2nd HDHR BDA device scan

[VCR58]

My setup has two HDHR devices, each with two tuners. I can scan one tuner of the 1st HDHR device and copy the channels to the  second tuner which is normal.

When I do a channel scan on the second HDHR device on a tuner and then copy the channels to the second tuner it copies the channels from the first HDHR device instead of the device I am scanning.

This only is an issue with the BDA tuners. The HDHR tuners work as expected.

Attached are logs of the scans

[sub]

NextPVR has a feature where if you set up channels on one tuner (an 'ATSC' tuner for this example), then when you click on an empty tuner of the same type, it asks if you want to copy the configuration from the existing tuner of the same type (this could have been from any device - it doesn't not explicitly try to copy from another tuner on the same device). If this is not going to work in your setup, because you have tuners of the same type that receive different channels (like antennas pointing different directions), then you're probably going to need to separately scan each tuner, then use the Advanced Tools -> AutoMerge feature.

[VCR58]

Ok that makes sense.

Thanks for the reply.