adapter0-DVB-T-channels.conf replaced not updated

[SteveGBuck]

Just installed NextPVR (tried on both Debian 10 and Ubuntu 20) using USB DVB-T tuner. Verion Version: 5.1.1.210329 using the install method described in this forum.

When I do a channel scan for my region I get all the channel results I'm expecting to see in the web GUI but not all of them are in the adapter0-DVB-T-channels.conf file.  If I do another scan I might catch some of the missing configs for channels but then others are missing.

I can't figure out how to get the adapter0-DVB-T-channels.conf file to be updated with new channels found rather than replace the entire file with the latest scan each time.

any ideas?

[mvallevand]

What happens when you click save? You should not lose anything.

Martin

[SteveGBuck]

The channels are all saved in the Web GUI no issue.  But the config for some of the channels are missing in adapter0-DVB-T-channels.conf so I just get an error if I try to play that channel.

[mvallevand]

Scan, save and submit zipped logs required for full support.

Martin

[SteveGBuck]

Attached.  Thanks.

[SteveGBuck]

Here's an example of my .conf (I've grepped for HD channels just to test).


Scan 1:

Code:

stevebuck@Umbridge:/var/opt/nextpvr$ cat adapter0-DVB-T-channels-scan.conf | grep HD [BBC TWO HD] [BBC ONE HD] [CBBC HD] [BBC NEWS HD] [QVC HD] [QVC Beauty HD]

Scan 2 (same settings - all I did was scan again):

Code:

stevebuck@Umbridge:/var/opt/nextpvr$ cat adapter0-DVB-T-channels-scan.conf | grep HD [BBC TWO HD] [BBC ONE HD]

If I saved that scan I would not be able to play the 4 channels removed from scan 1 because they get removed in the .conf file.

[mvallevand]

Even if you don't click save if they aren't in the conf file the stations aren't usable. I would back it up and hit save anyway since the stations are in the scan.

Martin

[SteveGBuck]

I’m not sure I totally follow? Sorry.

Even scan 1 didn’t bring back all the possible HD channels (e.g ITV1 HD is missing). If I keep scanning it will find it eventually but I’m never able to get all the channels in a single scan so that they’re all stored in the .conf file.

Or you saying I should create my own .conf file from multiple scans?

I had similar behaviour with Tvheadend but there it can be configured to continually scan and add channels when found so not an issue.

I don’t think it’s a signal problem. They all play fine once captured. Maybe my tuner is too slow to switch muxes so skips some channels?

[mvallevand]

I'm saying the scan you provided had many HD channels in their text.

Code:

19:29:33:243 [DEBUG] ~17472~BBC TWO HD~(null)~25~545833000OFF~102 19:29:33:243 [DEBUG] ~17540~BBC ONE HD~(null)~25~545833000OFF~101 19:29:33:243 [DEBUG] ~17604~ITV HD~(null)~25~545833000OFF~103 19:29:33:243 [DEBUG] ~17664~Channel 4 HD~(null)~25~545833000OFF~104 19:29:33:243 [DEBUG] ~17728~Channel 5 HD~(null)~25~545833000OFF~105 19:29:33:243 [DEBUG] ~18112~CBBC HD~(null)~25~545833000OFF~204 19:30:28:618 [DEBUG] ~40960~BBC NEWS HD~(null)~25~746000000OFF~107 19:30:28:618 [DEBUG] ~40976~BBC FOUR HD~(null)~25~746000000OFF~106 19:30:28:618 [DEBUG] ~40992~CBeebies HD~(null)~25~746000000OFF~205 19:30:28:618 [DEBUG] ~41040~QUEST HD~(null)~25~746000000OFF~114 19:30:28:618 [DEBUG] ~41056~QVC HD~(null)~25~746000000OFF~111 19:30:28:618 [DEBUG] ~41064~QVC Beauty HD~(null)~25~746000000OFF~112 19:30:28:618 [DEBUG] ~41296~RT HD~(null)~25~746000000OFF~113

So I wanted you to click Save. I am not sure if the temporary scan.conf overwrites the regular conf file or not, I seem to remember being able to do multiple scans without losing channels.

Martin

[SteveGBuck]

I see.

Yes, every time I run the scan the GUI reports all those channels but seems to be a random amount actually get saved in the config file. And the config file is overwritten each time in my experience.

So as a test. I just removed all channels.

Did a fresh scan and came back with all the channels I'm expecting to see.  I selected and saved only the HD ones in the GUI.

So I now have 13 HD channels showing in my GUI.

But this is the contents of my adapter0-DVB-T-channels.conf file (just 7 of the 13 HD channels):

Code:

stevebuck@Umbridge:/var/opt/nextpvr$ cat adapter0-DVB-T-channels.conf | grep HD [BBC TWO HD] [BBC ONE HD] [Channel 4 HD] [Channel 5 HD] [CBBC HD] [BBC NEWS HD] [BBC FOUR HD]

Log attached (logs-202110405-2057.zip).

I then run a new scan.

All the channels appear again in the web GUI.  Again I select just the HD channels and save (now I have 26 HD channels in my list - all duplicates of the first 13 HD channels.

And now this is the contents of my adapter0-DVB-T-channels.conf file (I've now lost BBC ONE HD, but gained RT HD).

Code:

stevebuck@Umbridge:/var/opt/nextpvr$ cat adapter0-DVB-T-channels.conf | grep HD [BBC TWO HD] [Channel 4 HD] [Channel 5 HD] [CBBC HD] [BBC NEWS HD] [BBC FOUR HD] [RT HD]

Log attached (logs-20210405-2103.zip).