the new encrypted TV channels could be 'watched'. Joy...
  - Set a few new NextPVR recordings for the new encrypted channels and verified they recorded in the correct NextPVR 'Recording Directories'.

Your mileage may vary.

This could only have been done with the assistance of other forums posts. Thank you all.

Enjoy...

Occasionally I watch an external recording thru the Videos menu in NextPVR. It would be nice to have an option to delete the recording from that feature.
Art

I have had this issue starting with Kodi 19.3 on a Firestick, I am not able to pause, rewind and fast forward live TV. Recordings are working as expected. Today I upgraded to NextPVR Version: 5.2.6.220206 and Kodi 19.4 and I am still having the same issue. I did not see this issue posted on any of the forums.

Thanks,

Mike