Supporting the OnAir USB HDTV GT - Issues

[Fatawan]

The AC3 Filter software worked for me as well. Thanks Sub.

[Fatawan]

TIP: If you are doing an initial install of both an analog tuner and a digital tuner, and using Zap2it for EPG, you will end up with both analog and digital stations enabled under your analog tuner. That will make digital stations unavailable under LiveTV. SO, disable all the digital stations under your analog tuners(config>capture sources>"your analog tuner">edit), map your digital channels for the OnAir, and you should be good to go.

[fiteclub]

Sub

Does GBPVR support the OnAir Creator HD capture card which does have a hardware encoder for analog signals? If so, is unencrypted QAM available as with the GT model?

[sub]

I dont really know much about the OnAir devices. I think QAM is only available via their GT model.

[SniperDude]

Well I know what part of my Christmas entails.. I am getting the OnAir HDTV USB GT Device!!
cant wait to see if it works flawlessly with my Comcast cable, and GBPVR!!

[sjpvr]

I just installed the OnAir GT with the latest drivers and GBPVR. Unfortunately, the OnAir software is able to find FoxHD and CBSHD, but the channel scan for GBPVR isn't. Is there something I need to change so that the GBPVR software finds all the channels that the OnAir software does?

[sub]

Zip and attach the config.exe.log and config.exe-native.log after a scan and I'll take a look.

[sjpvr]

The OnAir scan found 2 channels in the 78 range (my local Fox and CBS). GBPVR doesn't find any until the 79 range. Attached are the logs as requested.

Thanks.

[sjpvr]

I still can't get the scan to see 2 channels that the OnAir software picks up. Is there someway to get the config info from the OnAir software and manually enter it into GBPVR?

Thanks.

[sub]

The OnAir scan found 2 channels in the 78 range (my local Fox and CBS). GBPVR doesn't find any until the 79 range. Attached are the logs as requested.

Thanks.

Try editing "C:\Program Files\devnz\gbpvr\BDA\ATSC\qam.ini". The default QAM scanning only starts at channel 79. You'd need to edit the "0" if you add additional entires plus the "62=xxx,0,0" etc. "0" represents the count of the following enties.