New DVD2MPEG and Video Archiver Plugins

[Guest]

Try downloading the latest version from http://www.bladerhq.com/pmwiki/pmwiki.ph...n/DVD2MPEG. The one on the main GBPVR site is old. The plug-in now uses the standard config.exe program to set its defaults. If it doesn't seem to work, look in DVD2MPEG.log. It should tell you what is going wrong. The plug-in handles most erros, but gives no feedback other than to write in the log. If you have problems, you can email me the log.

Jeff

[Guest]

Quote[/b] (Guest @ Dec. 25 2004,11:38)]Try downloading the latest version from http://www.bladerhq.com/pmwiki/pmwiki.ph...n/DVD2MPEG. The one on the main GBPVR site is old. The plug-in now uses the standard config.exe program to set its defaults. If it doesn't seem to work, look in DVD2MPEG.log. It should tell you what is going

Thanks Jeff, I'll give it a bash.

Merry Christmas to all !!!

Robert Czernkowski

[Guest]

Quote[/b] (Guest @ Dec. 25 2004,11:38)]Try downloading the latest version from http://www.bladerhq.com/pmwiki/pmwiki.ph...n/DVD2MPEG. The one on the main GBPVR site is old. The plug-in now uses the standard config.exe program to set its defaults. If it doesn't seem to work, look in DVD2MPEG.log. It should tell you what is going

Jeff,
I installed the new version of DVD2MPEG, and get exactly the same problems. Here is the my DVD2MPEG.log:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">
26/12/2004 11:28:46 PM: GBPVRRootDir is C:\Program Files\devnz\gbpvr\

26/12/2004 11:28:46 PM: Found RootSkinDirectory skin\

26/12/2004 11:28:46 PM: Found ActiveSkin Blue\

26/12/2004 11:28:46 PM: Looking for configuration information in C:\Program Files\devnz\gbpvr\skin\Blue\dvd2mpeg\skin.xml

26/12/2004 11:28:46 PM: Looking for configuration information in C:\Program Files\devnz\gbpvr\skin\Blue\dvd2mpeg\skin.xml

26/12/2004 11:28:46 PM: After load of C:\Program Files\devnz\gbpvr\skin\Blue\dvd2mpeg\skin.xml

26/12/2004 11:28:46 PM: Trying to read MyButton settings...

26/12/2004 11:28:46 PM: Set myButtonName to: DVD to MPEG

26/12/2004 11:28:46 PM: Trying to read MyPanel settings...

26/12/2004 11:28:46 PM: Set myPanelName to default: DVDtoMPEGPanel

26/12/2004 11:29:26 PM: In activate.

26/12/2004 11:29:27 PM: Initializing element TaskBox

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read radius

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element BaseDirBox

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read radius

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element BaseDirText

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element InstructionText

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element DVDInDriveText

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element DVDDirText

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Read size

26/12/2004 11:29:27 PM: Initializing element LeftArrow

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Initializing element RightArrow

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Initializing element RipButton

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Initializing element CancelButton

26/12/2004 11:29:27 PM: Read location

26/12/2004 11:29:27 PM: Set DVDDecrypterPath to: \

26/12/2004 11:29:27 PM: Set BesweetPath to: \

26/12/2004 11:29:27 PM: Set mplexPath to: \

26/12/2004 11:29:27 PM: Set DVDPath to: \

26/12/2004 11:29:27 PM: Set tempDir to: \

26/12/2004 11:29:27 PM: Set audioStreamIdentifier to: 0x80

26/12/2004 11:29:27 PM: Set decryptCommandLine to: /MODE IFO /SRC {dvdDrive} /VTS 1 /DEMUX 0xE0 0x80 0xA0 /DEST "{tempDir}" /SPLIT NONE /START /OVERWRITE YES /CLOSE

26/12/2004 11:29:27 PM: Set besweetCommandLine to: -core( -input "{tempDir}audio.ac3" -output "{tempDir}audio.mp2" -logfilea "{tempDir}BeSweet.log" ) -ota( -d {delayTime} ) -azid( -c normal -g 0.95 -L -3db ) -toolame( -m s -b 192 -e )

26/12/2004 11:29:27 PM: Set besweetPCMCommandLine to: -core( -input "{tempDir}audio.ac3" -output "{tempDir}audio.mp2" -logfilea "{tempDir}BeSweet.log" ) -ota( -d {delayTime} ) -azid( -c normal -g 0.95 -L -3db ) -toolame( -m s -b 192 -e )

26/12/2004 11:29:27 PM: Set mplexCommandLine to: -f 8 -o "{outputfile}" "{tempDir}audio.mp2" "{tempDir}video.m2v"

26/12/2004 11:29:27 PM: Set skipCleanUp to true

26/12/2004 11:29:27 PM: Running on PC client

26/12/2004 11:29:27 PM: Setup volume inserted &amp; removed event handlers

26/12/2004 11:29:27 PM: Result of FindDriveWithDVD is: E:\

26/12/2004 11:29:27 PM: Getting volume name from: E:\

26/12/2004 11:29:27 PM: Name is: Wallaceandgromit

26/12/2004 11:29:27 PM: Activate done.

26/12/2004 11:29:35 PM: In DecryptStep

26/12/2004 11:29:35 PM: Start Process: path is: \

26/12/2004 11:29:35 PM: Start Process: filename is: DVDDecrypter.exe

26/12/2004 11:29:35 PM: Start Process: args are: /MODE IFO /SRC E:\ /VTS 1 /DEMUX 0xE0 0x80 0xA0 /DEST "\" /SPLIT NONE /START /OVERWRITE YES /CLOSE

26/12/2004 11:29:35 PM: Current rip state is Idle

26/12/2004 11:29:35 PM: DVDDecrypter.exe is not located in \. Please update the configuration information for this plug-in.

[/QUOTE]

[Guest]

HI Robert,

Your going to hate this idea,

I have a few PC's that I play with, and have seen a few features with GBPVR and plug in's when I've added / removed things over a few versions.

It could be the good old, to many combinations for every one to try.

So, the answer I end up with, is

the good old, un install, re boot, and re install, just with the dvd2mpeg plug in , see if that works.

I know, it's life ..

[Jeff]

Can you cheeck your config.xml file in the main GBPVR directory. it should have entries that look something like this:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">
<DVD2MPEGPlugin>
<DVDDecrypterPath>C:\Program Files\DVDDecrypter\</DVDDecrypterPath>
<DVDPath>C:\dvd</DVDPath>
<BesweetPath>C:\Program Files\DVD Tools\</BesweetPath>
<mplexPath>C:\Program Files\DVD Tools\</mplexPath>
<tempDir>C:\Temp\</tempDir>
<AudioStreamIdentifier>0x80</AudioStreamIdentifier>
<DecryptCommandLine>/MODE IFO /SRC {dvdDrive} /VTS 1 /DEMUX 0xE0 0x80 0xA0 /DEST "{tempDir}" /SPLIT NONE /START /OVERWRITE YES /CLOSE</DecryptCommandLine>
<BeSweetPCMCommandLine>-core( -input "{inputfile}" -output "{tempDir}audio.mp2" -logfilea "{tempDir}BeSweet.log" ) ota( -d auto ) -mp2enc( -m s -b 192 -e )</BeSweetPCMCommandLine>
<BeSweetCommandLine>-core( -input "{tempDir}audio.ac3" -output "{tempDir}audio.mp2" -logfilea "{tempDir}BeSweet.log" ) -ota( -d {delayTime} ) -azid( -c normal -g 0.95 -L -3db ) -toolame( -m s -b 192 -e )</BeSweetCommandLine>
<MplexCommandLine>-f 8 -o "{outputfile}" "{tempDir}audio.mp2" "{tempDir}video.m2v"</MplexCommandLine>
<SkipCleanUp>False</SkipCleanUp>
<PanelShowRecordingStatus>True</PanelShowRecordingStatus>
<PanelPendingLeadTime>12</PanelPendingLeadTime>
<PanelDateFormat>9</PanelDateFormat>
</DVD2MPEGPlugin>
[/QUOTE]

The DVDDecrypterPath etc. entries are where the plug-in pulls the path names from. If these entries are blank (or do not exist) then the plug-in won't work. The released version of the plug-in would turn blank path names into &quot;\&quot;. The next verison of the plug-in will catch this as an error.

You can (and need to if you have not) set the plug-in configuration information using the config.exe program.

Jeff

[Guest]

Quote[/b] (PVR(SWE) @ Dec. 13 2004,13:41)]Hi Jeff,
I have tryd your plugin whit the latest GBPVR + the latest besweet etc. And I still can't get it to work. At step 2 it stops after one secound. It gives me a log file from besweet put that dosen't give me any info why it has stoppt only witch filenames it will process. Do you know what I am doing wrong?

/Jonas

I have the exact same problem
BeSweet v1.5b29
Decrypter 3.5.1.0

[Guest]

I vaguely recall Jonas's problem being solved, but I don't recall how. Maybe Jonas will write back in and let us know if the problem was fixed and how.

Jeff

[jrockintuitive]

Are you taking suggestions for Video Archiver?

JRock

[Jeff]

Always!

[aegisx]

Great work Jeff, thanks!

What do you think about adding the getinfo programs to the postepg bat file?