When changing the channel in Kodi's guide it will sometimes go to channel 2.

[paulofcorinth]

If it works with increased delay don't worry too much

I'd try the commands manually from the command line

"C:\Program Files (x86)\NPVR\HaupBlast.exe" 297
"C:\Program Files (x86)\NPVR\HaupBlast.exe" 296
"C:\Program Files (x86)\NPVR\HaupBlast.exe" 123

to see if the box sleeps overnight and it would be useful to watch the OSD or the front panel of the STB to see what is going on.

Martin

Looks like this might be the case. I noticed today it happens after the box has been unused for a significant as mount of time. Can you please post the code for your batch file and how you set it up?

[paulofcorinth]

Even with the delay it happened again and it appears to happen after the stb has been left idle for an extended period. It gets the first digit to wake up and remembers it but loses the last two. There aren't any sleep settings on the box unfortunately.

[mvallevand]

I don't have it anymore but if you save this as Haupblast.bat and call it it will tune twice with a 5 second delay. You will have to figure out if 5 seconds is enough orr too much.

Code:

"C:\Program Files (x86)\NPVR\HaupBlast.exe" %1
timeout 5 /t
"C:\Program Files (x86)\NPVR\HaupBlast.exe" %1

Martin

[paulofcorinth]

I don't have it anymore but if you save this as Haupblast.bat and call it it will tune twice with a 5 second delay. You will have to figure out if 5 seconds is enough orr too much.

Code:

"C:\Program Files (x86)\NPVR\HaupBlast.exe" %1
timeout 5 /t
"C:\Program Files (x86)\NPVR\HaupBlast.exe" %1

Martin

I have it saved as a batch file but when I try to attach it as the channel changer executable option under Analog Recorder Settings it will not allow me to and will only allow me to attach an executable. Is there another way I run it? Possibly under Task Scheduler? Thank you again for all your help!

[paulofcorinth]

I figured it out. In the part I was I trying to put it in you have to start typing in the name of the executable after navigating to the directory and it automatically fills it in. I will give this a shot and let you know. Thank you.

[paulofcorinth]

Good news, this has completely solved my problem! I had to give it some time to test and make sure but after having witnessed it go to channel 2 or 3 then to the correct one I am confident my problem is solved. Thank you everyone for your help. I really appreciate it.