AMD Athlon 2200+XP problems running at full speed

[jksmurf]

Is anyone running the PVR-150 on a FSB > 100 (or 133)?

Acegolfer seems to have success with @137 with a different TVcard.

Does anyone know what bus speed the PVR-150 PCI Card is actually designed for?

The reason I ask is I am running an old ASUS TUSL2-C board which is working fine (I only ever watch TV over the MVP in any case) but at some stage I "need" (.. you listening sweetie ...?) to upgrade to a faster PC and want to make sure I can just plonk the PVR150 in it and not worry about the system being too fast for it (who would ever have thought that a few years ago ...!)

k.

[gEd]

Does anyone know what bus speed the PVR-150 PCI Card is actually designed for?

moving your 150 to another pc will not be a problem.

A PCI card is designed to run in a PCI slot which runs at 33Mhz. Unless a motherboard has a PCI lock, the PCI bus speed is based on the FSB / "the divider", which at 100Mhz, should be 3. When the FSB is increased to 133, the mobo *should* increase the divider to 4.

The fact that dinki appears to have his board working by dropping to 124/124 suggests cpu / mem / voltage problems when running at 133. e.g. the mem is PC100 not 133 or the vcore or vdimm needed to be increased a tad to run at 133.