Having trouble with Adaptec VideOh PCI

[mryarbles]

I'm having problems getting any output. Everytime i click on the "live tv" button i get a crash in the "debug assertion failed"
..dbgdel.cpp
"_BLOCK_TYPE_IS_VALID(phead -> nBlockUse)"

I'm trying to use an Adaptec VideOh pci card.


When i running the tuning assistant the card is in the list...but it tells me "failed to find crossbar filter. Wrong device type?"

Anyone know if I can use this card, or what the problem might be?

Thanks

[sub]

Only the VideOh USB version works. The PCI version is not supported. Sorry.

[Rasihasi]

hi sub,

the videoh pci version works with gbpvr, see my posting:

http://gbpvr.com/cgi-bin....;t=3634

i have record over 30 movies with this configuration since
november last year (but never watch live tv).

cu,

rasihasi

[Rasihasi]

hi mryarbles, hi sub

here is my configuration.
I use the release 0.22.7 of gbpvr, installed on W2k prof. with SP4, 128 MB RAM, PIII@500, 60 GB HDD.The zipped attachement contains the CONFIG.XML, the DIRECT.INI an three pictures with configuration details.
In the DIRECT.INI i have changed the this section:

----------- snip --------------
[SETUP-Medium Quality]
VideoResolution=0
BitRate=4000
AudioSampleRate=1
AudioCompression=11
----------- snap ------------------

and

----------- snip -------------------
[Adaptec VideOh]
FILTER_CROSSBAR=Adaptec PCI Crossbar
FILTER_CAPTURE=Adaptec PCI Capture Device
FILTER_TV_TUNER=Adaptec PCI TvTuner
FILTER_TV_AUDIO=Adaptec PCI TvAudio
PIN_CROSSBAR_VIDEO_TUNER_IN=Video Tuner In
PIN_TVTUNER_ANALOG_VIDEO_OUT=Analog Video
PIN_TVTUNER_ANALOG_AUDIO_OUT=Analog Audio
PIN_TVAUDIO_TV_AUDIO_IN=TVAudio In
PIN_TVAUDIO_TV_AUDIO_OUT=TVAudio Out
PIN_CROSSBAR_AUDIO_TUNER_IN=Audio Tuner In
PIN_CROSSBAR_VIDEO_DECODER_OUT=Video Decoder Out
PIN_CAPTURE_ANALOG_VIDEO_IN=Analog Video In
PIN_CROSSBAR_AUDIO_DECODER_OUT=Audio Decoder Out
PIN_CAPTURE_ANALOG_AUDIO_IN=Analog Audio In
PIN_CAPTURE_CAPTURE_OUT=Capture
PIN_WRITER_INPUT_IN=Input
------------- snap ------------------------------------

In the CONFIG.XML i changed the this:

------- snip ------------------------
<PVR350Width>768</PVR350Width>
<PVR350Height>576</PVR350Height>
<PVR350OffsetX>0</PVR350OffsetX>
<PVR350OffsetY>0</PVR350OffsetY>
-------------- snap -------------------

Good luck!

Rasihasi


i'm sorry, my english isn't real well, i know :-)