Live TV but no Recording

[ltkafee]

I just manually added a digital HD channel that wasn't being found on full scan (though my HDTV finds it no problem), and I can watch it live but recording from this channel fail.

Here's my setup:

GBPVR v1.3.7
Hauppauge HVR 1800-MCE
WinXP SP3

I added the channel based on the digital channel number from SiliconDust's website:

http://www.silicondust.com/hdhomerun/location_programs

I then grabbed a Full TS stream and used TS Reader Lite to get the appropriate program #, Video, Audio, PMT & PCR numbers. My tuning entry is as follows (I made up the N component based on the structure used by other channels - could this be the critical part? Seemed unlikely ...):

T:93,0,0~P:8~V:49~A:52~PMT:48~PCR:49~N:>8.1 WROC-HD* (000(AC3))

I can load up PVR and watch this channel in all it's HD glory, but when I try to record back in TS Mux mode, the size stays at zero and the recording fails. Recording in Full TS is fine, and I'm able to watch in full HD using VLC by switching to program # 8. I tried re-registering the filters after seeing this suggestion elsewhere in the forums, but to no avail.

Attached are the zipped logs - I restarted the recording service, tried to record off of this channel (93-8) [it seemed to try twice, as I had two files with 0 bytes, the second labeled '-1']. I then recorded successfully off another channel in the same freq (93-10). All of that should be in the attached logs.

Any suggestions would be appreciated. Thanks!

-adam

[sub]

Based on the symptoms, it makes me think you've entered the wrong program number or PMT.

[ltkafee]

Thanks for taking a look at it sub.

I thought that might have been the case as well, so I played around with different numbers. Whenever I change either the program # & PMT though I lose the ability to play the channel live (and still no recording).

Also, TS Reader tells me the PMT PID is 0x00a0 (48) and is Program 8 (attached screen-shot in .zip), and when playing the Full TS back in VLC I'm given the choice of Program # 8 or 10 (another working channel).

I tried the latest release (1.3.11) today with no change.

[ltkafee]

Sub, seems that I was duplicating the same issue that Bill mentioned in his posts (http://forums.nextpvr.com/showthread.php...post337529) - sorry about that. I'll move my replies there.

Thanks,

-adam