DVB-T scanning issue - found all but 1 (ABC) TV Network

[bfg100k]

I'm having issues with NextPVR finding the ABC channels in Sydney. TVheadend found them with no issues. I've tried setting <ScanDropTime> in config.xml to 10000 (default is 3000) but I don't think the app is actually using that setting as when I performed the scan, I see the line >>> Scanning 226500000 (the ABC frequency) changing in less than 10 seconds (around 3?)

Below is the console output when I run the scan manually. There appears to be a lock on the 226.5MHz but no stations found?

Code:

2026-08-28 13:56:03:479 [DEBUG] Adapter::Adapter() 2026-08-28 13:56:03:479 [DEBUG] Scanning from /usr/share/dvb/dvb-t/au-Sydney 2026-08-28 13:56:03:479 [DEBUG] Channel config will be saved to /config/adapter0--channels-scan.conf 2026-08-28 13:56:03:505 [DEBUG] >>> Scanning@next 2026-08-28 13:56:03:505 [DEBUG] >>> Scanning 226500000        (0x00) Signal= -118.91dBm         Lock   (0x1b) Quality= Good Signal= -89.57dBm C/N= 6.41dB UCB= 0 postBER= 221x10^-6 PER= 0 2026-08-28 13:56:06:152 [DEBUG] >>> Scanning@continue3 2026-08-28 13:56:06:152 [DEBUG] >>> Scanning@next 2026-08-28 13:56:06:152 [DEBUG] >>> Scanning 177500000        (0x00) Quality= Good Signal= -89.72dBm C/N= 6.41dB UCB= 0 postBER= 21.0x10^-3 PER= 0         Lock   (0x1f) Quality= Poor Signal= -58.03dBm C/N= 20.38dB UCB= 20 postBER= 21.0x10^-3 PER= 10.8x10^-3 2026-08-28 13:56:09:203 [DEBUG] >>> Scanning@about to store 2026-08-28 13:56:09:203 [DEBUG] header 1282 2026-08-28 13:56:09:204 [DEBUG] ~1312:1282:4115~7 Sydney~Seven Network~25~177500000OFF~7 2026-08-28 13:56:09:204 [DEBUG] ~1313:1282:4115~7 Sydney~Seven Network~25~177500000OFF~71 2026-08-28 13:56:09:204 [DEBUG] ~1314:1282:4115~7two Sydney~Seven Network~25~177500000OFF~72 2026-08-28 13:56:09:204 [DEBUG] ~1316:1282:4115~7 Sydney~Seven Network~25~177500000OFF~70 2026-08-28 13:56:09:204 [DEBUG] ~1317:1282:4115~7flix Sydney~Seven Network~22~177500000OFF~76 2026-08-28 13:56:09:205 [DEBUG] ~1318:1282:4115~7Bravo Sydney~Seven Network~25~177500000OFF~75 2026-08-28 13:56:09:205 [DEBUG] ~1319:1282:4115~7mate Sydney~Seven Network~25~177500000OFF~74 2026-08-28 13:56:09:205 [DEBUG] ~1320:1282:4115~RACING.COM~Seven Network~22~177500000OFF~78 2026-08-28 13:56:09:205 [DEBUG] ~1321:1282:4115~TVSN~Seven Network~22~177500000OFF~77 2026-08-28 13:56:09:205 [DEBUG] >>> Scanning@stored 2026-08-28 13:56:09:205 [DEBUG] >>> Scanning@about to free loop 2026-08-28 13:56:09:205 [DEBUG] >>> Scanning@about to start next loop (63a81da0) 2026-08-28 13:56:09:205 [DEBUG] >>> Scanning@next 2026-08-28 13:56:09:205 [DEBUG] >>> Scanning 191625000 Lock   (0x1f) Quality= Poor Signal= -50.42dBm C/N= 22.16dB UCB= 18 postBER= 6.99x10^-3 PER= 3.50x10^15 2026-08-28 13:56:12:830 [DEBUG] >>> Scanning@about to store 2026-08-28 13:56:12:830 [DEBUG] header 1056 2026-08-28 13:56:12:830 [DEBUG] ~1057:1056:4114~Channel 9 Sydney~Nine Network Australia~1~191625000OFF~9 2026-08-28 13:56:12:830 [DEBUG] ~1058:1056:4114~9HD Sydney~Nine Network Australia~25~191625000OFF~90 2026-08-28 13:56:12:830 [DEBUG] ~1059:1056:4114~9Go! Sydney~Nine Network Australia~1~191625000OFF~93 2026-08-28 13:56:12:830 [DEBUG] ~1060:1056:4114~9Life Sydney~Nine Network Australia~1~191625000OFF~94 2026-08-28 13:56:12:830 [DEBUG] ~1061:1056:4114~9GemHD Sydney~Nine Network Australia~25~191625000OFF~95 2026-08-28 13:56:12:830 [DEBUG] ~1062:1056:4114~Channel 9 Sydney~Nine Network Australia~1~191625000OFF~91 2026-08-28 13:56:12:831 [DEBUG] ~1063:1056:4114~9Gem Sydney~Nine Network Australia~1~191625000OFF~92 2026-08-28 13:56:12:831 [DEBUG] ~1064:1056:4114~9Go!HD Sydney~Nine Network Australia~25~191625000OFF~99 2026-08-28 13:56:12:831 [DEBUG] ~1065:1056:4114~9Rush Sydney~Nine Network Australia~1~191625000OFF~96 2026-08-28 13:56:12:831 [DEBUG] ~1066:1056:4114~Extra~Nine Network Australia~1~191625000OFF~97 2026-08-28 13:56:12:831 [DEBUG] >>> Scanning@stored 2026-08-28 13:56:12:831 [DEBUG] >>> Scanning@about to free loop 2026-08-28 13:56:12:831 [DEBUG] >>> Scanning@about to start next loop (63a832f0) 2026-08-28 13:56:12:831 [DEBUG] >>> Scanning@next 2026-08-28 13:56:12:831 [DEBUG] >>> Scanning 219500000 Lock   (0x1f) Quality= Poor Signal= -67.50dBm C/N= 19.07dB UCB= 16 postBER= 5.24x10^-3 PER= 3.69x10^15 2026-08-28 13:56:20:682 [DEBUG] >>> Scanning@about to store 2026-08-28 13:56:20:683 [DEBUG] header 1538 2026-08-28 13:56:20:683 [DEBUG] ~1569:1538:4116~10 HD~TEN Sydney~25~219500000OFF~10 2026-08-28 13:56:20:683 [DEBUG] ~1570:1538:4116~10 HD +1~TEN Sydney~25~219500000OFF~14 2026-08-28 13:56:20:683 [DEBUG] ~1571:1538:4116~Nickelodeon~TEN Sydney~22~219500000OFF~13 2026-08-28 13:56:20:683 [DEBUG] ~1572:1538:4116~10 HD~TEN Sydney~25~219500000OFF~15 2026-08-28 13:56:20:683 [DEBUG] ~1573:1538:4116~10~TEN Sydney~1~219500000OFF~1 2026-08-28 13:56:20:683 [DEBUG] ~1574:1538:4116~you.tv~TEN Sydney~22~219500000OFF~16 2026-08-28 13:56:20:683 [DEBUG] ~1575:1538:4116~10 drama~TEN Sydney~25~219500000OFF~12 2026-08-28 13:56:20:683 [DEBUG] ~1576:1538:4116~10 comedy~TEN Sydney~25~219500000OFF~11 2026-08-28 13:56:20:684 [DEBUG] ~1577:1538:4116~gecko~TEN Sydney~22~219500000OFF~17 2026-08-28 13:56:20:684 [DEBUG] >>> Scanning@stored 2026-08-28 13:56:20:684 [DEBUG] >>> Scanning@about to free loop 2026-08-28 13:56:20:684 [DEBUG] >>> Scanning@about to start next loop (63a84840) 2026-08-28 13:56:20:684 [DEBUG] >>> Scanning@next 2026-08-28 13:56:20:684 [DEBUG] >>> Scanning 184500000        (0x00) Quality= Poor Signal= -67.71dBm C/N= 19.98dB UCB= 4294967280 postBER= 1.01x10^-6 PER= 544x10^3         Sync   (0x0f) Signal= -50.49dBm         Lock   (0x1f) Quality= Poor Signal= -50.49dBm C/N= 22.04dB UCB= 0 postBER= 21.0x10^-3 PER= 10.6x10^15 2026-08-28 13:56:27:281 [DEBUG] >>> Scanning@about to store 2026-08-28 13:56:27:281 [DEBUG] header 768 2026-08-28 13:56:27:281 [DEBUG] ~769:768:12802~SBS ONE~SBS~1~184500000OFF~3 2026-08-28 13:56:27:281 [DEBUG] ~771:768:12802~SBS2~SBS~25~184500000OFF~31 2026-08-28 13:56:27:281 [DEBUG] ~772:768:12802~SBS Food~SBS~1~184500000OFF~33 2026-08-28 13:56:27:281 [DEBUG] ~773:768:12802~NITV~SBS~1~184500000OFF~36 2026-08-28 13:56:27:281 [DEBUG] ~774:768:12802~SBS ONE HD~SBS~25~184500000OFF~30 2026-08-28 13:56:27:281 [DEBUG] ~775:768:12802~SBS World Movies~SBS~25~184500000OFF~32 2026-08-28 13:56:27:281 [DEBUG] ~776:768:12802~SBS WorldWatch~SBS~1~184500000OFF~35 2026-08-28 13:56:27:281 [DEBUG] ~777:768:12802~NITV HD~SBS~25~184500000OFF~34 2026-08-28 13:56:27:281 [DEBUG] ~785:768:12802~SBS Radio 1~SBS~2~184500000OFF~301 2026-08-28 13:56:27:281 [DEBUG] ~786:768:12802~SBS Radio 2~SBS~2~184500000OFF~302 2026-08-28 13:56:27:281 [DEBUG] ~787:768:12802~SBS Radio 3~SBS~2~184500000OFF~303 2026-08-28 13:56:27:281 [DEBUG] ~788:768:12802~SBS Arabic~SBS~2~184500000OFF~304 2026-08-28 13:56:27:281 [DEBUG] ~789:768:12802~SBS South Asian~SBS~2~184500000OFF~305 2026-08-28 13:56:27:281 [DEBUG] ~790:768:12802~SBS Chill~SBS~2~184500000OFF~306 2026-08-28 13:56:27:282 [DEBUG] ~791:768:12802~SBS PopAsia~SBS~2~184500000OFF~307 2026-08-28 13:56:27:282 [DEBUG] >>> Scanning@stored 2026-08-28 13:56:27:282 [DEBUG] >>> Scanning@about to free loop 2026-08-28 13:56:27:282 [DEBUG] >>> Scanning@about to start next loop (63a85d90) 2026-08-28 13:56:27:282 [DEBUG] >>> Scanning@next 2026-08-28 13:56:27:282 [DEBUG] >>> Scanning 536625000        (0x00) Quality= Good Signal= -50.56dBm C/N= 23.39dB UCB= 0 postBER= 0 PER= 0         RF     (0x01) Signal= -119.78dBm 2026-08-28 13:56:39:806 [DEBUG] >>> Scanning@continue3