2015-02-14, 09:10 PM
That's why I asked if you have a Prime with Cablecard it doesn't use ndigitalhost.
Martin
Martin
NextPVR Forums
Public
NextPVR Support
Legacy (v4.x and earlier)
problems with EPG update on 3.3.8, can I downgrade to 3.2.9?
problems with EPG update on 3.3.8, can I downgrade to 3.2.9?
|
2015-02-14, 09:12 PM
The data from NRECORD1.log is 2 big so I'm attaching it....
I just grabbed 3 shows close to each other in the guide that all started at 7:30 and ended at 8:00pm The 2 recorded on the Hauppauge show up as an HD home run, but my real HD Homerun was recording MASH. There is no entry when the recording stopped, but each of the 'bad' recordings was less than 10 minutes in length. MASH was the full 1/2 hour. Thanks.
2015-02-14, 09:15 PM
I have a silicon Dust HD Homerun recording from an antenna.
I also have a Hauppauge usb with cable card connected to cable. Additionally I have a K world USB tuner connected to the antenna.
2015-02-14, 09:25 PM
The Hauppauge DCR devices are a HDHomeRun, which is why they show up this way.
2015-02-14, 09:53 PM
(This post was last modified: 2015-02-14, 10:31 PM by mvallevand.)
TomPyd Wrote:oh...the Hauppauge shows up as hdhr too....very confusing. Yes but I think your problem is it is trying to play through the HDHR Prime interface. If you disable those does it work? I am probably wrong though I was getting confused by sub's logging of the DCR as an HDHR and you call it a USB tuner. You will need to fix this error with your Hauppauge 2015-02-08 20:40:54.098 [DEBUG][8] HDHomeRunRecorder@3 2015-02-08 20:40:54.098 [DEBUG][8] About to start HDHR device. Checking status for information sake... (could tell if it's already in use elsewhere) 2015-02-08 20:40:54.098 [DEBUG][8] Executing: C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe 20105F68 get /tuner0/status 2015-02-08 20:40:54.513 [DEBUG][8] Error: unable to connect to device 2015-02-08 20:40:55.518 [DEBUG][8] SetTarget@2 2015-02-08 20:40:55.518 [DEBUG][8] Executing: C:\Program Files\Silicondust\HDHomeRun\hdhomerun_config.exe 20105F68 set /tuner0/vchannel 802 2015-02-08 20:40:55.943 [DEBUG][8] Error: unable to connect to device Martin
2015-02-15, 02:37 AM
Hey Martin,
So...intersesting.....when I recorded a different program on each of the 3 tuners, they all come through ok. I know that recording 2 programs simultaneously on the Hauppauge DCR works, so it's weird that 2 on the DCR and one on the HD homerun screws up the Hauppauge recordings... At least I know now if I want to record 3 things, I need to use all 3 tuners. That rarely happens, but its' good to know the workaround. |
|
|
