2008-01-27, 10:36 AM
After I upgraded to 1.1.5 I do get a black screen after resuming from standby.
I run in VMR9 full screen
Killing pvrx2 (CTRL+ALT+DEL does pop up the task manager window) and restarting pvrx2 solves the problem
The pvrx2 native log shows some errors
[COLOR="Blue"]2008-01-27 11:21:00.000 VERBOSE SetRenderList updating texture
2008-01-27 11:21:00.000 VERBOSE About to update 16128 pixels
2008-01-27 11:21:19.265 INFO System is going to low power state...
--------> This is when the system goes to standby and wakes up again.
2008-01-27 11:23:40.500 VERBOSE SetRenderList updating texture
2008-01-27 11:23:40.500 VERBOSE About to update 16128 pixels
2008-01-27 11:23:40.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:40.500 VERBOSE device lost
2008-01-27 11:23:43.671 INFO System is waking from low power state...
2008-01-27 11:23:48.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:48.500 VERBOSE device lost
2008-01-27 11:23:48.500 VERBOSE not reset
2008-01-27 11:23:48.500 VERBOSE DeleteSurfaces
2008-01-27 11:23:48.500 VERBOSE CreateDevice() = 3
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX2)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY2)
2008-01-27 11:23:49.015 ERROR hr failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:49.015 ERROR CreateDevice() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top
2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top finished
2008-01-27 11:24:25.218 VERBOSE Allocator shutdown...
2008-01-27 11:24:25.218 VERBOSE texture cache now has 0 textures
2008-01-27 11:24:25.218 VERBOSE DeleteSurfaces
[/COLOR]
Detailed pvrx2 logs attached
Any suggestions?
I run in VMR9 full screen
Killing pvrx2 (CTRL+ALT+DEL does pop up the task manager window) and restarting pvrx2 solves the problem
The pvrx2 native log shows some errors
[COLOR="Blue"]2008-01-27 11:21:00.000 VERBOSE SetRenderList updating texture
2008-01-27 11:21:00.000 VERBOSE About to update 16128 pixels
2008-01-27 11:21:19.265 INFO System is going to low power state...
--------> This is when the system goes to standby and wakes up again.
2008-01-27 11:23:40.500 VERBOSE SetRenderList updating texture
2008-01-27 11:23:40.500 VERBOSE About to update 16128 pixels
2008-01-27 11:23:40.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:40.500 VERBOSE device lost
2008-01-27 11:23:43.671 INFO System is waking from low power state...
2008-01-27 11:23:48.500 VERBOSE m_pD3DDev->Present() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:48.500 VERBOSE device lost
2008-01-27 11:23:48.500 VERBOSE not reset
2008-01-27 11:23:48.500 VERBOSE DeleteSurfaces
2008-01-27 11:23:48.500 VERBOSE CreateDevice() = 3
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderX2)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY1)
2008-01-27 11:23:48.500 VERBOSE getSetting(OverScanBorderY2)
2008-01-27 11:23:49.015 ERROR hr failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:23:49.015 ERROR CreateDevice() failed
Error code : 88760868
D3DERR_DEVICELOST
Device lost
2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top
2008-01-27 11:24:25.218 VERBOSE DirectShowPlayerBase:top finished
2008-01-27 11:24:25.218 VERBOSE Allocator shutdown...
2008-01-27 11:24:25.218 VERBOSE texture cache now has 0 textures
2008-01-27 11:24:25.218 VERBOSE DeleteSurfaces
[/COLOR]
Detailed pvrx2 logs attached
Any suggestions?
P4 3GHz 1GB, 250GB, nVidia dualTV, GBPVR 1.3.11, XP
Support Comskip, visit the forum and donate at http://www.comskip.org/
Support Comskip, visit the forum and donate at http://www.comskip.org/