Missing listings

[WagMan]

My EPG is missing listings for  Channel 8.1-8.6 (8.1 is Fox)and PBS 12.1-12.4. There may be others as well, but they are stations I don't watch, so I don't know if I normally get those. I defiantly normally get 8 and 12.  In fact, before doing a complete reinstall of Linux and NextPVR I had the days listing currently missing. That reinstall seems to be what triggered this issue.  System info: System:
  Kernel: 5.15.0-522304060810-generic x86_64 bits: 64 compiler: gcc v: 11.3.0
    Desktop: Cinnamon 5.4.8 tk: GTK 3.24.33 wm: Mutter dm: LightDM Distro: Linux Mint 21 Vanessa
    base: Ubuntu 22.04 jammy
Machine:
  Type: Desktop System: Hewlett-Packard product: HP ProDesk 600 G1 SFF v: N/A
    serial: <superuser required> Chassis: type: 4 serial: <superuser required>
  Mobo: Hewlett-Packard model: 18E7 serial: <superuser required> UEFI: Hewlett-Packard
    v: L01 v02.65 date: 07/13/2015
CPU:
  Info: dual core model: Intel Pentium G3240 bits: 64 type: MCP arch: Haswell rev: 3 cache:
    L1: 128 KiB L2: 512 KiB L3: 3 MiB
  Speed (MHz): avg: 3093 min/max: 800/3100 cores: 1: 3093 2: 3093 bogomips: 12371
  Flags: ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3
Graphics:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics
    vendor: Hewlett-Packard driver: i915 v: kernel ports: active: HDMI-A-2
    empty: DP-1, DP-2, HDMI-A-1, VGA-1 bus-ID: 00:02.0 chip-ID: 8086:0402
  Display: x11 server: X.Org v: 1.21.1.3 driver: X: loaded: modesetting unloaded: fbdev,vesa
    gpu: i915 display-ID: :0 screens: 1
  Screen-1: 0 s-res: 1920x1080 s-dpi: 96
  Monitor-1: HDMI-2 mapped: HDMI-A-2 model: SE22FE01 res: 1920x1080 dpi: 30 diag: 546mm (21.5")
  OpenGL: renderer: Mesa Intel HD Graphics (HSW GT1) v: 4.6 Mesa 22.0.1 compat-v: 3.1
    direct render: Yes
Audio:
  Device-1: Intel Xeon E3-1200 v3/4th Gen Core Processor HD Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:03.0 chip-ID: 8086:0c0c
  Device-2: Intel 8 Series/C220 Series High Definition Audio vendor: Hewlett-Packard
    driver: snd_hda_intel v: kernel bus-ID: 00:1b.0 chip-ID: 8086:8c20
  Sound Server-1: ALSA v: k5.15.0-522304060810-generic running: yes
  Sound Server-2: PulseAudio v: 15.99.1 running: yes
  Sound Server-3: PipeWire v: 0.3.48 running: yes
Network:
  Device-1: Intel Ethernet I217-LM vendor: Hewlett-Packard driver: e1000e v: kernel port: f080
    bus-ID: 00:19.0 chip-ID: 8086:153a
  IF: eno1 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives:
  Local Storage: total: 2.95 TiB used: 13.46 GiB (0.4%)
  ID-1: /dev/sda vendor: PNY model: CS900 240GB SSD size: 223.57 GiB speed: 6.0 Gb/s
    serial: <filter>
  ID-2: /dev/sdb vendor: Western Digital model: WD30EZRX-00D8PB0 size: 2.73 TiB speed: 6.0 Gb/s
    serial: <filter>
Partition:
  ID-1: / size: 86.92 GiB used: 13.43 GiB (15.4%) fs: ext4 dev: /dev/sda5
  ID-2: /boot/efi size: 96 MiB used: 30.3 MiB (31.5%) fs: vfat dev: /dev/sda1
Swap:
  ID-1: swap-1 type: file size: 2 GiB used: 0 KiB (0.0%) priority: -2 file: /swapfile
Sensors:
  System Temperatures: cpu: 29.8 C mobo: 27.8 C
  Fan Speeds (RPM): N/A
Repos:
  Packages: apt: 2123
  No active apt repos in: /etc/apt/sources.list
  Active apt repos in: /etc/apt/sources.list.d/b-rad-kernel_mediatree_hauppauge-jammy.list
    1: deb http: //ppa.launchpad.net/b-rad/kernel+mediatree+hauppauge/ubuntu jammy main
  Active apt repos in: /etc/apt/sources.list.d/official-package-repositories.list
    1: deb http: //packages.linuxmint.com vanessa main upstream import backport
    2: deb http: //archive.ubuntu.com/ubuntu jammy main restricted universe multiverse
    3: deb http: //archive.ubuntu.com/ubuntu jammy-updates main restricted universe multiverse
    4: deb http: //archive.ubuntu.com/ubuntu jammy-backports main restricted universe multiverse
    5: deb http: //security.ubuntu.com/ubuntu/ jammy-security main restricted universe multiverse
Info:
  Processes: 236 Uptime: 1d 21h 5m Memory: 15.52 GiB used: 3.88 GiB (25.0%) Init: systemd v: 249
  runlevel: 5 Compilers: gcc: 11.2.0 alt: 11 Client: Cinnamon v: 5.4.8 inxi: 3.3.13 I attached my logs. I also looked at raw data on the CD site, and see info on these stations. I don't know how to send that, so I'll just pasted them bellow. Thanks for the help.
<station id='36128'>
<callSign>WVUEDT</callSign>
<name>WVUE-DT</name>
<affiliate>Fox Affiliate</affiliate>
<fccChannelNumber>29</fccChannelNumber>
</station>.......................................</station>
<station id='44232'>
<callSign>WGMBDT</callSign>
<name>WGMB-DT</name>
<affiliate>Fox Affiliate</affiliate>
<fccChannelNumber>24</fccChannelNumber>..........</station>
<station id='44907'>
<callSign>WYESDT</callSign>
<name>WYES-DT</name>
<affiliate>PBS Affiliate</affiliate>
<fccChannelNumber>11</fccChannelNumber>..........</station>
<station id='44907'>
<callSign>WYESDT</callSign>
<name>WYES-DT</name>
<affiliate>PBS Affiliate</affiliate>
<fccChannelNumber>11</fccChannelNumber>
</station>
<station id='44909'>
<callSign>WYESDT4</callSign>
<name>WYES-DT4</name>
<affiliate>Independent</affiliate>
<fccChannelNumber>11</fccChannelNumber>
</station>
<station id='48864'>
<callSign>WDSUDT2</callSign>
<name>WDSU-DT2</name>
<affiliate>Independent</affiliate>
<fccChannelNumber>19</fccChannelNumbe...........</station>
<station id='44907'>
<callSign>WYESDT</callSign>
<name>WYES-DT</name>
<affiliate>PBS Affiliate</affiliate>
<fccChannelNumber>11</fccChannelNumber>
</station>
<station id='44909'>
<callSign>WYESDT4</callSign>
<name>WYES-DT4</name>
<affiliate>Independent</affiliate>
<fccChannelNumber>11</fccChannelNumber>
</station>
<station id='48864'>
<callSign>WDSUDT2</callSign>
<name>WDSU-DT2</name>
<affiliate>Independent</affiliate>
<fccChannelNumber>19</fccChannelNumber>

[mvallevand]

Don't paste snippets, attach the zipped logs from the main Settings web page and zip up anything else you want to post.

Your EPG source is a joke though, no major and minor and I suspect the channel names don't auto map so you need to do them manually. You were using Schedule Direct and it is the easiest to use and worth the subscription in North America.

If you must use XMLTV maybe try the HDHRGuide utility I wrote. You can use the guide data on all digital channels

Martin

[WagMan]

Don't paste snippets, attach the zipped logs from the main Settings web page and zip up anything else you want to post.

Your EPG source is a joke though, no major and minor and I suspect the channel names don't auto map so you need to do them manually.  You were using Schedule Direct and it is the easiest to use and worth the subscription in North America.

If you must use XMLTV maybe try the HDHRGuide utility I wrote.  You can use the guide data on all digital channels

Martin

I use SD. No way I would ever deal with all of the work of using XMLTV with how cheap SD is. Especially since it's a non-profit that supports Open source programing. All of that data(sorry for not zipping it) comes from the SD website. Everything automapped correctly. Nearly every chnnell shows as mapped to SD.The stations I'm not getting listings for show as getting epg data from SD.  Is there a way to tell if SD is actually sending listings? Could the issue be on there end?

[mvallevand]

Ok, that's why we ask for the NextPVR zipped logs not snippets then we don't have to make assumptions.

What you probably did it used the cable or satellite listing and not the OTA listing which likely explains why the mapping isn't working. It will be at the bottom of the list USA-OTA-70... After selecting that go tot Settings-Channels and reset all ATSC to None and then automap to the good lineup.

Martin

[WagMan]

Ok, that's why we ask for the NextPVR zipped logs not snippets then we don't have to make assumptions.

What you probably did it used the cable or satellite listing and not the OTA listing which likely explains why the mapping isn't working.  It will be at the bottom of the list USA-OTA-70...  After selecting that go tot Settings-Channels and reset all ATSC to None and then automap to the good lineup.

Martin

Nope, I had it set to OTA for my zip code. I checked it multile times. If I had it set to satellite or cable I wouldn't have gotten sub-channels on the stations I did get. There is no 6.1, 6.2 or 6.3 on satellite or cable. The listings came through last night. I suspect CD  had an issue with listings for my area and must have resolved it. Guess I should have use the link on there page for notifying them about listing problems. But I wasn't sure.

[mvallevand]

Scanning major.minor has nothing to the EPG source you are using. You really need to send zipped logs when you want help in the future.

Martin