Request for supporting Ceton devices on Linux

[mvallevand]

I have no explanation why the Ceton isn't working for you. I am assuming you aren't stopping opendct and you are giving it enough time to discover the devices. Previous logs where still initializing some thing.

In C:\ProgramData\OpenDCT\config\opendct.properties the author did recommend changing "error_videos_enabled=true to error_videos_enabled=false" because of issues with the Ceton tuner device. You can try stopping the server making the change and restarting the server giving it a few minutes to start up.

One final thing would be to send that file and I can compare it with mine.

Martin

[run088]

OpenDCT 0.5.29

Loaded Capture Devices:

DCT-Ceton InfiniTV PCIe (00-80-0d-5a) Tuner 1: Idle
DCT-Ceton InfiniTV PCIe (00-80-0d-5a) Tuner 2: Idle
DCT-Ceton InfiniTV PCIe (00-80-0d-5a) Tuner 3: Idle
DCT-Ceton InfiniTV PCIe (00-80-0d-5a) Tuner 4: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 1: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 2: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 3: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 4: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 5: Idle
DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 6: Idle

[mvallevand]

Good the last logs you send me didn't go that far.

Martin

[run088]

latest

[mvallevand]

As I said before I need the opendct.log the extras logic seems to be working.

Martin

[run088]

latest

[mvallevand]

For the windows version if you are still using it could you enable the logging in opendct.bat by changing two lines so that they looks like this

set logfile=C:\Users\Public\NPVR-data\logs\opendct-%3.log rem set logfile=NUL

then try a test and send the error file C:\Users\Public\NPVR-data\logs\opendct78##.log file that the test creates.

Martin

[run088]

change this to this?


@echo off
set opendct=C:\Users\Public\NPVR-data\scripts\opendct.py
rem set logfile=C:\Users\Public\NPVR-data\logs\opendct-%3.log
set logfile=NUL
python %opendct% "START" %2 %1 %3 2> %logfile%
python %opendct% "GET_SIZE" %2 2>> %logfile%
python %opendct% "STOP" %2 2>> %logfile%


@echo off
set opendct=C:\Users\Public\NPVR-data\scripts\opendct.py
set logfile=C:\Users\Public\NPVR-data\logs\opendct-%3.log
rem set logfile=NUL
python %opendct% "START" %2 %1 %3 2> %logfile%
python %opendct% "GET_SIZE" %2 2>> %logfile%
python %opendct% "STOP" %2 2>> %logfile%

[mvallevand]

Yes.

Martin

[run088]

I looked and noticed one thing in this log. Ips should line up on the ceton cards

192.168.2.250/192.168.2.251
and
192.168.2.240/192.168.2.241

but I see this that shouldnt be happening

  InfiniTVCaptureDevice - Encoder Manufacturer: 'Ceton', Number: 2, Remote IP: '192.168.2.250', Local IP: '192.168.2.241', CableCARD: true, Lineup: 'dct_infinitv', Offline Scan Enabled: false, RTP Port: 8426
09:19:02.189 [cling-17] INFO  SageTVManager - The capture device 'DCT-Ceton InfiniTV PCIe (00-80-84-b9) Tuner 2' is ready.


and I see places 192.168.200.2 which would be the natural dhcp of the card.