failed to scan ABC (atsc) channel

dumbledore · 2010-01-11, 12:23 AM

hi there, i'm seeing a strange issue on tuning to my local abc channel. i realize the signal quality isn't that great on my antenna, but it never shows up on the scan list (i've tried 2 different tuner cards - an ati tv wonder 650 pci and an ati tv wonder 600 usb, but neither showed the channel, even on a manual scan of the frequency. it does show some quality / signal strength numbers but no channel shows up.) i tried the usb tuner on my laptop and the missing channel was found, so i copied over the tuning line into my desktop's scan.cache file, and under the mapping config page i was able to see the channel in the preview window and map it to my EPG channel. but when i start up the app normally and go to the channel, all i get is a black screen...

here's the log of it trying to tune in to the channel:

Code:
2010-01-10 19:06:38.036    INFO    SetTuningRequest(T:38,0,0~P:3~TSID:2131~V:49~A:52~PMT:48~PCR:49~N:>7.1  WKBW-HD (eng(AC3)))

2010-01-10 19:06:38.036    VERBOSE    getSetting(BDAQuickPidSwitch)

2010-01-10 19:06:38.036    VERBOSE    getSetting(BDAMultiplexer)

2010-01-10 19:06:38.037    VERBOSE    SubmitTuningRequest(T:38,0,0~P:3~TSID:2131~V:49~A:52~PMT:48~PCR:49~N:>7.1  WKBW-HD (eng(AC3)))

2010-01-10 19:06:38.037    VERBOSE    getSetting(BDASubmitTuningRequestAlways)

2010-01-10 19:06:38.037    VERBOSE    BDASubmitTuningRequestAlways is true. Forcing...

2010-01-10 19:06:38.037    VERBOSE    Initializing ATSC tuning request.

2010-01-10 19:06:38.037    VERBOSE    Audio and Video PIDs known...

2010-01-10 19:06:38.037    VERBOSE    atsc@5

2010-01-10 19:06:38.048    VERBOSE    atsc@6.

2010-01-10 19:06:38.048    INFO    Tuning by physical channel number (38)

2010-01-10 19:06:38.048    VERBOSE    atsc@8

2010-01-10 19:06:38.048    VERBOSE    atsc@9

2010-01-10 19:06:38.048    VERBOSE    About to put ATSC/QAM tuning request

2010-01-10 19:06:38.457    INFO    Successfully put tuning request (hr = 00000000)

2010-01-10 19:06:38.457    INFO    currentChannel=38

2010-01-10 19:06:38.457    VERBOSE    ServiceID: 3,    PMT PID: 48,    VPID: 49,     APID: 52

2010-01-10 19:06:38.457    VERBOSE    SubmitTuningRequest() complete

2010-01-10 19:06:38.457    VERBOSE    getSetting(BDAQuickPidSwitch)

2010-01-10 19:06:38.457    VERBOSE    Doing quick PID switch

2010-01-10 19:06:38.457    VERBOSE    Mapping 'Video' to PID 49

2010-01-10 19:06:38.508    VERBOSE    Mapping 'Audio' to PID 52

2010-01-10 19:06:38.508    VERBOSE    Quick PID switch...no re-render required

2010-01-10 19:06:38.508    VERBOSE    Demux filter has the following default output pins:

2010-01-10 19:06:38.508    VERBOSE     - 001: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {B3C7397C-D303-414D-B33C-4ED2C9D29733}

2010-01-10 19:06:38.508    VERBOSE            PID: 0 (0)

2010-01-10 19:06:38.508    VERBOSE            PID: 8187 (1FFB)

2010-01-10 19:06:38.508    VERBOSE     - 002: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {C892E55B-252D-42B5-A316-D997E7A5D995}

2010-01-10 19:06:38.508    VERBOSE     - Audio: has media type: {73647561-0000-0010-8000-00AA00389B71} {E06D802C-DB46-11CF-B4D1-00805F6CBBEA}  (AUDIO)

2010-01-10 19:06:38.508    VERBOSE            PID: 52 (34)

2010-01-10 19:06:38.508    VERBOSE     - PSI: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {00000000-0000-0000-0000-000000000000}

2010-01-10 19:06:38.508    VERBOSE            PID: 0 (0)

2010-01-10 19:06:38.508    VERBOSE            PID: 16 (10)

2010-01-10 19:06:38.508    VERBOSE            PID: 17 (11)

2010-01-10 19:06:38.508    VERBOSE            PID: 18 (12)

2010-01-10 19:06:38.508    VERBOSE            PID: 80 (50)

2010-01-10 19:06:38.508    VERBOSE            PID: 8187 (1FFB)

2010-01-10 19:06:38.508    VERBOSE     - Video: has media type: {73646976-0000-0010-8000-00AA00389B71} {E06D8026-DB46-11CF-B4D1-00805F6CBBEA}  (VIDEO)

2010-01-10 19:06:38.508    VERBOSE            PID: 49 (31)

2010-01-10 19:06:38.508    VERBOSE    getSetting(ListGraphFilters)

2010-01-10 19:06:38.508    VERBOSE    Graph contains the following filters:

2010-01-10 19:06:38.508    VERBOSE     - Default DirectSound Device

2010-01-10 19:06:38.508    VERBOSE     - Video Renderer

2010-01-10 19:06:38.508    VERBOSE     - BDA MPEG2 Transport Information Filter

2010-01-10 19:06:38.508    VERBOSE     - GB-PVR PSI Parser

2010-01-10 19:06:38.508    VERBOSE     - ffdshow Audio Decoder

2010-01-10 19:06:38.508    VERBOSE     - Microsoft DTV-DVD Video Decoder

2010-01-10 19:06:38.508    VERBOSE     - GB-PVR Flow Status

2010-01-10 19:06:38.508    VERBOSE     - MPEG-2 Demultiplexer

2010-01-10 19:06:38.508    VERBOSE     - GB-PVR TS Mon

2010-01-10 19:06:38.508    VERBOSE     - ATI BDA Digital Capture

2010-01-10 19:06:38.508    VERBOSE     - ATI BDA Digital Tuner

2010-01-10 19:06:38.508    VERBOSE     - Microsoft Network Provider

2010-01-10 19:06:38.508    VERBOSE    getSetting(SaveGraphFiles)

2010-01-10 19:06:38.527    VERBOSE    locked=0    present=0     strength=36     quality=18

2010-01-10 19:06:38.527    VERBOSE    After IMediaControl->Run()

2010-01-10 19:06:38.528    VERBOSE    getSetting(BDAAutoMapPids)

2010-01-10 19:06:38.528    VERBOSE    Pin "5" mappings:

2010-01-10 19:06:38.528    INFO    SetTuningRequest() finished

2010-01-10 19:06:38.528    VERBOSE    Got sequence header...

00 00 01 B3 2C 01 E0 24 05 26 E3 81 10 11 11 12 

12 12 13 13 13 13 14 14 14 14 14 15 15 15 15 15 

15 16 16 16 16 16 16 16 17 17 17 17 17 17 17 17 

18 18 18 19 18 18 18 19 1A 1A 1A 1A 19 1B 1B 1B 

1B 1B 1C 1C 1C 1C 1E 1E 1E 1F 1F 21 00 00 01 B5 

14 82 00 01 00 00 

2010-01-10 19:06:38.528    VERBOSE    Sequence Header resolution is 704 x 480

2010-01-10 19:06:38.528    VERBOSE    Sequence Header aspect ratio: 4x3

2010-01-10 19:06:38.528    VERBOSE    Frame rate: 29.97

2010-01-10 19:06:38.528    VERBOSE    setSourceAspectRatio() using autoAspectRatio

2010-01-10 19:06:38.528    VERBOSE    video resolution is 704 x 528

2010-01-10 19:06:38.528    VERBOSE    source is 4:3

2010-01-10 19:06:38.528    VERBOSE    getSetting(HorizontalZoom)

2010-01-10 19:06:38.529    VERBOSE    getSetting(VerticalZoom)

2010-01-10 19:06:38.529    VERBOSE    setVideoWindowPos(0,0,0,0)

2010-01-10 19:06:38.529    VERBOSE    Checking if inset mode

2010-01-10 19:06:38.529    VERBOSE    not inset mode

2010-01-10 19:06:38.529    VERBOSE    getSetting(HorizontalZoom)

2010-01-10 19:06:38.529    VERBOSE    getSetting(VerticalZoom)

whurlston · (This post was last modified: 2010-01-11, 01:27 AM by whurlston.)

Assuming the strength and quality values are on a 0-100 scale, those reported values are way too low to tune a digital signal. Even a 0-50 scale they would be too low. Signal should be >80% for ATSC and > 90% for QAM and quality should be near 100% for both. What values do you other digital channels show?

Edit: It's not even registering a signal (present=0). Not sure why that would be since even a low signal should show as at least being present. I could be wrong on that though.

dumbledore · 2010-01-11, 03:56 AM

other channels quality values are in the 70-100 range. although it seems to me that since it shows up just fine in the preview mini window in the config app, it should also work in the main app O_o

whurlston · 2010-01-11, 04:40 AM

View the channel in the config window and zip and post your config.exe-native.log and config.exe.log file.

dumbledore · (This post was last modified: 2010-01-12, 10:14 AM by dumbledore.)

here's the relevant section from the config.exe.native log file:

Code:
2010-01-12 04:38:13.566    INFO    SetTuningRequest(T:38,0,0~P:3~TSID:2131~V:49~A:52~PMT:48~PCR:49~N:>7.1  WKBW-HD (eng(AC3)))

2010-01-12 04:38:13.566    VERBOSE    getSetting(BDAQuickPidSwitch)

2010-01-12 04:38:13.566    VERBOSE    getSetting(BDAMultiplexer)

2010-01-12 04:38:13.566    VERBOSE    SubmitTuningRequest(T:38,0,0~P:3~TSID:2131~V:49~A:52~PMT:48~PCR:49~N:>7.1  WKBW-HD (eng(AC3)))

2010-01-12 04:38:13.566    VERBOSE    getSetting(BDASubmitTuningRequestAlways)

2010-01-12 04:38:13.566    VERBOSE    BDASubmitTuningRequestAlways is true. Forcing...

2010-01-12 04:38:13.566    VERBOSE    Initializing ATSC tuning request.

2010-01-12 04:38:13.566    VERBOSE    Audio and Video PIDs known...

2010-01-12 04:38:13.566    VERBOSE    atsc@5

2010-01-12 04:38:13.574    VERBOSE    atsc@6.

2010-01-12 04:38:13.574    INFO    Tuning by physical channel number (38)

2010-01-12 04:38:13.574    VERBOSE    atsc@8

2010-01-12 04:38:13.574    VERBOSE    atsc@9

2010-01-12 04:38:13.574    VERBOSE    About to put ATSC/QAM tuning request

2010-01-12 04:38:14.079    INFO    Successfully put tuning request (hr = 00000000)

2010-01-12 04:38:14.080    INFO    currentChannel=38

2010-01-12 04:38:14.080    VERBOSE    ServiceID: 3,    PMT PID: 48,    VPID: 49,     APID: 52

2010-01-12 04:38:14.080    VERBOSE    SubmitTuningRequest() complete

2010-01-12 04:38:14.080    VERBOSE    getSetting(BDAQuickPidSwitch)

2010-01-12 04:38:14.080    VERBOSE    Doing quick PID switch

2010-01-12 04:38:14.083    VERBOSE    Mapping 'Video' to PID 49

2010-01-12 04:38:14.102    VERBOSE    Mapping 'Audio' to PID 52

2010-01-12 04:38:14.106    VERBOSE    Quick PID switch...no re-render required

2010-01-12 04:38:14.106    VERBOSE    Demux filter has the following default output pins:

2010-01-12 04:38:14.106    VERBOSE     - 001: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {B3C7397C-D303-414D-B33C-4ED2C9D29733}

2010-01-12 04:38:14.106    VERBOSE            PID: 0 (0)

2010-01-12 04:38:14.106    VERBOSE            PID: 8187 (1FFB)

2010-01-12 04:38:14.106    VERBOSE     - 002: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {C892E55B-252D-42B5-A316-D997E7A5D995}

2010-01-12 04:38:14.106    VERBOSE     - Audio: has media type: {73647561-0000-0010-8000-00AA00389B71} {E06D802C-DB46-11CF-B4D1-00805F6CBBEA}  (AUDIO)

2010-01-12 04:38:14.106    VERBOSE            PID: 52 (34)

2010-01-12 04:38:14.106    VERBOSE     - PSI: has media type: {455F176C-4B06-47CE-9AEF-8CAEF73DF7B5} {00000000-0000-0000-0000-000000000000}

2010-01-12 04:38:14.106    VERBOSE            PID: 0 (0)

2010-01-12 04:38:14.106    VERBOSE            PID: 16 (10)

2010-01-12 04:38:14.106    VERBOSE            PID: 17 (11)

2010-01-12 04:38:14.106    VERBOSE            PID: 18 (12)

2010-01-12 04:38:14.106    VERBOSE            PID: 48 (30)

2010-01-12 04:38:14.106    VERBOSE            PID: 64 (40)

2010-01-12 04:38:14.106    VERBOSE            PID: 8187 (1FFB)

2010-01-12 04:38:14.106    VERBOSE     - Video: has media type: {73646976-0000-0010-8000-00AA00389B71} {E06D8026-DB46-11CF-B4D1-00805F6CBBEA}  (VIDEO)

2010-01-12 04:38:14.106    VERBOSE            PID: 49 (31)

2010-01-12 04:38:14.106    VERBOSE    getSetting(ListGraphFilters)

2010-01-12 04:38:14.106    VERBOSE    Graph contains the following filters:

2010-01-12 04:38:14.106    VERBOSE     - Default DirectSound Device

2010-01-12 04:38:14.106    VERBOSE     - MPEG-2 Sections and Tables

2010-01-12 04:38:14.106    VERBOSE     - BDA MPEG2 Transport Information Filter

2010-01-12 04:38:14.106    VERBOSE     - GB-PVR PSI Parser

2010-01-12 04:38:14.106    VERBOSE     - VMR9

2010-01-12 04:38:14.106    VERBOSE     - Microsoft DTV-DVD Video Decoder

2010-01-12 04:38:14.106    VERBOSE     - ffdshow Audio Decoder

2010-01-12 04:38:14.106    VERBOSE     - GB-PVR Flow Status

2010-01-12 04:38:14.106    VERBOSE     - MPEG-2 Demultiplexer

2010-01-12 04:38:14.106    VERBOSE     - GB-PVR TS Mon

2010-01-12 04:38:14.106    VERBOSE     - ATI BDA Digital Capture

2010-01-12 04:38:14.106    VERBOSE     - ATI BDA Digital Tuner

2010-01-12 04:38:14.106    VERBOSE     - Microsoft Network Provider

2010-01-12 04:38:14.106    VERBOSE    getSetting(SaveGraphFiles)

2010-01-12 04:38:14.121    VERBOSE    locked=1    present=1     strength=36     quality=84

2010-01-12 04:38:14.121    VERBOSE    After IMediaControl->Run()

2010-01-12 04:38:14.121    VERBOSE    getSetting(BDAAutoMapPids)

2010-01-12 04:38:14.121    VERBOSE    Pin "5" mappings:

2010-01-12 04:38:14.121    INFO    SetTuningRequest() finished

strange, since here quality is over 80...
also something i'm seeing which may be related is that since i added the channel, pvrx2.exe randomly loses the signal for all channels... and then crashes when i restart it... i'll attach all my logs in a zip, maybe someone can figure out what's going wrong.

Possibly Related Threads…
Thread		Author	Replies	Views	Last Post
	DVB-C scan instantly come sup empty	Iskelderon	17	1,801	2024-03-08, 06:47 PM Last Post: sub
	US ATSC 3 FTC Comments wanted	Ranbato	3	1,034	2023-07-14, 06:13 PM Last Post: mvallevand
	Add Colossus as a Single Channel source	txinga	4	1,838	2022-01-04, 08:51 PM Last Post: txinga
	NextPVR on Raspberry Pi - Login Failed	PaulM	3	1,960	2021-10-04, 08:45 PM Last Post: mvallevand
	GSSBOX (SAT>IP) scan does not find any channels	Matthias	8	4,235	2020-08-06, 09:20 PM Last Post: sub
	Twinhan 3250 ATSC only one card works at a time	FM5	12	3,973	2020-07-27, 07:15 PM Last Post: sub
	Detected Digital ATSC tuner cannot find any channels after scan	dorthensensens	29	10,107	2020-07-25, 12:55 PM Last Post: dorthensensens
	HVR-2250 scan only finds 3 channels	baj1	17	6,522	2020-06-23, 04:53 AM Last Post: baj1
	HDHomeRun QUATRO 4K for ATSC 3.0	ElihuRozen	1	1,941	2020-04-23, 03:17 AM Last Post: pcostanza
	Improve reliability of STB channel changing?	jksmurf	39	13,944	2019-09-29, 07:07 AM Last Post: jksmurf