Audio Gaps?

[mpking]

I've noticed since I've rebuilt my machine that I some times get audio gaps in playback.. Randomly, every recording has at least 1, sometimes as many as 10, gaps in the sound.
The video will look fine, and the sound will come back.

Unfortunently, I've had a lot of things changed in my setup.

Currently:
C2D P8400 processor, 4Gigs ram, Vista Home Premium, MVP with mvpmc dongle, stock install of GBPVR, 7200RPM HD SATA

Config is:
All renders and Decoders are set to "System Default"
PVRX2 Video Renderer is set to EVR (not sure if this affects MVP or not) I have not intentionally installed any decoders on system.

I have NOT tried rewinding during playback to see if the gap is in the file on a specific point (if the gap doesn't move), or if it's playback thing (if the gap moves), or seen if the gap exists on playback on my PC. (Yes I know I should do these things)

I'll post back with the results of those tests.

In the meantime, I've got a lot of different variables. New system, new Dongle (Loving the mvpmc so far, it's MUCH faster than the Haup dongle) new codecs. I was hoping someone might have a specific area to look at.

[mpking]

Ok. So I've completed the tests:

Audio gap exists on the MVP (usually 2-3 seconds)
Rewind on MVP, Audio gap remains
Fire it up on GBPVR, and Audio gap remains in same spot.

So, What can I do next to diagnose this? Based on the above tests, I've effectivly elminated the MVP part of the problem.

What would cause an Audio gap during a recording?

(Re-reading my intial posts, I forgot to include I'm using the Hauppauge 500 MCE, driver version 2.0.48.25037 dated 2/6/2007. I've also put the timeline reg fix in. )