Terratec Cinergy C HD - Can't find all channels!

[weasel84]

Hi!

As you can see in the title I use the Terratec Cinergy C HD card and I'm not abel to find all cahnnels. I only find the digital ones on the frequency 394 and 450 MHZ but no other digital ones or even the analog channels. Pleas help me to find the right settings!


Enclosed you find a digital and a anlog channel list of my provider.

http://weasel.freeunix.net/glfusion/publ....php?lid=2

http://weasel.freeunix.net/glfusion/publ....php?lid=3

Thank you!

[Graham]

Do channel scans in config.exe and then post your logs ...

http://forums.nextpvr.com/showthread.php?t=16767

[weasel84]

here you are!

thanking you in anticipation for your endeavours to assist!

[sub]

Try placing the .ini attached file in your c:\program files\devnz\gbpvr\bda\dvb-c directory, and edit your capture source settings to select the region "All Countries"/"All Frequencies (6.900MBd SR, QAM 256)"

[weasel84]

with your ini file I only find the channels on 378 MHZ! :confused:

I checked the frequencys in your ini file and in the channelslist from my provider and all frequencys are included.

[Graham]

The config native log has ...

2010-02-28 18:14:31.314 VERBOSE DVB-C CarrierFrequency:378000 SymbolRate:6900 Modulation:11
2010-02-28 18:14:31.314 VERBOSE Submit-DVBC@3
2010-02-28 18:14:31.314 VERBOSE tuning@7
2010-02-28 18:14:31.314 VERBOSE Submit-DVBC@4
2010-02-28 18:14:32.957 VERBOSE New tuning request submitted...
2010-02-28 18:14:32.958 VERBOSE Submit-DVBC@5
2010-02-28 18:14:32.958 VERBOSE ServiceID: -1, PMT PID: -1, VPID: -1, APID: -1
2010-02-28 18:14:32.958 VERBOSE SubmitTuningRequest() complete
2010-02-28 18:14:32.958 VERBOSE ScanTransponder@2
2010-02-28 18:14:33.066 VERBOSE ScanTransponder@2
2010-02-28 18:14:33.066 VERBOSE locked=1 present=1 strength=-2000 quality=80
2010-02-28 18:14:33.066 VERBOSE ScanTransponder@4
2010-02-28 18:14:33.067 VERBOSE ScanTransponder@5
2010-02-28 18:14:33.067 VERBOSE ScanTransponder@6
2010-02-28 18:14:33.067 VERBOSE locked=1 present=1 strength=-2000 quality=80
2010-02-28 18:14:33.067 VERBOSE SIGNAL???
2010-02-28 18:14:33.067 VERBOSE ScanTransponder finished

And the same for 394 000. Signal quality of 80 may be too low to find channels.

Is there anything that you can do to improve signal quality ... remove splitters, check connections ?

[weasel84]

what a simple but useful and great solution! I removed an extension cable and now I find all digital cannels! Thank you! But there is still the problem with the analog channels. I tried to add an analog capture source but my card is not supported! Is there any other way to receive them??

[sub]

what a simple but useful and great solution! I removed an extension cable and now I find all digital cannels! Thank you!

lol - great. Glad you found the cause.

But there is still the problem with the analog channels. I tried to add an analog capture source but my card is not supported! Is there any other way to receive them??

Unfortunately the analog side of this device isnt supported. It lacks the required hardware MPEG2 encoder.

[weasel84]

I think I can live without the analog ones!

Thank you guys for your help!!!