2021-05-29, 08:25 AM
Good Morning,
so...I have NextPVR server running as backend for KODI, newest version...it's 5.1.1 i think.
My sat>ip setup is
Selfsat dish => Kathrein Exip 418 => {LAN/Switch/Router} => Mini PC (server & client) => TV
( where Router is a Speedport hybrid router from German Telekom and Switch is a TPLink)
Works great. As long as I run NextPVR with using a .m3u file. Kodi (with NextPVR plugin) will see all the channels, everything fine.
I just want to get away from that external XMLTV EPG. As far as I understand, using a .m3u file to address channels on the Exip moves us towards "IPTV" and there is no over the air EPG for IPTV. (don't know if this is correct, it's what I understand)
So I though I try to scan the Exip tuner devices that show up in NextPVR instead of using a .m3u file. Unfortunately the scan doesn't find ANY channels on the exip.
I'll include a log to this post. Seems like the scan for each frequency runs into an error (mostly something with non-connected sockets).
Would be great if somebody of you could have a look on this.
I would even fill services manually (a few, just to test if it'll work and if over-the-air EPG does it's job). I mean, I know all the frqs, transponders, service names and whatever... I just don't know how ;-)
Forgot to mention: tried this with the most current NextPVR version and with 5.0.6. Tried it also with KODI switched off (Mini-PC acting as server only). Restartet Exip a dozends of times, Restartet the PC a dozends of times and ..... disconnected the entire setup from power, restarted everything. No change in behaviour.
Thanks in advance
Cheers
Rudi
so...I have NextPVR server running as backend for KODI, newest version...it's 5.1.1 i think.
My sat>ip setup is
Selfsat dish => Kathrein Exip 418 => {LAN/Switch/Router} => Mini PC (server & client) => TV
( where Router is a Speedport hybrid router from German Telekom and Switch is a TPLink)
Works great. As long as I run NextPVR with using a .m3u file. Kodi (with NextPVR plugin) will see all the channels, everything fine.
I just want to get away from that external XMLTV EPG. As far as I understand, using a .m3u file to address channels on the Exip moves us towards "IPTV" and there is no over the air EPG for IPTV. (don't know if this is correct, it's what I understand)
So I though I try to scan the Exip tuner devices that show up in NextPVR instead of using a .m3u file. Unfortunately the scan doesn't find ANY channels on the exip.
I'll include a log to this post. Seems like the scan for each frequency runs into an error (mostly something with non-connected sockets).
Would be great if somebody of you could have a look on this.
I would even fill services manually (a few, just to test if it'll work and if over-the-air EPG does it's job). I mean, I know all the frqs, transponders, service names and whatever... I just don't know how ;-)
Forgot to mention: tried this with the most current NextPVR version and with 5.0.6. Tried it also with KODI switched off (Mini-PC acting as server only). Restartet Exip a dozends of times, Restartet the PC a dozends of times and ..... disconnected the entire setup from power, restarted everything. No change in behaviour.
Thanks in advance
Cheers
Rudi